Mechanical Performance of Reinforced PMMA-Based
Composites for Denture Materials: a Review
by Purnomo Et Al
Submission date: 07-Feb-2023 04:20PM (UTC+0700) Submission ID: 2008416945
File name: IREME_VOL_16_N_8-17-30.pdf (662.36K) Word count: 12720
Character count: 73683
1
3
3
3
6 7
9 13
16 16
17
49 52 61
64
65
2
2 4
4 5
9
12
23
48
62 63
4
4
5 6
6 14
20
24 40
41
42 60
19
32
35
46
47
51 54
55 56
57
11
25 26
27 28 45
10
18
30
33 37
50
10
14
21 31
34 38
39
58
59
2
2
11 8 15
15
22
29
36 43
44
53
14
%SIMILARITY INDEX
9
%INTERNET SOURCES
13
%PUBLICATIONS
4
%STUDENT PAPERS
1
2
%2
1
%3
1
%4
< 1
%5
< 1
%6
< 1
%7
< 1
%Mechanical Performance of Reinforced PMMA-Based Composites for Denture Materials: a Review
ORIGINALITY REPORT
PRIMARY SOURCES
Submitted to Universitas Hang Tuah Surabaya
Student Paper
www.escholar.manchester.ac.uk
Internet Source
test.dovepress.com
Internet Source
Muhammad Sohail Zafar. "Prosthodontic Applications of Polymethyl Methacrylate (PMMA): An Update", Polymers, 2020
Publication
www.ncbi.nlm.nih.gov
Internet Source
Cui Wenguang. "Influence of the surface modification of a filler on the properties of high-impact polystyrene composites", Journal of Applied Polymer Science, 04/05/2009
Publication
Anas Mbarki, Christian Boned, Abderraouf Guelzim, Aziz Ettahir. "Performance of the
8
< 1
%9
< 1
%10
< 1
%11
< 1
%12
< 1
%13
< 1
%Corresponding States Model of Dual-
Reference on the Determination of Viscosity According to the Pressure of Pure
Hydrocarbons", International Review of Mechanical Engineering (IREME), 2022
Publication
ijtech.eng.ui.ac.id
Internet Source
Purnomo Purnomo, Putu Hadi Setyarini.
"Crack-Tip Opening Displacement Behavior Based on Energy Partitioned Work of Fracture Technique on Ultraviolet-Irradiated Mordenite Zeolite-High Density Polyethylene
Composites", International Review of Mechanical Engineering (IREME), 2019
Publication
link.springer.com
Internet Source
pure.manchester.ac.uk
Internet Source
Submitted to Misr International University
Student Paper
Ajay Ranganathan, Suma Karthigeyan, Rahila Chellapillai, Venkateshwaran Rajendran,
Tamizhesai Balavadivel, Anand Velayudhan.
"Effect of novel cycloaliphatic comonomer on the flexural and impact strength of heat-cure
14
< 1
%15
< 1
%16
< 1
%17
< 1
%18
< 1
%19
< 1
%denture base resin", Journal of Oral Science, 2020Publication
"Polymer Nanocomposites Based on
Inorganic and Organic Nanomaterials", Wiley, 2015Publication
Madhu Keshava Bangera, Ravindra Kotian, Ravishankar N. "Effect of titanium dioxide nanoparticle reinforcement on flexural
strength of denture base resin: A systematic review and meta-analysis", Japanese Dental Science Review, 2020
Publication
Aparajita Patnaik, Priyanka Aiyer, Sivaranjani Gali, Deveswaran R. "Flexural strength and anti-fungal activity of copper nano-particles on poly-methyl methacrylate denture base resins", Materials Today: Proceedings, 2021
Publication
aast.edu
Internet Source
www.tandfonline.com
Internet Source
Fumitake Tsue, Yutaka Takahashi, Hiroshi Shimizu. "Reinforcing effect of glass-fiber- reinforced composite on flexural strength at
20
< 1
%21
< 1
%22
< 1
%23
< 1
%24
< 1
%25
< 1
%the proportional limit of denture base resin", Acta Odontologica Scandinavica, 2009
Publication
G.M. Domínguez Almaraz, A. Gutiérrez
Martínez, R. Hernández Sánchez, E. Correa Gómez et al. "Ultrasonic Fatigue Testing on the Polymeric Material PMMA, Used in
Odontology Applications", Procedia Structural Integrity, 2017
Publication
issuu.com
Internet Source
worldwidescience.org
Internet Source
Submitted to Indian Institute of Technology, Bombay
Student Paper
Jinan Chai, Fuzhi Lu, Baoming Li, Daniel Y.
