DAFTAR PUSTAKA
AASHTO, 1993. Guide for Design of Pavement Structure, American Association of State Highway and Transportation Officials. USA: USA.
Affandi, F., 2008. Kuat Geser Lapisan Beton Aspal dan Pada Pelat Baja untuk Jembatan. Jurnal Jalan-Jembatan, 25(1), pp.12-36.
Alexander, W.S., 1996. Geogrid reinforcement of asphalt overlays on australian airport pavements. London: E&FN Spon.
Andri, K.S., 2013. Kajian Lendutan Sistem Pelat Terpaku pada Tanah Pasir dengan Menggunakan Metode Beam on Elastic Foundation (BoEF) dan Metode Elemen Hingga, Tesis. Yogyakarta: Prodi S2 Teknik Sipil dan Lingkungan, UGM.
ASTM-C109, 2007. Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 50 mm Cube Specimen). US, US: ASTM International.
ASTM-C230, 2008. Standard Specification for Flow Table for Use in Tests of Hydraulic Cement. US, USA: ASTM International.
Austroads, 1987. Guide to The Visual Assesment of Pavement Condition. Sydney: Austroads Publication.
Ballarini, R., 2012. Mechanistic Modeling of Unbonded Concrete Overlay Pavements, Research Project, Final Report 2012-02. USA: Minnesota Department of Transportation.
Bina-Marga, 2012. Manual Desain Perkerasan Jalan (Draft) No.22.2 /KPTS/Db/2012, Struktur Perkerasan Baru (Bagian I). Jakarta: Kementerian Pekerjaan Umum.
Bordelon, A.C., 2005. Fracture Behaviour of Concrete Materials For Rigid Pavement System. Urbana, Illinois: Thesis. University of Illinois at Urban-Campaign.
Braham, A., 2006. The Investigation of Asphalt Interlayer between Existing Portland Cement Concrete Pavements and Portland Cement Concrete Overlays. CEE 506 Pavement Design and Analysis II Term Project.
Buttlar, B., 2000. Reflective Crack Relief Interlayers. Cracking in Pavements Symposium. Laramie, WY, 2000. University of Illinois at Urbana-Champaign.
Cho, S.-H., Im, J.-H. & Hwang, S.-D., 2014. Evaluation of Effect of Asphalt and Geotextile Interlayer on Unbonded Concrete Overlay. International Journal of Highway Engineering, 16(2), pp.91-98.
Cojocaru, R., 2011. The Design of The Airport Rigid Pavement Structure. Buletinul Institutului Politechnic Din Iasi, VII(2).
Columbier, G., 1997. Cracking in pavements, nature and origin of reflective cracking in pavements. In A.Vanelstraete & L. Francken, eds. Prevention of Reflective Cracking in Pavements. Brussels.: RILEM Conference Report 18. pp.1-15. De Bondt, A.H., 1998. Anti Reflective Cracking Design of (Reinforced) Asphaltic
Dehn, F., Holschemacher, K. & Weibe, D., 2000. Self Compacting Concrete Time Development of Material Properties and The Bond Behaviour. LACER, 5. Delatte, N., 2008. Concrete Pavement Design, Construction, and Performance.
London and New York: Taylor & Francis.
FAA, 1995. Airport Pavement Design and Evaluation. United States of America: Advisory Circular AC-150/5320-6E.
FHWA, 2002. Unbonded Portland SEment Concrete Overlays. US: Department of Transportatioan Federal Higway Administration.
Firdaus, 2013. Perilaku Elemen Beton Sandwich Terhadap Pengujian Geser Murni. Konferensi Nasional Teknik Sipil 7 (KoNTekS 7), Universitas Sebelas Maret (UNS), 2013. Surakarta.
Fwa, T.F. & Wei, L., 2003. Highway and Airport Pavement Design, Hand Book of Highway Engineering. 2nd ed. London, UK: Taylor and Francis Group. Gere, J.M. & Timoshenko, S.P., 2000. Mekanika Bahan. 1st ed. Ciracas Jakarta:
Erlangga.
Guo, E.H., 2010. Concrete Pavement Strength and Beam Flexural Strength. 2010 FAA Worldwide Airport Technology Transfer Conference, Atlantic City, New Jersey, USA, 2010. SRA International.
