18 hasil pencarian dengan kata kunci: 'design and analysis of the optimum gate size for multi cavity plastic name card injection mould'
Parameter settings and feeding system such as gate, runner and sprue inside the plastic injection mould are located by mould makers by Heuristic method. In this situation, people
N/A
Starting point to this final project, we are concentrating on just how to discover an appropriate gating size for a solitary gate in injection molding device to create the
N/A
Moldflow Plastics software is one of the tools used in simulation of plastic name card.. holder to represent the most comprehensive suite of definitive tools for
N/A
Overall in this project will more concentrate on the mould design, material selection for product and the mould base, analysis and modeling the cavity mould, measure the
N/A
This final year project entitled, “Design and Analysis of Polypropylene Plastic Name Card Holder ”. The project focused on the design and analysis of the Name Card
N/A
At the present time, mould makers are still using try and error method to locate the location of feeding system such as gate, runner and sprue inside the plastic injection mould.
N/A
This project is conducted to study about the design and machining process of fabricating core and cavity plate for two-plate family mould.. The main purpose of this project is to
N/A
Thus, by using CAD software and the implementation of concurrent engineering improve the quality design of the plastic part and reduce the lead time, cost by reducing mold
N/A
This study is focus on building cavity plate and design of feeding system for Nokia hand phone housing model 6680 that continuity of previous student project that focuses
N/A
Continuously producing a part with low quality (defect) will cause a waste in term of cost and material. By using simulation, it can reduce the occurrence of defect on
N/A
All the design parameters of family mould will be selected in order to define and determine the optimum design parameters of family mould using DOE approach and
N/A
Unigraphics software is used to design the part in 3D solid modeling and Rhinoceros software is used as post processing for meshing process, decision of mould layout, design of
N/A
DESIGN AND SIMULATION OF COOLING CHANNEL FOR PLASTIC INJECTION MOULDING.. This report submitted in accordance with requirement of the
N/A
Therefore, to understand the reasons how the defects occur during injection moulding process, the image of flow pattern of molten polymer flow in mould cavity
N/A