Kwok. "Wettability Interpretation of Oxygen Plasma Modified Poly(methyl methacrylate)", Langmuir, 2004
Publication
Mahroo Vojdani, Rafat Bagheri, Amir Ali Reza Khaledi. "Effects of aluminum oxide addition on the flexural strength, surface hardness, and roughness of heat-polymerized acrylic resin", Journal of Dental Sciences, 2012
Publication
26
< 1
%27
< 1
%28
< 1
%29
< 1
%30
< 1
%31
< 1
%32
< 1
%33
< 1
%Nadia Elwakiel, Yusif El-Sayed, Hend
Elkafrawy. "Synthesis, characterization of Ag+
and Sn2+ complexes and their applications to improve the biological and mechanical
properties of denture base materials", Journal of Molecular Structure, 2020
Publication
Sara T. Alzayyat, Ghadah A. Almutiri, Jawhara K. Aljandan, Raneem M. Algarzai et al. "
Antifungal Efficacy and Physical Properties of Poly(methylmethacrylate) Denture Base
Material Reinforced With SiO Nanoparticles ", Journal of Prosthodontics, 2020
Publication
adum.um.edu.my
Internet Source
bic-pk.ceon.rs
Internet Source
dottorato.fisica.uniba.it
Internet Source
www.mdpi.com
Internet Source
www.thieme-connect.com
Internet Source
www2.mdpi.com
Internet Source
34
< 1
%35
< 1
%36
< 1
%37
< 1
%38
< 1
%Caroline Aymes-Chodur, Hanène Salmi-Mani, Diana Dragoe, Nadine Aubry-Barroca, Marie Buchotte, Philippe Roger. "Optimization of microwave plasma treatment conditions on polydimethylsiloxane films for further surface functionalization", European Polymer Journal, 2021Publication
F. Keyf. "The effects of HEMA-monomer and air atmosphere treatment of glass fibre on the transverse strength of a provisional fixed partial denture resin", Journal of Oral
Rehabilitation, 11/2003
Publication
Md. Alamgir, Ashis Mallick, G. C. Nayak, Santosh K. Tiwari. "Development of
PMMA/TiO2 nanocomposites as excellent dental materials", Journal of Mechanical Science and Technology, 2019
Publication
Mennatullah Khalil, Lamis Enaba. "Influence of Antimicrobial Nanoparticles on Flexural
Strength and Hardness of
Polymethylmethacrylate", Open Access
Macedonian Journal of Medical Sciences, 2021
Publication
Pyun, Jung-Hoon, Tae-Bong Shin, Joo-Hee Lee, Kang-Min Ahn, Tae-Hyung Kim, and Hyun-Suk
39
< 1
%40
< 1
%41
< 1
%Cha. "Effects of hydrogen peroxide
pretreatment and heat activation of silane on the shear bond strength of fiber-reinforced composite posts to resin cement", The Journal of Advanced Prosthodontics, 2016.
Publication
Rachna Maheshwari, Kanesha Abrol, Samarth K Agarwal, Romil Singhal, Swatantra Agarwal.
"Evaluation of Impact Strength and Surface Hardness of Acrylic Resin Modified with
Different Nano Materials: An In Vitro Study", International Journal of Prosthodontics and Restorative Dentistry, 2019
Publication
Saadet Atsu, Yasemin KeskIn. "Effect of silica coating and silane surface treatment on the bond strength of soft denture liner to denture base material", Journal of Applied Oral
Science, 2013
Publication
Savita Kumari, Ajaz Hussain, Jitendra Rao, Kalpana Singh, Sarvesh Kumar Avinashi,
Chandkiram Gautam. "Structural, mechanical and biological properties of PMMA-ZrO2
nanocomposites for denture applications", Materials Chemistry and Physics, 2022
Publication
42
< 1
%43
< 1
%44
< 1
%45
< 1
%46
< 1
%47
< 1
%48
< 1
%49
< 1
%50
< 1
%51
< 1
%YU, Sang-Hui, Yoon LEE, Seunghan OH, Hye- Won CHO, Yutaka ODA, and Ji-Myung BAE.
