Adinata, MC.2003. Pengukuran getaran, kebisingan, dan beban kerja pada penggunaan mesin petik the Kawasaki tipe NV-60 di pusat penelitian teh dan kina, Gambung Jawa Barat [skripsi]. Bogor: Fakultas Teknologi Pertanian, Institut Pertanian Bogor.
Ahn SJ. 2010. Discomfort of vertical whole body shock-type vibration in the frequency range of 0.5 to 16 Hz. International Journal of Automotive Technology Vol 11 No. 6 : 909−916.
Aldien Y, Marcotte P, Rakheja S, and Boileau PE. 2006. Influence of hand–arm posture on biodynamic response of the human hand–arm exposed to zh-axis vibration. International journal of Industrial Ergonomic. Vol 36 : 45-59. Besa AJ., Valeroa FJ, Sunera JL, and Carballeira J. 2007. Characterisation of the
mechanical impedance of the human hand–arm system: The influence of vibration direction, hand–arm posture and muscle tension. International Journal of Industrial Ergonomics 37 : 1225-1231.
Binisam, Kathirvel K, Manian R, Mehta CR. 2007. Influence of forward speed and terrain condition on hand transmitted vibration of power tiller. AMA, Agricultural Mechanization in Asia, Africa and Latin America. Vol 38 No 3 : 79-83.
Bruej and Kjaer. Human Vibration.
www.cyut.edu.tw/~hcchen/downdata/human%20vibration.doc [17 Januari 2013].
Burström L and Sörensson A. 1999.The influence of shock-type vibrations on the absorption of mechanical energy in the hand and arm. International Journals of Industrial Ergonomics Vol 23, Issue 5-6 : 585 -594.
Cahyono ST. 2008. Pengukuran dan analisis getaran mekanis pada proses produksi gula di stasiun putaran dan pembangkit listrik di PG Bungamayang, Lampung [skripsi]. Bogor: Fakultas Teknologi Pertanian, Institut Pertanian Bogor.
Carrasco L, Borja Sanudo B, Hoyo M. Pradas F, Da Silva ME. 2011. Effectiveness of low-frequency vibration recovery method on blood lactate removal, muscle contractile properties and on time to exhaustion during cycling at VO2max power output. Eur J Appl Physiol.
Cation S, Jack R, Oliver M, Dickey JP, and Lee-Shee NK. 2008. Six degree of freedom whole-body vibration during forestry skidder operations. International Journals of Industrial Ergonomics Vol 38, Issue 9-10 : 739 - 757.
Chen HC, Chen WC, Liu YP, Chen CY, and Pan YT. 2009. Whole-body vibration exposure experienced by motorcycle riders – An evaluation according to ISO 2631-1 and ISO 2631-5 standards. International Journals of Industrial Ergonomics Vol 39, Issue 5 : 708 - 718.
Dewangan, KN and Tewarib VK. 2009. Vibration energy absorption in the hand– arm system of hand tractor operator. Biosistem Engineering, vol 103 : 445- 454.
Eger T, Stevenson J, Boileauc PE., Salmonid A, VibRG. 2007. Predictions of health risks associated with the operation of load-haul-dump mining vehicles: Part 1—Analysis of whole-body vibration exposure using ISO 2631-1 and ISO-2631-5 standards. International Journal of Industrial Ergonomics 38 : 726–738.
Giacomin J, Fustes F. 2005. Subjective equivalence of steering wheel vibration and sound. International Journal of Industrial Ergonomics 35: 517–526. Giacomin J, hayaa MS, Dormegnie E, Richard L. A frequency weighting for
evaluation of steering wheelrotational vibration. Shefield : Department of Mechanical Engineering , The University of Shefield.
Goglia V, 2003. Hand Transmitted Vibration from the Steering Wheel to Drivers of a Small Four Wheel DriveTractor. Applied Ergonimics 34 : 45- 49.
Griffin MJ., 1990. Handbook of Human Vibration. San Diego. CA: Academic Press.
