CFD Simulation of Heat Transfer in Fluidized Bed Reactor.
Bebas
14
0
0
Teks penuh
Dokumen terkait
The correlation of air flowrate with CO and CO2 content CONCLUSION AND SUGGESTION Gasification of the Indonesian low-rank coal using fluidized bed bubbling reactor at low operating
Biodiesel fuels from palm oil via the non-catalytic transesterification in a 0.000 0.050 0.100 0.150 0.200 0.250 0.300 0.350 0.400 0.450 Residence time s FIGURE 4 Residence time of
By using the values of the above mentioned parameters, the programme was run and the effects of the parameters on reaction kinetics were observed which are discussed by different plots
132 NOMENCLATURE a packing area per unit volume, m2/m3 A surface area for heat transfer, m2 AC area of cross section for packed bed, m2 CP specific heat, J kgK D diameter of the
The CFD results have been Temperature comparison between single particle and particles in curtain in 10 mm slot at three 0.041, 0.1 and 0.2 kg/s mass flow rates and particle size of
Chemical vapor deposition of iron thin films at moderate temperatures using [(arene)(diene)Fe(0)] precursors was investigated, with characterization of precursor vapor pressure and decomposition
This document presents a study on hydrogen gas production through the gasification of oil palm empty fruit bunch (EFB) in a fluidized bed
Vapor Stems, Initial Macrolayer and Bubble Departure Period It’s important to determine the values of initial thickness of macro-layer, initial void fraction and bubble departure