Gustiarini, A., 2011. Overlay bandara ganggu jadwal penerbangan. di akses tanggal 1 maret 2016: Lampung.tribunnews.com.
Hall, K.D. & Banihatti, N., 2008. Structural Design of Portland Cement Concrete Overlays for Pavements. Mack-Blackwell Rural Transportation Center: Dept. of Civil Engineering, University of Arkansas.
Hardiyatmo, H.C., 2011. Perancangan Perkerasan Jalan dan Penyelidikan Tanah. Yogyakarta: Gadjah Mada University Press.
Harrington, D., 2008. Guide to Concrete Overlays, Second edition. Iowa State University: National Concrete Pavement Technology Center.
Hernandez-Olivares, F. et al., 2006. Fatique behaviour of Recycled Tyre Rubber-Filled Concrete and its Implications in The Design of Rigid Pavements. Construction and Building Materials Journal, XXI, pp.1918-27.
Hjelmstad, K.D., Kim, J. & Zuo, Q.H., 1997. Finite Elemen Procedures for Three Dimensional Pavement Analysis. Seattle, Washington, 1997. ASCE.
Huang, Y.H., 2004. Pavement analysis and Design. 2nd ed. USA: Pearson Prentice Hall, Upper Saddle River.
ICAO, 1983. Aerodrome Design Manual , Part 3-Pavements. 2nd ed. USA: International Civil Aviation Organization.
Inna, K., Kabul, B.S. & Suryo-Hapsoro, T.U., 2003. Aplikasi Teknologi Geosintetik untuk Perkerasan Lentur. Jurnal Teknosains, Vol. 16(B).
Institute-MS17, A., n.d. Asphalt Overlay for Highway and Street Rehabilitation. USA: Asphalt Institute (Manual Series no.17).
Jongeun, B., 2010. Modeling Reflective Cracking Development in Hot-Mix Asphalt Overlays and Quantification of Control Techniques, Dissertation. Urbana-Campaign: University of Illinois.
Kardiyono, 2007. Teknologi Beton. 1st ed. Yogyakarta: Biro Penerbit KMTS FT UGM.
Khodaii, A. & Fallah, S., 2009. Effect of Geosynthetic Reinforcement on the Propagation of Reflection Cracking in Asphalt Overlays. International Journal of Civil Engineering, 7, No.2.
Kim, K.W., Doh, Y.S. & Lim, S., 1999. Mode I Reflection Cracking Resistance of Strengthened Asphalt Concretes. Journal of Construction and Building Materials, XIII, pp.243–51.
Kim, J., K.D.Hjelmstad & Q.H.Zuo, 1997. Three Dimensional Finite Element Study of Wheel Load Interaction. Seattle, Washington., 1997. ASCE.
Kimpraswil., 2003. Perencanaan Perkerasan Jalan Beton Semen (Pd T-14-2003). Jakarta: Departemen Permukiman dan Prasarana Wilayah.
Kimpraswil, 2004. Pelaksanaan Perkerasan Jalan Beton Semen (Pd T-05-2004). Jakarta: Departemen Permukiman dan Prasarana Wilayah.
Kosasih, 2003. Analisis Disain Struktur Perkerasan Kaku Landasan Pesawat Udara dengan Menggunakan Program Aierfield. Jurnal Infrastruktur dan Lingkungan Binaan, III(Juni).
Liao, M. & Ballarini, R., 2012. Toward a Fracture Mechanics-Based Design Approach for Unbonded Concrete Overlay Pavements. Journal of Engineering Mechanics, (138), pp.1195-204.
Lugmayr, R., Jamek, M. & Tschegg, E.K., 2009. Fatigue crack propagation in bituminous roads with geosynthetic interlayer. Baltic, 2009. XXVII International Baltic Road Conference.
Mack, J.W. et al., 2006. Unbonded Concrete Overlayy Research for Airfields at The FAA National Airport Pavement Test Facility. USA, 2006. ASCE.
Mamlouk, M.S., 2006. Design of Flexible Pavement. Arizona State Univeristy, US. Mariani, Sampebulu, V. & Ahmad, A.G., 2014. Pengaruh Penambahan Admixture
Terhadap Karakteristik SCC. Jurnal SAMRTek, III(3).
