Bilstein R, 1996. Stage Of Saturn. Washington, DC: U.S.Government Printing Office.
Calliester, W.D. and Rethwisch, D. G, 2014. Materials Science and Engineering. 9 ed.
New York: John Wiley and Sons, inc.
Dewi, Y. P, 2016. Pengaruh Komposisi Pada Sifat Struktur dan Superkonduktivitas Fe(Se,Te) Dipreparasi dengan Metode Metalurgi Serbuk. Surabaya:
Perpustakaan UNAIR.
E. Surojo, Jamasri, V. Malau And M. N, 2014. Effects Of Phenolic Resin And Fly Ash On Coefficient Of Friction Of Brake Shoe Composite Ilman. Department Of Mechanical And Industrial Engineering, Gadjah Mada University.
Indonesia.
Fitriandhani. R, 2019. Pengaruh Variasi Suhu Sintering dan Komposisi Stoikiometri Terhadap Pembentukan Fasa β-FeSe Melaluin Pemaduan Mekanik dan Proses Reaksi Padatan. Jakarta: STT PLN.
Flukiger. R, 2012. Overview of Superconductivity and Challenges in Applications.
CERN. TE–MSC Geneva 1211. Switzerland.
Gati E, Xiang L, 2019. Role of the Fermi surface for the pressure-tuned nematic transition in the BaFe2As2 family. USA: Physical Review.
H. Okamoto,1991. The FeSe (iron-selenium) system. Alloy Phase Diagrams Volum 3 of the ASM Handbook. 858-859.
Hsu, Fong-Chi, 2008. Superconductivity in The PbO-Type Structure α-FeSe. Institute of Physics, Academia Sinica, Nankang, Taipei 115, Taiwan.
Ibnuwibowo, A, 2012. Pengaruh Waktu Sintering terhadap Karakteristik
Mekanik Komposit HDPE-Sampah Organik. Surakarta: Universitas Sebelas Maret.
Ilham Maulana, Muhammad, 2019. Sintesis dan Analisis Penambahan Magnesium (Mg) Pada Material Superkonduktor FeSe dengan Metode Reaksi Padatan Dalam Tabung Tertutup. Balikpapa : Institut Teknologi Kalimatan.
Imaduddin, Agung dkk. 2014. Analisa Hambatan Jenis Listrik pada Kawat Superkonduktor dengan Memakai Alat Cryogenic. Tangerang: LIPI.
Imaduddin, A, Nisa, K, Yudanto, S, D,. 2017. Effect of Te doping on FeSe
superconductor synthesized by powder-in-tube. Journal of Physics: Conference Series. Tangerang: LIPI.
Ismunandar dan C. Sen, 2002. Mengenal Superkonduktor. (Jurnal Online LIPI).
Diakses 29 November 2019. http://www.fisikanet.lipi.go.id/utma.cgi.
K.H. Bennemann dan J.B. Ketterson, 2008. Superconductivity. Departement of Physics, German and Departement of Physics & Astronomy, USA.
Kamihara Y. T. Watanabe, M. Hirano, H. Hosono. et al, 2008. Superconductors.
J.AM. Chem. Soc. 130: 3296.
Kamerlingh Onnes, H. 1911. On the Sudden Change in The Rate at Which the Resistance of Mercury Disappears. Communications from the Physical Laboratory of the University of Leiden, 124c (Nov. 1911); English translation in KNAW Proceedings, 14II. Amsterdam 1912, pp. 818-821.
Kanungo, Sikha, 2013. Synthesis and Characterization of Gd Doped BSCCO-2212.
India : National Institute of Technology Rourkela.
Karima, Hadrian dan Wahyono Suprapto, 2009. Pengaruh Besar Tekanan
Compacting Pada Silinder Serbuk Duralumin Powder Metallurgy Terhadap Kekerasan Dan Porositas. Jurusan Teknik Mesin. Fakultas Teknik Universitas Brawijaya Malang.
Kaufman, Milton and Seidman, A. H. 1978. Handbook for Electronics Engineering Technicians. McGraw-Hill Book Company : New York.
Lan, F. et al., 2014. The formation of nano-layered grains and their enhanced superconducting transition temperatur in Mg-doped FeSe0,9 bulks.
Scientific Reports. page. 1-5.
Ma, Qingshuang, Li, X, Ma, Z,. 2019. Effect of Nb doping on the microstructure and superconducting properties of FeSe. Journal Elsevier. China.
Mizuguchi, Yoshikazu dan Yoshihiko Takano, 2010. A Review of Fe Chalcogenide Superconductors: The Simplest Fe-Based Superconductor.
Mousavi, C. R. M. Grovenor and S. C. Speller, 2014. Structural parameters affecting superconductivity in iron chalcogenides. Maney on behalf of the institute:
Institute of Materials, Mineral and Mining.
Nayiroh, N., 2015. METALURGI-SERBUK.pdf. [Online] Available at: http://
nurun.lecturer.uin-malang.ac.id/wp-content/uploads/sites/7/2015/09/
METALURGI-SERBUK.pdf [diakses 29 November 2019].
Pikatan, S, 1989. Mengenal Suprkonduktor. Kristal, Issue No. 3, page. 1-6.
Puri, R.K, 2008. Solid State Physics. S. Chand : New Delhi.
Qiu, W. et al., 2016. Tuning Superconductivity in FeSe Thin Films Via Magnesium Doping. ACS Applied Materials and Interfaces, VIII(12). page 7891-7896.
Rey, Christopher. 2015. Superconductors in the Power Grid Materials and
Applications. Woodhead Publishing is an imprint of Elsevier. USA. Page 18, 30-31.
Robert, G, Zinkle, S,. 2019. Structural Alloys for Nuclear Energy Applications.
