Biodiesel Production from Waste Palm Oil Catalyzed by Hierarchical ZSM-5 Supported Calcium Oxide | Zein | Indonesian Journal of Chemistry 21184 40269 1 PB
Teks penuh
Gambar
Dokumen terkait
Several parameters as reaction time, reaction temperature, molar ratio and weight of the catalyst must be considered in order to obtain a quality biodiesel in
In this research, the manufacture of biodiesel using CPO as raw material and petroleum benzin as solvent, a catalyst NaOH or KOH at various concentrations, with variation mole ratio
The results showed that XRD pattern of materials obtained from decomposition of Achatina fulica shell at 700 °C is similar with XRD pattern of calcium oxide standard from
also conducted a transesterification of palm oil with commercial grade CaO in a batch reactor with methanol reflux condition, at 65 o C and 7 h of reaction time with 6% catalyst,
The comparison of the physical characteristics of biodiesel produced from the transesteri fi cation of palm oil with methanol using waste capiz shell derived catalyst with those
“ One-pot Synthesis of Biodiesel from High Fatty Acid Jatropha curcas Oil Using Bio-based Basic Ionic Liquid as A Catalyst ”.. “ Transesterification of Soybean Oil to
The physicochemical properties of upgraded bio-oil obtained under optimum conditions showed an increase in the quality of bio-oil with a decrease in water content up to 23%, an increase
