• Tidak ada hasil yang ditemukan

Th Lession Mechanical Properties of Mate

N/A
N/A
Info
Unduh - Bebas
Protected

Academic year: 2018

Membagikan "Th Lession Mechanical Properties of Mate"

Copied!
9
0
0

Memuat.... (Lihat teks lengkap sekarang)

Unduh sekarang ( 9 Halaman )

Teks penuh

(1)
(2)

Objectives

On completion of this section, students will be able to:

• understand the classification of engineering materials based on mechanical properties.

• gain skill on mechanical properties of metals

(3)

Stress Strain Curve

(4)

Unit stress

(5)

•

Strain =

ngth

Originalle

(6)

Direct Strain

(7)

Shear Strain

• Shear strain is the ratio of deformation to original dimensions. In the case of shear strain, it is the amount of deformation perpendicular to a given line rather than parallel to it.

• In engineering, shear strain is defined as the

tangent of the angle, and is equal to the length of deformation at its maximum divided by the

perpendicular length in the plane of force

(8)
(9)

Referensi

Unduh sekarang ( - 9 Halaman - 186.50 KB )

Garis besar

Th Lession Mechanical Properties of Mate

Dokumen terkait

Mechanical properties of atomically thin boron nitride and the role of interlayer interactions

However, the small portions of graphene and BN nanosheets close to the indentation centre were under a large in-plane tensile strain and out-of-plane compression, and there has been no

Effect of HPT processing followed by long term natural ageing on mechanical and electrical properties of commercially pure Cu

Effect of HPT processing followed by natural ageing on hardness of commercially pure Cu: Variation of Vickers microhardness as function of the strain imposed during HPT a and inverse

Effects of reverse cold rolling on the microstructure, texture and mechanical properties of AA1100 aluminium alloys

This difference in plastic strain gradients leads to a reduced dislocation density in the RCR sample when compared to a conventional rolled sample [24] Texture Analysis by X-ray

Co-ordination of Vapour and Liquid Phase Water Transport Properties in Plants

Therefore, an ‘apparent’ soil- to-leaf hydraulic conductance Gt, a measure of whole- plant water transport efficiency based on the liquid water flux per unit driving force in situ,

Study of Mechanical and Thermal Properties for Epoxy Grouts Subjected to Seawater Conditioning at Elevated Temperature: Tensile Test and Compressive Test

Based on the respective stress-strain curves, the ductility, young modulus and ultimate tensile strength of epoxy grout A are lower than epoxy grout B because epoxy grout A is affected