123
DAFTAR PUSTAKA
ABTCP. 2007. The Eucalyptus Fibers and The Kraft Pulp Quality Requirements For Paper Manufacturing.Celso Foelkel. Brazil.
Aguayo MG, Mendonça RT, Martínez P, Rodríguez J, Pereira M. 2012. Chemical characteristics and kraft pulping of tension wood from Eucalyptus globulus
labill. Revista Árvore, Viçosa-MG 36: 1163-1171.
Andrade MCN, Minhoni MTA, Sansigolo CA, Zied DC. 2010. Analise Quiemica da Madeira e Casca de Diferente Tipos de Eucalipto Antes e Durante o Cult ivo de Shiitake em Torasi. Revista Árvore, Viçosa-MG 34:165 – 167.
Anggraeny T. 2013. Pengaruh Konsentrasi Alkali Aktif Terhadap Rendemen dan Sifat Fisik Pulp Sulfat pada Kayu Teras dan Gubal Eucalyptus pellita.
(Skripsi). Fakultas Kehutanan Universitas Gadjah Mada. Yogyakarta.
ASTM. 2002. Annual Book of ASTM Standards. Section 4. Construction. ASTM International. USA.
Back EL. 2000. Deresination in Pulping and Washing. Back (ed.) Pitch Control, Wood Resin and Deresination. Tappi Press. United States of America: 205-230.
Benson L. 1957. Plant Classification. D.C. Heath and Company. Boston.
Biermann CJ. 1996. Handbook of Pulping and Papermaking. 2nd ed. Academic Press. California.
Brown HP, Panshin AJ, Forsaith CC. 1952. Textbook of Wood Technology II. McGraw-Hill Book. Co. New York.
Browning BL. 1967. Methods of Wood Chemistry II. Wisconsin Interscience. New York.
Bowyer JL, Haygreen JG, Schmulsky R. 2003. Forest product and Wood Science
: An Introduction 4th. Ed. Iowa State Press. USA.
Casey JP. 1966. Pulp and Paper Chemistry and Chemical Technology I.
Interscience Publishers. New York.
Chandio IA, Matori AN, Lawal DU, Sabri S. 2011. GIS-based land suitability analysis using AHP for public parks planning in Larkana city. Canadian Centre of Science and Education 5: 177-189.
124
Copur Y, Makkonen H, Amidon TE. 2005. The prediction of pulp yield using selected fiber properties. Holzforschung 59: 477-480.
Daniel G. 2009. Wood and Fibre Morphology. Ek M, Gellerstedt G, Henriksson G (ed). Pulp and Paper Chemistry and Technology Volume 1. Walter de Gruyter GmbH & Co. Berlin: 45-70.
Demuner VD, Silva C, Manfredi. 1991. The Influence of Eucalypt Fiber Characteristic on Papper Properties. TAPPI Procedings. International Paper Physics Conference.
Dewi LM, Supartini. 2011. Anatomical properties of Shorea mujongensis P.S. Ashton, a critical endangered species of Dipterocarps from Kalimantan.
Journal of Forestry Research 8: 91-100.
Direktorat Jenderal Kehutanan. 1976. Vademecum Kehutanan Indonesia.
Direktorat Jenderal Kehutanan. Departemen Pertanian. Jakarta.
Dombro DB. 2010. Eucalyptus pellita : Amazonia Reforestation’s Red Mahagony. Planeta Verde Reforestatiton. U.S.
Downess GM, Hudson IL, Raymond CA, Dean GH, Michell AJ, Schimleck LR, Evans R, Muneri A. 1997. Sampling Plantation Eucalypts for Wood and Fibre Properties. CSIRO. Australia.
Dutt D, Tyagi CH. 2011. Comparison of various Eucalyptus species for their morphology, chemical, pulp, and paper making characteristics. Indian Journal of Chemical Technology 18: 145-151.
Espinosa LY, Terrazas T, Mata LL, Hernandez JIV. 2004. Wood variation in Laguncularia racemosa and its effect on fibre quality. Wood Science Technology 38: 217-226.
Evtuguin DV, Neto CP. 2007. Recent Advances in Eucalyptus Wood Chemistry: Structural Features through the Prism of Technological Response. Research Report Department of Chemistry, University of Aveiro. Portugal.
FAO. 1979. Eucalypts For Planting. Via delle Terme. Italy.
Fengel D, Wegener G. 1995. Kayu : Kimia, Ultrastruktur, Reaksi – Reaksi (Terjemahan). Gadjah Mada University Press. Yogyakarta.
Gardner JAF, Hillis WE. 1962. The Influence of Extractives on the Pulping of Wood. Hillis (ed). Academic Press. New York: 367-403.
