Effect of Phenol Formaldehyde Impregnation on The Physical and Mechanical Properties of Soft-Inner Part of Oil Palm Trunk
Bebas
2
0
0
Teks penuh
Dokumen terkait
AR TICLE IN PRESS AR TICLE IN PRESS Antifungal Activity of Palm Pyroligneous Acid on Oil Palm Trunk Treatment Figure 3 shows the fungal colonisation obtained on the surface of OPT
Water for boiler & process at POM Boiler Ash2 Mesocarp fibre Palm oil mill effluent biogas harvested 85% no recycling savings 28 m3 Empty fruit bunch FFB production continued land
The water footprint WF of the CPO processing WFproc is calculated by adding the direct water footprint of the process and its indirect water footprint as shown in the formula below:
Wood Failures of Phenolic Resin for Dry Test and Wet Test Figure 10 shows the results of apparent cohesive wood failure of the phenolic resin samples that had maximum shear strengths..
The moisture content of different layers of oil palm trunk Moisture content median of the prepared oil palm trunk OPT samples treated and untreated for both inner and outer layers is
İlk önce Tabakalanmış Kaplama Kerestenin üretilmiş daha sonraları bu üretimi PŞK ve tabakalı şerit kereste üretimi takip etmiş ve elde edilen ürünler hızla geleneksel olarak üretilen
Thus, this study is aimed to produce flexible polyurethane films from palm kernel oil-based polyester incorporated multi-walled carbon nanotubes MWNTs and to investigate their
Table LIST OF TABLES Caption Page 1.1 Proximate analysis of biomass of oil palm biomass %, dry 4 weight Bahari,2010 2.1 The classifications ofElaeis guineensisPasiecznik,2008 7 2.2
