REFERENCES
Abhang, L. B., and Hameedullah, M. (2012). Optimization of machining parameters in steel turning operation by Taguchi method. Procedia Engineering, 38, 40–48.
https://doi.org/10.1016/j.proeng.2012.06.007
Ali, M. H., Khidhir, B. A., Mohamed, B., and Oshkour, A. A. (2012). Investigation on chip formation during machining using finite element modeling. Advanced Materials Research, 505(April), 31–36.
https://doi.org/10.4028/www.scientific.net/AMR.505.31
Arbib, M. A. (2015). The Handbook of Brain Theory and Neuron Network (M. A.
Arbib (Ed.); 2nd Editio, Vol. 1). The MIT Press.
Astra Manufacturing Polytechnic. (2019). Documentation of Mechanical Engineering Department.
Athreya, S., and Venkatesh, Y. D. (2012). Application Of Taguchi Method For Optimization Of Process Parameters In Improving The Surface Roughness Of Lathe Facing Operation. International Refereed Journal of Engineering and Science, 1(3), 13–19. https://doi.org/2319-1821
Awopetu, O. O., & Ayodeji, S. P. (2008). Effect of Type of Workpiece Material on Chip Formation Process. 11(3), 181–186.
Bilgin, M. B. (2015). Investigating the effects of cutting parameters on the built-up- layer and built-up-edge formation during the machining of AISI 310 austenitic stainless Steels. Materiali in Tehnologije, 49(5), 779–784.
https://doi.org/10.17222/mit.2014.253
Cassier, Z., Prato, Y., and Muñoz-Escalona, P. (2004). Built-up edge effect on tool wear when turning steels at low cutting speed. Journal of Materials Engineering and Performance, 13(5), 542–547. https://doi.org/10.1361/10599490420629
Chauvin, Y., and Rumelhart, D. E. (1995). Backpropagation Theory, Architectures, and Applications (Y. Chauvin & D. E. Rumelhart (Eds.)). Lawrence Erlbaum Associates.
Components, L. (n.d.). Chapter 5 Turning Methods & Machines. 2–9.
Dahbi, S., Moussami, H. El, Ezzine, L., Samya, D., and Haj, E. L. M. (2015).
Optimization of turning parameters for surface roughness To cite this version : HAL Id : hal-01260818 Optimization of turning parameters for surface
roughness. Xème Conférence Internationale : Conception et Production Intégrées. https://hal.archives-ouvertes.fr/hal-01260818/document
Desaigues, J. E., Lescalier, C., Bomont-Arzur, A., Dudzinski, D., & Bomont, O.
(2016). Experimental study of Built-Up Layer formation during machining of high strength free-cutting steel. Journal of Materials Processing Technology, 236, 204–215. https://doi.org/10.1016/j.jmatprotec.2016.05.016
Dutta, A. (2021). Crossover in Genetic Algorithm - GeeksforGeeks. Geeks for Geeks, 1–7.
Easy, A. N., Choose, T. O., To, E., Cutting, U. S. E., and Selection, T. (2019). Cutting tools.
Ekinovic, S., Dolinsek, S., and Jawahir, I. S. (2004). Some observations of the chip formation process and the white layer formation in high speed milling of hardened steel. Machining Science and Technology, 8(2), 327–340.
https://doi.org/10.1081/MST-200029250
Gaxiola, F., Melin, P., and Valdez, F. (2016). New Backpropagation Algorithm with Type-2 Fuzzy Weights for Neural Networks. In K. Janusz, Warsaw, and Poland (Eds.), SpringerBriefs in Computational Intelligence. Springer.
https://doi.org/10.1007/978-3-319-34087-6
Gen, M., Cheng, R., and Lin, L. (2008). Network Models and Optimization Multiobjective - Multiobjective Genetic Algorithm Approach. In Studies in
Computational Intelligence. Springer. https://doi.org/10.1007/978-1-84800-181- 7
Hristev, R. M. (1998). The ANN Book (1st Editio). GNU Public License, ver. 2.
Jafarian, F., Taghipour, M., and Amirabadi, H. (2013). Application of artificial neural network and optimization algorithms for optimizing surface roughness, tool life and cutting forces in turning operation. Journal of Mechanical Science and Technology, 27(5), 1469–1477. https://doi.org/10.1007/s12206-013-0327-0 Jain, L., and Fanelli, A. M. (2000). Recent Adventages in Artificial Neural Network
Design and Applications. CRC Press.
Kaisan, E., and Usman, M. (2012). Effects of Tool Rake Angle on Tool Life in
Turning Tools. International Journal of Scientific & Engineering Research, 3(4).
http://www.ijser.org
Kharagpur. (n.d.). Dynamometers for measuring cutting forces. Mechanics of Machining, Version 2, 14.
Kora, P., and Yadlapalli, P. (2017). Crossover Operators in Genetic Algorithms: A Review. International Journal of Computer Applications, 162(10), 34–36.
https://doi.org/10.5120/ijca2017913370
Kovvuri, V. R. (2015). Experimental Study of Built-up-edge Formation in Micro Milling. August.