Elsevier Inc. All rights reserved. United Kingdom.
Rusianto, Toto, 2009. Hot Pressing Metalurgi Serbuk Aluminium Dengan Variasi Suhu Pemanasan. Teknik Mesin. Fakultas Teknologi Industri Institu Sains dan Teknologi Akprind. Yogyakarta.
Suminar. 2010. Instrumentasi Difraksi Sinar-X. Surabaya: Laboratorium studi energi dan rekayasa, ITS.
Suryani, D., 2016. Sintesis Bahan Piezoelectric Ramah Lingkungan Berbasis Bi0,5Na0,5Ti3 Menggunakan Metode Solid State Reaction dengan Penambahan Dopan Ta2O5. Medan: Universitas Sumatera Utara.
Smits, F.M. 1957. Measurement of sheet resistivities with the four-point probe.
Wang Qingyang, Yan Guo, Andre, Sulpice, Eric Mossang, Xiong Xiaomei, Liu Guoqing, Jiao Gaofeng, Zhang Pingxiang, 2012. Influence of Amorphous Carbon Doping on Superconductivity of MgB2/Nb/Cu Wires. Rare Metal Materials and Engineering. Volum 41.
LAMPIRAN I
PERHITUNGAN DATA PENGUJIAN 1. Stokiometri Sampel FeSe
Fe + Se → FeSe
dengan Ar Fe = 55.84 gr/mol Ar Se = 78.97 gr/mol
Penelitian ini dilakukan dengan subsitusi atom Iron (Fe) dengan atom Selenium (Se) Sehingga menjadi FeSe dengan perbandingan 1:1. Untuk membuat 1 gram sampel FeSe diperoleh perhitungan sebagai berikut :
gr Fe : gr Se
(mol x Mr [Fe]) : (mol x Mr [Se]) (1 x 55.85) : (1 x 78.96)
55.85 gr : 78.96 gr
2. Stoikiometri Sampel FeSeNb0.01
Fe + Se + 0.01Nb → FeSeNb0.01
dengan Ar Fe = 55.84 gr/mol Ar Se = 78.97 gr/mol Ar Nb = 92.90 gr/mol
Penelitian ini dilakukan dengan subsitusi atom Potassium kedalam atom FeSe sehingga dapat dituliskan FeSeNb0.01 dengan x = 1; 1; 0.01.
Untuk membuat 1 gram sampel FeSeNbx diperoleh perhitungan sebagai berikut:
gr Fe : gr Se : gr Nb
(mol x Mr [Fe]):(mol x Mr [Se]):(mol x Mr [Nb]) (1 x 55.84) : (1 x 78.96): (0.01 x 92.90)
55.84 gr : 78.96 gr : 0.929 gr
Untuk membuat 10 gram sampel FeSeNb0.1, diperoleh perhitungan:
-Fe = 10 x 55.84 / [55.84 + 78.96 + 0.929]
= 4.11408 gr
-Se = 10 x 78.96 / [55.84 + 78.96 + 0.929]
= 5.81747 gr
-0.1Nb= 10 x 0.929 / [55.84 + 78.96 + 0.929]
= 0.06844 gr
3. Stoikiometri Sampel Mg0.01Fe0.99Se 0.01Mg + 0.99Fe + Se → Mg0.01Fe0.99Se dengan Ar Fe = 55.84 gr/mol
Ar Se = 78.97 gr/mol Ar Mg =24.305 gr/mol
Penelitian ini dilakukan dengan subsitusi atom Potassium kedalam atom FeSe sehingga dapat dituliskan Mg0.01Fe0.99Se dengan x = 0.01; 0.99; 1.
Untuk membuat 1 gram sampel MgxFe1-xSe diperoleh perhitungan sebagai berikut:
Mg gr : gr Fe : gr Se
(mol x Mr [Mg]):(mol x Mr [Fe]):(mol x Mr [Se]) (0.01 x 24.305) : (0.99 x 55.84) : (1 x 78.97) 0.243 gr : 55.2816 gr : 78.97 gr
Untuk membuat 5 gram sampel Mg0.05Fe0.95Se, diperoleh perhitungan:
-0.05Mg = 5 x 0.243 / [0.243 + 55.2816 +78.97]
= 0.009 gr
-0.95Fe = 5 x 55.2816 / [0.243 + 55.2816 +78.97]
= 2.055 gr
-Se = 5 x 78.97 / [0.243 + 55.2816 +78.97]
= 2.935 gr
4. Stoikiometri Sampel FeSe0.99I0.01
Fe + 0.99Se + 0.01I → FeSe0.99I0.01
dengan Ar Fe = 55.84 gr/mol Ar Se = 78.97 gr/mol Ar I = 126.90 gr/mol
Penelitian ini dilakukan dengan subsitusi atom Potassium kedalam atom FeSe sehingga dapat dituliskan FeSe0.99I0.01 dengan x = 1; 0.99; 0.01.
Untuk membuat 1 gram sampel FeSeNbx diperoleh perhitungan sebagai berikut:
gr Fe : gr Se : gr I
(mol x Mr [Fe]):(mol x Mr [Se]):(mol x Mr [I]) (1x 55.84) : (0.99 x 78.97): (0.01 x 126.90) 55.84 gr : 78.1803 gr : 1.269 gr
Untuk membuat 0.5 gram sampel FeSe0.995I0.005, diperoleh perhitungan:
-Fe = 0.5 x 55.84/ [55.84 + 78.1803 + 1.269]
= 0.2063 gr
-0.995Se = 0.5 x 78.1803 / [55.84 + 78.1803 + 1.269]
= 0.2889 gr
-0.005I= 0.5 x 1.269 / [55.84 + 78.1803 + 1.269]
= 0.0046 gr
LAMPIRAN II