T-Max
®
P, ISO S geometries
A complete series of new geometries for productive turning of HRSA and titanium alloys with low tool pressure and chip control in focus.
See General turning chapter
Grade GC1115
A strong PVD grade with a good balance of wear resistance and toughness. It offers true versatility for heat resistant super alloys (HRSA) and stainless steel materials with the highest production security. See General turning chapter
Advanced materials
A largely expanded area with new grades – CB7035, CB7525, CB7925, CC6190 – and a number of new tools and inserts to take advanced cutting materials into new areas.
See General turning chapter, page A65
Highlights
Grade GC1145
New parting and grooving grade dedicated to toughness-demanding operations. Resists chipping and runs for a longer time in cut.
See Parting and Grooving chapter
CoroCut
®
M and R size
Larger CoroCut inserts and holders for wider grooves up to .590 inch (15 mm), giving improved performance and metal removal in heavy duty grooving.
New insert geometries complement the current assortment.
CoroCut
®
3
RS geometry: full radii inserts for grooving and profiling CS geometry: available in more front angles for pip- and burr free parting off
GC geometry: flat top, flat bottom grooving geometry.
See Parting and Grooving chapter
QS holding system with high
pressure coolant (HP)
Combining the quick change capability of the QS holding system with high pressure coolant – a first for sliding head machines. QS HP provides problem-free production and improved component quality in the most demanding, long-chipping materials.
Highlights
CoroTurn SL70 with high
pressure coolant
Standard blades and adapters provide added reach for profiling and pocketing.
See CoroTurn SL chapter
CoroThread
®
266
GC1135 is a new threading grade for CoroThread® 266. It is universal to fit mixed production in all materials, optimized for on stainless steels and heat resistant super alloys.
See Threading chapter
Coromant Capto Disc Interface
CDI, the quick-change tooling interface for turning centers, is now available as standard.
See Tooling System chapter
Highlights
Turning tools
A GENERAL TURNING
B PARTING AND GROOVING
C THREADING
G TOOLING SYSTEMS (For non-rotating tools)
H MULTI-TASK MACHINING
I
CoroTurn
®
SL (New chapter, see below)
J GENERAL INFORMATION
Rotating tools
D MILLING
E DRILLING
F BORING
G TOOLING SYSTEMS (For rotating tools)
J GENERAL INFORMATION
New chapter in the Turning tools catalog
All CoroTurn® SL products, including cutting heads for General Turning, Parting and Grooving and Threading are now presented in the same chapter as CoroTurn® SL adapters.
What’s new?
GENERAL TURNING
A
Inserts
A3
External machining
A89
Internal machining
A235
Cartridges for special tools
A329
PARTING AND GROOVING
B
THREADING
C
TOOLING SYSTEMS
G
MULTI-TASK MACHINING
H
CoroTurn
®
SL
I
