A Simple Instrumentation System for Large Structure Vibration Monitoring
Teks penuh
Gambar
Dokumen terkait
In this paper, detail explanation of a new REFM sensor as well as wireless network data acquisition system using GPRS network designed and built at the Institute of High Voltage and
The measuring circuit to extract the EMG signal is designed and developed in the project rather than muscle kit sensor as the designed measuring system cost less
Preethichandra [14] have designed a multifunctional sensor as shown in Figure 9 to measure viscosity, cleanness, temperature and capacitance of engine oils, making a
LOMAQ (Low Maintenance Aquarium) project is built for fish farming with less human interface.. The project is based on a microcontroller circuit to control the circuit of
If VCS versus current of the current sensor ICS is plotted, the intercept of voltage axis happens at ICS = 0, VCS= 2.5V and the slope is 40mV/A., the equation can be written
In this paper, a modified simple first-order shear deformation theory MSFSDT is proposed to analyze the free vibration of laminated composite plate with general boundary conditions..
When a sensor sets up for zone 1 by sensing primary fire source Smoke it will get activation in zone 1 and microcontroller will receive this signal as high pulse, so the input pin of
One particularly interesting finding is that although the vibration neutralizer is a passive device which is incapable of supplying energy to a system, it appears to be as effective as
