iii
ABSTRAK
Alat pelindung diri merupakan seperangkat alat keselamatan yang digunakan untuk melindungi seluruh atau sebagian tubuh dari potensi bahaya kecelakaan. Peleburan besi baja merupakan kegiatan meleburkan besi baja sehingga dihasilkan tongkat besi (billet) untuk selanjutnya dibentuk menjadi besi ulir, besi beton, dan besi nako. Penelitian ini bertujuan untuk mengetahui faktor-faktor yang memengaruhi pemakaian alat pelindung diri (APD) pada pekerja bagian peleburan besi baja di PT. Gunung Gahapi Sakti Medan Tahun 2017.
Jenis penelitian ini menggunakan metode analitik dengan pendekatan
cross sectional. Populasi dalam penelitian ini, pekerja di bagian peleburan besi baja. Sampel dalam penelitian ini sebanyak 60 orang. Pengambilan sampel menggunakan teknik total sampel dan teknik uji statistik menggunakan uji regresi logistik berganda dengan metode Backward Stepwise.
Hasil penelitian ini menunjukkan pekerja yang berperilaku tidak memakai APD sebesar 30% dan pekerja yang berperilaku memakai APD sebesar 70%. Hasil uji statistik menunjukkan bahwa faktor-faktor yang berpengaruh terhadap pemakaian APD pada pekerja bagian peleburan besi baja di PT. Gunung Gahapi Sakti yaitu faktor pemungkin kenyamanan APD dengan nilai p=0,001 dan nilai OR = 0,055, dan faktor penguat pengawasan perusahaan dengan nilai p=0,005 dan nilai OR = 0,091.
Saran bagi pekerja agar merawat APD yang telah disediakan perusahaan, dan meningkatkan pengawasan perusahaan terhadap pemakaian APD secara konsisten dan adanya teguran secara tegas bila pekerja tidak memakai APD.
Kata kunci: Alat Pelindung Diri, Besi Baja, Faktor Pemungkin, Faktor Penguat
iv
ABSTRACT
Personal protective equipment is a set of safety tools used to protect the whole or part of the body from the potential danger of accidents. Deliquescent of iron steel is an activity of melting iron steel so that the iron rod (billet) for the next formed into iron screw, iron concrete, and iron nako. This study aims to determine the factors that affect the use of personal protective equipment (PPE) in workers melting iron steel at PT. Gunung Gahapi Sakti Medan, 2017.
This research use analytical method with cross sectional approach. The population in this study, workers in the melting iron steel section. The sample in this study were 60 people. Sampling using total sample technique and statistical test technique using multiple logistic regression test with Backward Stepwise method.
The results of this study indicate workers who do not use the PPE of 30% and workers who behave using PPE of 70%. The results of statistical tests show that the factors that affect the use of PPE on workers melting iron steel at PT. Gunung Gahapi Sakti is the factor of PPE comfort factor with p value = 0,001 and OR value = 0,055, and supervision company factor with p value = 0,005 and OR value = 0,091.
Suggestions for workers to maintain the PPE that has been provided by the company, and improve the supervision of the company use of PPE consistently and the warning explicitly if workers do not use PPE.
Keywords: Personal Protective Equipment, Iron Steel, Enabling Factor, Reinforcing Factor