Grill SE and Hallett M.1995. Velocity sensitivity of human muscle spindle afferents and slowly adapting type II cutaneous mechanoreceptors. Journal of Physiology 489.2 : 593-602
Hacaambwa TM, Giacomin J. 2007. Subjective response to seated fore-and-aft direction whole-body vibration. International journal of Industrial Ergonomic 37 : 61 -72. Harris CM, Piersol HG. 2002. Shock and Vibration Handbook. New York. Mc Graw
Hill.
Hirt M. Elemen Mesin : Disain dan Kalkulasi dari Sambungan, Bantalan, dan Poros. Jilid I. Budiman A, Priambodo B, penerjemah; Jakarta: Penerbit Erlangga.
ISO 2631-1. 2004. Mechanical Vibration and Shock. Evaluation of Human Exposure to Whole Body Vibration. Geneve-Switzerland.
Jang HK. and Griffin MJ. 2000. Effect of Phase, Frequency, magnitude and posture on discomfort associated with differencial vertical vibration at the seat and feet. Jurnal of Sound and Vibration Vol 229, Issue 2 : 273 - 286. Jessica K. Ljungberga, and Gregory Neelya G. 2007. Stress, subjective
experience and cognitive performance during exposure to noise and vibration. Journal of Environmental Psychology 27 : 44–54.
Jiao K , Li Z, Chen M. Wang C, Qi S. 2004. Effect of different vibration frequencies on heart rate variability and driving fatigue in healthy drivers. Int Arch Occup Environ Health 77: 205–212
Kathirvel K, Binisam, Manian R, Senthikumar R. 2007. Vibration mapping of walking and riding type of power tillers. Vol 38 No 1 : 61-67.
Kihlberg S. 1995.. Biodynamic response of the hand-arm system to vibration from an impact hammer and a grinder. International Journal of Industrial Ergonomics 16 : 1-8.
Kim KW, Kim MS, and Yoo WS. 2009. Development of frequency weighting function for Asian (Korean) people in vertical whole-body vibration; in comparison with ISO 2631-1. Journal of Mechanical Science and Technology 23: 2738~2746
Kroemer KHE. 2001. Ergonomics: How to Design for Ease and Efficien, New Jersey. Prentice Hall.
Kubo M, Terauchi F, Aoki H, and Matsuoka Y. 2001. An investigation into a synthetic vibration model for humans: : An investigation into a mechanical vibration human model constructed according to the relations between the physical, psychological and physiological reactions of humans exposed to vibration. International Journals of Industrial Ergonomics Vol 27, Issue 4 : 219 - 232.
Lady L, 2011. Analisis variasi paparan getaran Whole Body vibration (WBV) pada pengendara sepeda motor. Di dalam : Serving Humanity for a Better Life , Proceeding 11th National Conference of Indonesia Ergonomic Society 2011; Universitas Indonesia, 14-15 September 2011 , Jakarta. hlm 1-455 – 1-461.
Maeda S, Mansfield NJ, and ShibataN. 2008. Evaluation of subjective responses to whole-body vibration exposure: Effect of frequency content. International Journals of Industrial Ergonomics Vol 38, Issue 5-6 : 509 - 515.
Mani R, MilosavljevicS, Sullivan SJ. 2010. The Effect of occupational Whole- Body Vibration on standing balance: A systematic review. International Journal of Industrial Ergonomics.
Marjanen Y, Mansfield NJ. 2010. Relative contribution of translational and rotational vibration to discomfort. Industrial Health 48 : 519-529. McDowell TW., Wikerb SF., Donga RG., Welcome DE. 2007. Effects of
vibration on grip and push force-recall performance. International Journal of Industrial Ergonomics 37 : 257–266.
Myles K and Binseel MS. 2007. The Tactile Modality: A Review of Tactile Sensitivity and Human Tactile Interfaces. Human Research and Engineering Directorate, Army Research Laboratory.
Mukti BG. 2008. Analisis getaran mekanis pada proses produksi gula di PG Jatitujuh, Majalengka [skripsi]. Bogor: Fakultas Teknologi Pertanian, Institut Pertanian Bogor.