"Reinforcing effects of different fibers on denture base resin based on the fiber type, concentration, and combination", Dental Materials Journal, 2012.
Publication
cellmat.es
Internet Source
dokumen.pub
Internet Source
downloads.hindawi.com
Internet Source
etheses.whiterose.ac.uk
Internet Source
fr.scribd.com
Internet Source
pubs.sciepub.com
Internet Source
synapse.koreamed.org
Internet Source
theses.gla.ac.uk
Internet Source
www.hindawi.com
Internet Source
52
< 1
%53
< 1
%54
< 1
%55
< 1
%56
< 1
%www.jmest.org
Internet Source
Anna Kubacka, Cristina Serrano, Manuel Ferrer, Heinrich Lünsdorf et al. " High- Performance Dual-Action Polymer−TiO
Nanocomposite Films via Melting Processing
", Nano Letters, 2007
Publication
Basak Bolukbasi, Ebru Kucukyilmaz.
"Evaluation of the bond strengths of
restorative materials to primary tooth dentin treated with different pulpotomy techniques", Microscopy Research and Technique, 2021
Publication
Gianluca Zappini, Axel Kammann, Wolfgang Wachter. "Comparison of fracture tests of denture base materials", The Journal of Prosthetic Dentistry, 2003
Publication
Kaan Yerliyurt, Taha B. Taşdelen, Özlem Eğri, Sinan Eğri. "Comparative Investigation on the Effect of Fiber Additives with Different
Characteristics on the Mechanical Strength of Heat-cured PMMA Denture Base Resins",
Research Square Platform LLC, 2022
Publication
57
< 1
%58
< 1
%59
< 1
%60
< 1
%61
< 1
%P. K. VALLITTU. "Curing of a silane coupling agent and its effect on the transverse
strength of autopolymerizing
polymethylmethacrylate-glass fibre
composite", Journal of Oral Rehabilitation, 06/28/2008
Publication
R. Karthick, P. Sirisha, M. Ravi Sankar.
"Mechanical and Tribological Properties of PMMA-Sea Shell based Biocomposite for Dental application", Procedia Materials Science, 2014
Publication
e-space.mmu.ac.uk
Internet Source
"Abstracts of Papers", Journal of Dental Research, 2016
Publication
Aftab Ahmed Khan, Muhammad Amber Fareed, Abdulkarim Hussain Alshehri,
Alhanoof Aldegheishem et al. "Mechanical Properties of the Modified Denture Base Materials and Polymerization Methods: A Systematic Review", International Journal of Molecular Sciences, 2022
Publication
62
< 1
%63
< 1
%64
< 1
%65
< 1
%Gray Hun Li, Shiyao Chen, Anastasiia Grymak, John Neil Waddell, John Jungki Kim, Joanne Jung Eun Choi. "Fibre-reinforced and repaired PMMA denture base resin: Effect of
placement on the flexural strength and load- bearing capacity", Journal of the Mechanical Behavior of Biomedical Materials, 2021
Publication
Ming Yuan, Dayun Huang, Yixuan Zhao.
"Development of Synthesis and Application of High Molecular Weight Poly(Methyl
Methacrylate)", Polymers, 2022
Publication
Pornpot JIANGKONGKHO, Mansuang
ARKSORNNUKIT, Hidekazu TAKAHASHI. "The synthesis, modification, and application of nanosilica in polymethyl methacrylate
denture base", Dental Materials Journal, 2018
Publication
Sahar Abdulrazzaq Naji, Marjan
Behroozibakhsh, Tahereh Sadat Jafarzadeh Kashi, Hossein Eslami et al. " Effects of
incorporation of 2.5 and 5 wt% TiO nanotubes on fracture toughness, flexural strength, and microhardness of denture base poly methyl methacrylate (PMMA) ", The Journal of
Advanced Prosthodontics, 2018
Publication
Exclude quotes Off Exclude bibliography On
Exclude matches Off