125
Gofas A, Tsoumis G. 1975. A Methode for measuring cellular characteristic of wood. Wood Science and Technology 9: 145-152.
Harwood CE, Alloysius D, Pomroy P, Robson KW, Haines MW. 1997. Early growth and survival of E. pellita provenances in a range of tropical environment, compared with E. Grandis, E. Urophylla and A. mangium.
New Forests 14: 203-219.
Haroen WK, Dimyati F. 2006. Property of tension wood, heartwood and sapwood Acaia mangium to pulp characteristic. Berita Selulosa 41: 1-7.
Henriksson G, Lennholm H. 2009. Cellulose and Carbohydrate Chemistry. Ek M, Gellerstedt G, Henriksson G (ed). Pulp and Paper Chemistry and Technology Volume 1. Walter de Gruyter GmbH & Co. Berlin: 71-100. Horn RA. 1978. Morphology of Pulp Fiber from Hardwoods and Influence on
Paper Strength. Research Paper Forest Products Laboratory. United States Department of Agriculture. Wisconsin.
Igarza UO, Machado EC, Diaz NP, Martin RG. 2006. Chemical composition of bark of three species of eucalyptus to three heights of commercial bole : part 2 Eucalyptus pellita F. Muell. Revista Forestal Venezolana 50 : 53 – 58. Irianto RSB, Barry K, Hidayati N, Ito S, Fiani A, Rimbawanto A, Mohammed C.
2005. Incidence and spatial analysis of root rot of Acacia mangium in Indonesia. Journal of Tropical Forest Science 18: 157-165.
ITTO. 2006. Guide on Utilization of Eucalyptus and Acacia Plantations in China for Solid Wood Products. Technical Report. ITTO Project PD 69/01 Rev.2 (I). Research Institute of Wood Industry Chies Academy of Forestry. China. Jansson MB. 2000. Influence on Pulp and Paper Odor. Back EL (ed.) Pitch
Control, Wood Resin and Deresination. Tappi Press. USA: 354-355.
Jansson MB, Nilvebrant NO. 2009. Wood Extractives. Ek M, Gellerstedt G, Henriksson G (ed). Pulp and Paper Chemistry and Technology Volume 1. Walter de Gruyter GmbH & Co. Berlin:147-172.
Jiayu B. 2003. Genetic Improvement of Tropical Eucalypts in China. Turnbull (ed). Eucalypts in Asia. ACIAR Proceedings No.111. Canberra: 64-70. Kasmudjo, 1998. Cara Penentuan Proporsi Tipe Sel dan Dimensi Sel Kayu.
Bagian Penerbitan Yayasan Pembina Fakultas Kehutanan. Universitas Gadjah Mada. Yogyakarta.
126
Kementerian Perindustrian. 2013. Pengembangan Industri Pulp dan Kertas. http:// kemenperin.go.id/artikel/7807/Pengembangan-Industri-Pulp-dan-Kertas. ______________________. 2014. Kapasitas Produksi Kertas dan Pulp Naik di
2017. http://agro.kemenperin.go.id/1949-Kapasitas-Produksi-Kertas-dan-Pulp-Naik-di-2017.
Kha LD, Thinh HH, Cuong NV. 2003. Improvement of Eucalypts for Reforestation in Vietnam. Turnbull (ed). Eucalypts in Asia. ACIAR Proceedings No.111. Canberra:71-81.
Kiaei M. 2012. The influence of cambial age on fiber dimension in Maple wood.
Middle-East Journal Science Research 11: 1009-1012.
Kien ND, Quang TH, Jansson G, Harwood C, Clapham D, Arnold S. 2009. Cellulose content as a selection trait in breeding for kraft pulp yield in
Eucalyptus urophylla. Annals Forest Science 66: 1-8.
Krisnawati H, Kallio M, Kanninen M. 2011. Acacia mangium Willd.: Ecology, Silviculture and Productivity. CIFOR. Bogor.
Lal P. 2003. Clonal Eucalyptus Plantations in India. Turnbull (ed). Eucalypts in Asia. ACIAR Proceedings No.111. Canberra: 16-21.
Leksono B. 2000. Eksplorasi jenis-jenis benih Acacia dan Eucalyptus pellita
F.Muell di Merauke-Irian Jaya. Beccariana 2: 48-50.
Leksono B, Kurinobu S, Ide Y. 2007. Optimum design for seedling seed orchard to maximize genetic gain an investigation of seedling seed orchards of
Eucalytus pellita. Bull. Tokyo Univ.For.118: 15-24.
____________. 2008. Realized genetic gains observed in second generation seedling seed orchards of E. pellita in Indonesia. Journal Forest Research
13: 110-116.