Maytasari, A., 2014. Pengaruh Penggunaan Fly Ash dan Viscocrete pada Self-compacting Concrete (SCC). Diakses tanggal 23 Juni 2016: http://www.slideshare.net/indahsamad/self-compacting-concrete
35623987?from_action=save.
Morse, A.A. & Green, R.L., 2003. Pavement Design and Rehabilitation: Rigid Pavement. In R.L. Brockenbrough & K.J. Boedecker, eds. Highways Engineering Handbook, 2nd edition. USA: McGraw-Hill.
Mukhtar, M.T. & Dempsey, B.J., 1997. Interlayer Stress Absorbing Composite (ISAC) for Mitigating Reflection Cracking In Asphalt Concrete Overlays, Final Report. Illinois, 1997. Cooperative Highway and Transportation Series No.260 Department of Civil Engineering.
Nehdi, M. & Khan, A., 2001. Cementitious Composites Containing Recycled Tire Rubber. An Overview of Engineering Properties and Potential Applications. Cement, Concrete, and Aggregates Journal, XXIII(1), pp.3–10.
Ngii, E., Satyarno, I., Suparma, L.B. & Siswosukarto, S., 2015. Rancangan Laboratorium Beton Karet (Rubcret) Sebagai Bahan Interlayer. Prosiding Seminar Nasional Teknik Sipil V. Surakarta, 2015. UMS, 19 Mei 2015. Ngii, E. & Suparma, L.B., 2004. Pengaruh Penambahan Aspal pada Karakteristik
Campuran Beton Aspal Akibat Proses Penuaan Aspal dalam Campuran. Jurnal Terakreditasi TEKNOSAINS., Jilid 17(No.4).
Ogundipe, O.M., 2011. Mechanical behaviour of Stress absorbing membrane Interlayers, Thesis Submitted to the University of Nottingham for the Degree of Doctor of Philosophy. Nottingham: Nottingham University.
Paris, P.C. & Erdogan, F., 1963. A Critical Analysis of Crack Propagation Law. in Transactions of ASME. Journal of Basic Engineering, No. 3(Series D), p.85. PBI, 1971. Peraturan Beton Bertulang Indonesia. Bandung: Lembaga Penyelidikan
Masalah Bangunan.
Qin, X. & Zhu, S., 2011. Study of function layer Based on Unbonded PCC Overlays on Old Cement Concrete Pavement. IEEE Journal, pp.3493-96.
Roeslar, J.R., Hiller, J.E. & Littleton, P.C., 2005. Large Scale Airfield Concrete Slab Fatique Test. 9th International Conference on Concrete Pavement, pp 1247-1268 August 13-18, 2005, 2005. Colorado Springs.
Rolling, R.S., 1988. Design of Overlays for Rigid Airport Pavements, DOT/FAA/PM-87/19. Virginia: FAA Final Report.
Satyarno, 2006. Penggunaan Serutan Karet Ban Bekas Untuk Campuran Beton. Jurnal Media Teknik, XXVIII(4), pp.45-51.
Snyder, M.B., 2015. A Guide to Concrete Overlays: PCC Overlay Design. Indianapolis, Indiana Concrete Pavement Workshop, 2015. 2015 Indiana. Sobhan, K., Genduso, M. & Tandon, V., 2005. Effects of Geosynthetic
Reinforcement on the Propagation of Reflection Cracking and Accumulation of Permanent Deformation in Asphalt Overlays. Cartegena, Columbia, 8-10 June 2005, 2005. Third LACCET International Latin American and Carribean Conference for Engineering and Technology.
Soderqvist, J. & Silfwerbrand, J., 2005. Flexural Fatique of Plain Concrete Beams. International Journal of Pavement Engineering.
Sugiharto & Handoko, 2006. Penelitian Mengenai Peningkatan Kekuatan Awal Beton SCC. Jurnal Dimensi Teknik, Vol.3, UK Petra.
Suhendro, B., 2000. Teori Model Struktur dan TEknik Eksperimental. Yogyakarta: Beta Offset.
Suparma, L.B., 2005. Laboratory Design and Performance of Stress Absorbing Membrane Interlayer (SAMI) Incorporating Waste Recycled Plastic. Jurnal Media Teknik, No. 2 Tahun XXVII Edisi Mei.
