UPS APC SURT10000XLi

(1)

UPS APC SURT10000XLi

Detail Specifications

Features 1:1 and 3:1 Combo in a Single Product, Audible Alarms, Automatic Self Test, Automatic Shutdown, Automatic Voltage Regulation (AVR), Built-in automatic bypass, Built-in manual bypass, Built-in Web/SNMP management, Cold-start, Compact and Lightweight, Designed and manufactured under ISO9001 / ISO14001 certification, Double Conversion On-Line, Downloadable Firmware, Early-warning Problem Notification, EPO, Faster Recharge Time, Flashing LED, Generator Compatible, Hardwire Capabilities, Hot Swap Batteries, Input Power Factor Correction, Intelligent Battery Management, Lightning and Surge Protection, Load Meter, Monitoring via Network and Web,

Interface  1x Serial RS-232 (DB-9) Port

 SmartSlot

Softwares Available

(2)

Output Power

Input Power Voltage  Nominal Input Voltage 230V

 Input Frequency 50/60 Hz +/- 5

Hz (auto sensing)

 Input Connections

 Hard Wire 3 wire (1PH+N+G)

 Hard Wire 5-wire (3PH + N + G)

 Input voltage range for main operations 160 - 280V

 Other Input Voltages 220, 240

 Input Total Harmonic Distortion Less than 7% for full load

Surge Energy Rating 480 joules

Surge Energy FilteringFFull time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449

Back-Up Time Half Load

 Internal Battery : 14.9 Minutes

 Internal Battery + 1

SURT192XLBP : 36.7 Minutes

(3)

Back-Up Time Full Load

 Internal Battery : 4.8 Minutes

Battery Type  Battery Type Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof

 Included Battery Modules 4

 Typical recharge time 2.20 hour(s)

 Replacement Battery RBC44

Dimensions (263 x 432 x 736 mm) WHD

Weight 129.09 Kg