Leksono B, Setyaji T. 2004. Variasi Pertumbuhan Tinggi dan diameter pada uji keturunan Eucalypyus pellita system Populasi Tunggal. Jurnal Penelitian Hutan Tanaman 1: 67-78.
Luangviriyasaeng V. 2003. Eucalypt Plantation in India. Turnbull (ed). Eucalypts in Asia. ACIAR Proceedings No.111. Canberra. 28-31.
Lukmandaru G, Marsoem SM, Siagian RM. 2002. Kualitas kayu Nilotika (Acacia nilotica) Sebagai Bahan Baku Pulp. Prosiding Seminar Nasional MAPEKI V: 397-402.
127
Marsoem SN, Sulistyo J, Prasetyo VE, Andhini Y, Setiawan F. 2012. Maintaining environtmental Quality: Fiber Characterization as a Tool for Verifying Pulp Fiber Composition.Paper Conference: 1946-1955.
Mendoza GA, Macoun P, Prabhu R, Sukardi D, Purnomo H, Hartanto H. 1999.
Panduan Untuk Menerapkan Analisis Multikriteria dalam Menilai Kriteria dan Indikator. CIFOR. Indonesia.
Mendoza GA, Martins H. 2006. Multi-criteria decision analysis in natural resource management: A critical review of methods and new modelling paradigms. Forest Ecology and Management: 1-22.
Moorthy KS, Kishore H, Chand S. 1985. Pulping and Papermaking Characteristics of Fast Growing Species. Research Report 12: 1-23.
Morck R, Jansson MB, Dahlman O. 2000. Resinous Compounds in Effluents form Pulp Mills. Back EL (ed.) Pitch Control, Wood Resin and Deresination. Tappi Press. USA.
Morris W. Guide for Planning Pulp and Paper Enterprises. FAO forestry and Forest Products Studies. New York.
National Academy Of Science. 1983. Firewood Crops: Shrub and Tree Species For Energy Production. Volume 2. National Academy Press. Washington, D.C.USA.
Nilvebrant N. 2000. Color and Brighteness Reversion Due to Extractives. Back EL (ed.) Pitch Control, Wood Resin and Deresination. Tappi Press. USA. :353.
Nugroho WD, Marsoem SN, Yosue K, Fujiwara T, Nakajima T, Hayakawa M, Nakaba S, Yamagishi Y, Jin H, Kubo T, Funada R. 2012. Radial variations in the anatomical characteristics and density of the wood of Acacia mangium of five different provenances in Indonesia. Journal Wood Science
58: 185-194.
Oliveira AC, Carneiro ACO, Vital BR, Almeide W, Pereira BLC, Cardoso MT. 2010. Quality parameters of Eucalyptus pellita F. Muell. wood and charcoal. Science Forest Piracicaba 38: 431 – 439.
Ona, T, Sonoda T, Ito K, Shibata M, Tamai Y, Kojima Y, Oshima J, Yokota S, Yoshizawa N. 2001. Investigation of relationship between cell and pulp properties in Eucalyptus by examination of within-tree property variations. Journal of Wood Science and Technology 35: 229-243.
128
Oshima J, Yokota S, Yoshizawa N, Ona T. 2005. Examination of within-tree variations and the heights representing whole-tree values of derived wood properties for quasi-non-destructive breeding of Eucalyptus camaldulensis
and Eucalyptus globulus as quality pulpwood. Journal Wood Science
51:102–111.
Panshin AJ, de Zeeuw C. 1980. Textbook of Wood Technology. Vol.I. Structure, Identification, properties and Uses of The Commercial Woods of The United State and Canada. Mc Graw-Hill Book Company. New York.
Pettersen RC. 1984. The Chemical Composition of Wood. in Rowell R. The Chemistry of Solid Wood. Americam Chemical Society. Washington D.C.: 57-126.
Poubel DS, Garcia RA, Latorraca JVF, Carvalho AM. 2011. Anatomical structure and physical properties of Eucalyptus pellita F.Muell. Floresta e Ambiente
18: 117-126.
Praptoyo H. 2002. Studi Perbandingan Metode Sampling Bor Riap Dengan Disk Untuk Pengukuran Proporsi dan Dimensi Serat Kayu Sengon (Paraserianthes falcataria) Solomon. Laporan Penelitian. Fakultas Kehutanan. Universitas Gadjah Mada. Yogyakarta.
Prawirohatmodjo, S. 2004. Kimia Kayu. Fakultas Kehutanan UGM. Yogyakarta. Raymond CA, Muneri A. 2001. Nondestructive sampling of Eucalyptus globulus
and E.nitens for wood properties. Wood Science and technology 35: 27-39. Raymond CA, Poke FS. 2006. Predicting extractives, lignin, and cellulose
contents using near infrared spectroscopy on solid wood in Eucalyptus globulus. Journal of Wood Chemistry and Technology 26: 187–199.