Swaddiwudhipong, S., Lu, H.-R. & Wee, T.-H., 2003. Direct tension test and tensile strain capacity of concrete at early age. Cement and Concrete Research, 33, pp.2077–84.
Torres, H.N., Roeslar, J., Rasmussen, R.O. & Harrington, D., 2012. Guide to the Design of Concrete Overlay Using Existing Methodologies. Iowa State University, 2012. National Concrete Pavement Technology Center.
Vanelstraete and Francken, L., 1996. Laboratory Testing and Numerical Modelling of Overlay System on Cement Concrete Slab. Maastricht: Proceedings of The 3rd RILEM-Conference on Reflective Cracking in Pavements. pp.211-20. Vanelstraete & Bondt, A.H., 1997. Crack Prevention and Use of Overlay Systems.
Brussels: RILEM Conference in Prevention of Reflecttive Cracking in Pavements. pp.pp. 42-60.
Vanelstraete, Bondt, A.H. & Courard, L., 1997. Characterization of overlay system. In A. Vanelstraete & L. Francken, eds. Prevention of Reflecttive Cracking in Pavements Report. Brussels: RILEM Conference. pp.61-62.
Vivi, 2004. Kinerja Campuran Beton Aspal dengan Ban Bekas sebagai Pengganti Sebagian Agregat terhadap Flexural Fatique Test, Tesis. Bandung: Program Magister Teknik Sipil, ITB.
Von Quintus, H.L., J., M. & S, S., 2010. Techniques for Mitigation of Reflective Cracks. Atlantic City, New Jersey, USA, 2010. The 2010 FAA Worldwide Airport Technology Transfer Conference.
Westergaard, H.M., 1926. Stress in Concrete Pavements Computed by Theoretical Analysis. Public Roads, 7, pp.225-35.
Widodo, S., 2003. Optimalisasi Kuat Tekan Self-Compacting Concrete dengan Cara Trial-Mix Komposisi Agregat Dan Fillerpada Campuran Adukan Beton.
Diakses tanggal 23 Juni 2016.
http://staff.uny.ac.id/sites/default//files/penelitian/dr-slamet-widodo-st-mt/komposisi campuransccemail.pdf.
Woodside, A.R. & Clements, H.M., 1996. Development of a pavement model to optimize the properties of stress-absorbing membrane interlayers., 1996. Eurasphalt and Eurobitume Congress.
Yamin, R.A. & Aschuri, I., 2009. Stress Absorbed Membrane Interlayer (SAMI) Untuk Menghambat Retak Refleksi. Surabaya, 2009. Universitas Kristen Petra, Simposium XII FSTPT.
Yoder, E.J. & Witczak, M.W., 1975. Principal of Pavement Design. 2nd ed. New York: John Wiley and Sons, Inc.
Yoon, H.C., Liu, C., Dossey, T. & McCullough, B.F., 1998. Asphalt Overlay Design Methodes for Rigid Pavements Considering Rutting, Refklection Cracking, and Fatique Cracking. Bureau of Engineering Rusia: Research Report 987-9 Centre for Transportation Research.
Yusuf & Vivi, 2010. Studi Tentang Peentuan Persyaratan Minimum untuk Konstruksi Jalan Beton (Rigid Pavement) di atas Tanah Lunak dengan Cara Percobaan Pembebanan Langsung di Lapangan. Jurnal Teknik Sipil Untan, Vol 10(Nomor 2).
Zamora-Barraza, D., Calzada-Perez, M., Castro-Fresno, D. & Vega-Zamanillo, A., 2010. New procedure for measuring adherence between a geosynthetic material and a bituminous mixture. Journal of Geotextiles and Geomembranes, 28, pp.483–489.
Zamora-Barraza, D., Calzada-Perez, M., Castro-Fresno, D. & Vega-Zamanillo, A., 2011. Evaluation of anti-reflective cracking system using geosynthetic in the interlayer zone. Journal of Geotextiles and Geomembranes, 29, pp.130–36. Zhang, J. & Li, V., 2002. Monotonic and Fatique Performance in Bending if
Fiber-reinforced Engineered Cementitious Composite in Overlay System. Cement and Concrete Research, 32, pp.415-23.
Zhao, F., Yu, T. & Cheng, J., 2010. The Optimum Thickness Confirmation of Asphalt Mixture Stress-absorbing Material Interlayer. IEEE Journal.
