• Tidak ada hasil yang ditemukan

Design And Validation Of Army Vehicle Suspension Systems In Lateral Direction.

N/A
N/A
Info
Unduh - Bebas
Protected

Academic year: 2017

Membagikan "Design And Validation Of Army Vehicle Suspension Systems In Lateral Direction."

Copied!
24
0
0

Memuat.... (Lihat teks lengkap sekarang)

Unduh sekarang ( 24 Halaman )

Teks penuh

(1)
(2)
(3)
(4)
(5)

ABSTRACT

At the present time demand for comfort during use of vehicles is very high. Most accidents

occur at this time because a failure in the suspension system and also due to the failure of

the driver to control the vehicle. In this study we design a system using MA TLAB

exceptionally known as 14 DOF Full Vehicle System, the system is constructed using

equations that have been built using the concepts of mathematical laws now existing and

build Simulink using MA TLAB software. Through previous studies, this system proved to

be used to study the vehicle's suspension system and this will make it easier to do research

on the vehicle without high cost.

(6)
(7)
(8)
(9)
(10)
(11)
(12)
(13)
(14)
(15)
(16)
(17)
(18)
(19)
(20)
(21)
(22)
(23)
(24)

Referensi

Unduh sekarang ( PDF - 24 Halaman - 6.46 MB )

Garis besar

Design And Validation Of Army Vehicle Suspension Systems In Lateral Direction.

Dokumen terkait

Design and Simulation of Quadrature Phase Detection in Electrical Capacitance Volume Tomography

Hardware-software co-simulation using MATLAB-Xilinx System Generator allows to design and observe the characteristics of hardware; on the other hand manipulate the input signal

Design and simulation of material handling system in automotive industry /.

The analysis intends to study current efficiency in parts delivery using Arena simulation software that would then be used to propose additional improvement for

PERFORMANCE AND DESIGN OF TWO INTERSECTIONS IN TRIPOLI CITY - Diponegoro University | Institutional Repository (UNDIP-IR)

Calculations in this study to evaluate the performance of signal intersections are using the rules set by IHCM 1997. The existing data consists of geometric, traffic flow, side

The elements and principles of graphic design used in desktop publishing

• Using the Setting Leading in Your Software feature as a guide, open your favorite page layout, graphics, and word processing programs and experiment with the different methods

Design and Dynamic Analysis of an Automatic Tool Changing Mechanism used in VMC

Position Analysis For position analysis using Creo Parametric 1.0 software, after completion of final assembly of tool changing mechanism select analysis definition type position in

Integrating Spatial Modelling and Interpolation of Environmental Factors in Landscape Design Analysis

Using campus landscape rehabilitation at UTMKL Pasir Gudang as an example, an empirical study was conducted to collect the microclimate data and the existing landscape composition..

View of Design and Build Vocational Choice Applications in Vocational Schools Using the SAW (Simple Additive Weighting) Method

1, Padang, Indonesia Website: ijcs.stmikindonesia.ac.id | E-mail: [email protected] Design and Build Applications for Choice of Vocational Schools Using the Simple Additive

DESIGN AND IMPLEMENTATION OF EMBEDDED SYSTEM FOR MONITORINGANDAUTOMATIC CONTROLLING A GREEN HOUSE IN A FIELD

The paper aims to create smart agriculture fields with shows field temp,Soil moisture or humidity using website-based applications software which allow us to share via IOT enabled