Sadegh AN, Rakhshani H, Samariha A, Nemati M, Khosravi E. 2011. The influence of axial position on fiber features of Cotton stems. Middle-East Journal of Scientific Research 10: 447-449.
Saka S. 2001. Chemical Composition and Distribution. Hon DNS, Shirashi N(ed). Wood and Cellulosic Chemistry 2nd edition. Marcel Dekker Inc. New York: 51-82.
Santana WMS, Calegario N, Marina DCA, Trugilho PF. 2012. Effect of age and diameter class on the properties of wood from clonal Eucalyptus. Cerne, Lavras 18: 1-8.
Sharma AK, Dutt D, Upadhyaya JS, Roy TK. 2011. Anatomical, morphological, and chemical characterization of Bambusa tulda, Dendrocalamus
129
hamiltonii, Bambusa balcooa, Malocana baccifera, Bambusa arundinacea,
and Eucalyptus tereticornis.Bioresourcess 6: 5062-5073.
Sharma M, Sharma CL, Kumar YB. 2013. Evaluation of fiber characteristics in some weeds of Arunachal Pradesh, India for pulp and paper making.
Research Journal of Agriculture and Forestry Science 1: 15-21.
Shmulsky R, Jones PD. 2011. Forest Products and Wood Science. An Introduction. A John Wiley &Sonsc. Inggris.
Sjostrom. 1995. Kimia Kayu : Dasar – Dasar Penggunaan (Terjemahan). Gadjah Mada University Press. Yogyakarta.
Soeseno OH. 1985. Pemuliaan Pohon. Yayasan Pembina Fakultas Kehutanan. Universitas Gadjah Mada. Yogyakarta.
Spiegel MR, Stephens LJ. Statistik Edisi ketiga. Erlangga. Jakarta.
Standar Nasional Indonesia. 1989. SNI 14- 0494-89. Badan Standardisasi Nasional.
_______________________. 2008. SNI 7274 - Kertas Cetak A. Badan Standardisasi Nasional.
Suhartati, Rahmayanti S. 2013. Evaluasi pertumbuhan asal sumber benih Acacia mangium dan Eucalyptus pellita di kalimantan selatan. Tekno Hutan Tanaman 6: 47-54.
Susanto M. 2013. Keragaman Genetik Sifat Kayu Acacia mangium Untuk Produksi Pulp dan Kertas (Disertasi). Fakultas Kehutanan. Universitas Gadjah Mada. Yogyakarta.
Susanto M, Faudzi MA, Setyobudi. 2012. Analisis Sifat Kimia Kayu Eucalyptus pellita Populasi Pemuliaan Untuk Jenis Unggulan Kayu Pulp. Balai Besar Penelitian Bioteknologi Pemuliaan Tanaman Hutan, Yogyakarta.
Susilawati S, Fujisawa Y. 2002. Family Variation on Wood density and Fiber length of Eucalyptus In Seedling Seed Orchard Pelaihari, South Kalimantan. Advandces in Genetics Improvement of Tropical Trees Species. Proceedings Centre for Forest Biotechnology and Tree Improvement. Yogyakarta: 53-56.
Susilawati S, Marsoem SN. 2006. Variation in wood physical properties of
Eucalyptus pellita growing in seedling seed orchard in Pelaihari, South Kalimantan. Journal of Forestry Research 3: 123-138.
130
Teleman A. 2009. Hemicelluloses and Pectins. Ek M, Gellerstedt G, Henriksson G (ed). Pulp and Paper Chemistry and Technology Volume 1. Walter de Gruyter GmbH & Co. Berlin:101-120.
Triantaphyllou E, Mann SH. 1995. Using the analytic hierarchy process for decision making in engineering applications: some challenges. International Journal of Industrial Engineering: Application and Practice 2: 35-44.
Tsoumis G. 1991. Science and Technology of Wood Structure Properties: Utilization. van Hostrand Reinhold. New York.
Walker JCF. 2006. Primary Wood Processing: Principles and Practice. 2nd edition. Springer. Netherlands.
Wimmer R, Downes GM, Evans R, Rasmussen G, French J. 2002. Direct effects of wood characteristics on pulp and handsheet properties of Eucalyptus globulus. Holzforschung 56:244-252.
Wright JW. 1976. Introduction to Forest Genetics. Academic Press. Inc. London. Yahya R, Sugiyama J, Silsia D, Gril J. 2010. Some anatomical featuresof an
Acacia hybrid, A.mangium, and A.auriculiformis grown in Indonesia with regard to pulp yield and papper strength. Journal of Tropical Forest Science
22: 343-351.
Zobel BJ, Talbert JT. 1984. Applied Forest Tree Improvement. John Willey & Sons. New York.