National Health and Medical Research Council. 2007. National Statement on Ethical Conduct in Human Research . Canberra – Australia.
NawaysehN, and Griffin MJ. 2010. Power absorbed during whole-body vertical vibration: Effects of sitting posture, backrest, and footrest. Jurnal of Sound and Vibration Vol 329, Issue 14 : 2928 – 2938.
Newell GS, Mansfield NJ. 2008. Evaluation of reaction time performance and subjective workload during whole-body vibration exposure while seated in upright and twisted postured with and without armnests. International Jurnal of Industrial Ergonomics 38 : 499-508.
Newell GS, Mansfield NJ. 2008. Evaluation of reaction time performance and subjective workload during whole-body vibration exposure while seated in upright and twisted postured with and without armnests. International Jurnal of Industrial Ergonomics 38 : 499-508.
NuTesla. Critical Flicker Frequency – your wellness number http://nutesla.com/science/critical-flicker-frequency/. [1 Oktober 2012]. Oborne, DJ. 1987. Ergonomics at Work 2nd Edition. Singapore. John Wiley &
Sons Ltd.
Pulat, M. 1992. Fundamentals of Industrial Ergonomics. Illinois. Waveland Press, Inc.
Radwin RG., Armstrong TJ., Chaffin DB., Langolf GD.,and Albers JW. 1990. Hand-arm frequency-weighted vibration effects on tactility. International Journals of Industrial Ergonomics Vol 6, Issue 1 : 75 -82.
Rakheja S, Mandapuram S, and Dong RG. 2008. Energy Absorption of Seated Occupants Exposed to Horizontal Vibration and Role of Back Support Condition. Industrial Health 46 : 550–566
Rammohan V, Maikala, and Yagesh N. Bhambhani. 2008. Cardiovascular responses in healthy young women during exposure to whole-body vibration. International Journal of Industrial Ergonomics. Vol 38, Issues 9- 10.
Rehn B, Lundstrom R, Nilsson L, Liljelind I. Jarvholm B. 2005. Variation in exposure to whole-body vibration for operators of forwarder vehicles aspects on measurement strategies and prevention. International journal of Industrial Ergonomic 35 : 831 -842.
Salmoni AW, Cann AP, Gillin EK, Eger TR. 2008. Case studies in whole-body vibration assessment in the transportation industry–Challenges in the field. International Journal of Industrial Ergonomics 38 : 783–791.
Sander MS, Ernest.J. 1993, Human Factors in Engineering and Design. New York. Mc Graw Hill.
Santos BL. 2008. A Laboratory Study to Quantify Biomechanical Responses to Whole Body Vibration : The Influence on Balance, Reflex Responses, Muscular Activity and Fatigue. International Journals of Industrial Ergonomics 38 : 626 – 639.
Shigley JE, Mischke CR, Budynas RG. 2004. Mechanical Engineering Design. Ed ke-7. New York : Mc Graw Hill Companies, Inc.
Smets MPH., Eger TR., Grenier SG. Whole-body vibration experienced by haulage truck operators in surface mining operations: A comparison of various analysis methods utilized in the prediction of health risks. Applied Ergonomics 41 : 763–770
Subhash R, Ario K. 2011. Evalution of Whole-Body Vibration exposure of operator of soil compactors. Di dalam : Noise and Vibration, Studies and Research Project Report. Quebec. IRSST, Communication Devision.
Suwandi A, Wahono DR, Hermawanto D. 2008. Analisis karakteristik getaran pada kereta api rel listrik dan kereta api rel diesel. Puslit KIM – LIPI. Jakarta.
Wang W, Rakheja S, and Boileau PE. 2006. The role of seat geometry and posture on the mechanical energy absorption characteristics of seated occupants under vertical vibration. International Journals of Industrial Ergonomics Vol 36, Issue 2 : 171-184.
Wu X, Rakheja S, Boileau PE. 1998. Study of human seat interface pressure distribution under vertical vibration. International Journal of Industrial Ergonomics 21 : 433-449.