Kramer, O. (2017). Genetic Algorithm Essentials. In Springer International
Publishing AG (Vol. 679). Springer. https://doi.org/10.1007/978-3-319-52156-5 Krenker, A., Bes?ter, J., and Kos, A. (2011). Introduction to the Artificial Neural
Networks. In Artificial Neural Networks-Methodological Advances and Biomedical Applications. https://doi.org/10.5772/15751
Kumar S G, V., and Panneerselvam, R. (2016). A Study of Crossover Operators for Genetic Algorithms to Solve VRP and its Variants and New Sinusoidal Motion
Crossover Operator. American Journal of Industrial and Business Management, 06(06), 774–789.
Kurtaran, H., Ozcelik, B., & Erzurumlu, T. (2005). Warpage optimization of a bus ceiling lamp base using neural network model and genetic algorithm. Journal of Materials Processing Technology, 169(2), 314–319.
https://doi.org/10.1016/j.jmatprotec.2005.03.013
Manufacturing, M. (2007). 21 Theory of Metal Machining. 131–143.
Mathiselvan, G., Sundaravel, S., Chaitanya, S., and Kaja Bantha Navas, R. (2016).
Application of taguchi method for optimization of process parameters in analyzing the cutting forces of lathe turning operation. International Journal of Pure and Applied Mathematics, 109(8 Special Issue), 129–136.
Nguyen, H. T., & Hsu, Q. C. (2016). Surface roughness analysis in the hard milling of JIS SKD61 alloy steel. Applied Sciences (Switzerland), 6(6).
https://doi.org/10.3390/app6060172
Panzera, T. H., Souza, P. R., Rubio, J. C. C., Abrão, A. M., and Mansur, T. R. (2012).
Development of a three-component dynamometer to measure turning force.
International Journal of Advanced Manufacturing Technology, 62(9–12), 913–
922. https://doi.org/10.1007/s00170-011-3866-5
Pragajibhai, D. H., Nalwaya, S., Singh, P., and Jain, R. (2018). Optimization of Machining Parameters on Surface Roughness by Taguchi Approach. V(Iv), 349–
361.
Rao, S. R., and Padmanabhan, G. (2012). Application of Taguchi methods and ANOVA in optimization of process parameters for metal removal rate in electrochemical machining of Al/5% SiC composites. International Journal of Engineering Research and …, 2(3), 192–197.
Raus, A. A., Wahab, M. S., Ibrahim, M., Kamarudin, K., Ahmed, A., and Sa’ude, N.
(2017). A comparative study of mould base tool materials in plastic injection
moulding to improve cycle time and warpage using statistical method. Journal of Mechanical Engineering, SI 4(1), 1–17.
Roy, R. K. (2010). A Primer on The Taguchi Method (E. J. Kehoe (Ed.); 2nd Editio).
Society of Manufacturing Engineers.
Sahay, C., and Ghosh, S. (2018). Understanding surface quality: Beyond average roughness (Ra). ASEE Annual Conference and Exposition, Conference Proceedings, 2018-June. https://doi.org/10.18260/1-2--31176
Schneider, G., and Cmfge, J. (n.d.). g n i t Cut Tool s n o i t a c i l p p Chapter 2 Metal Removal Methods.
Segments, C. (n.d.). Turning and the Lathe : Definition and History. 43–99.
Siang, J. J. (2005). Jaringan Syaraf Tiruan dan Pemrogramannya Menggunakan Matlab (Edisi Pert). Andi Publisher.
Solarte-Pardo, B., Hidalgo, D., and Yeh, S. S. (2019). Cutting insert and parameter optimization for turning based on artificial neural networks and a genetic algorithm. Applied Sciences (Switzerland), 9(3).
https://doi.org/10.3390/app9030479
Steel, I. S., and Steel, H. (1866). Comparisons of Materials between JIS and Foreign Standards 2 Steel Brand Comparative Table / Hardness of Materials and Corresponding Tools DIN OCT. 1866.
Suleyman. (2012). 1 DESIGN, DEVELOPMENT AND TESTING OF A TURNING DYNAMOMETER FOR CUTTING FORCE MEASUREMENT Süleyman Yald ı z. DESIGN, DEVELOPMENT AND TESTING OF A TURNING
DYNAMOMETER FOR CUTTING FORCE MEASUREMENT, 1–21.
Taguchi, G., Chowdhury, S., and Wu, Y. (2005). Taguchi’s Quality Engineering Handbook. In S. Taguchi & H. Yano (Eds.), Taguchi’s Quality Engineering Handbook. John Wiley & Sons, Inc.
Taguchi, G., and Jugulum, R. (2002). The Mahalanobis-Taguchi Strategy: A Pattern Technology System. John Wiley & Sons, Inc. https://doi.org/2002003927 TRAINING TEORY Turning. (n.d.).
Xu, H., Jaynes, J., and Ding, X. (2014). Combining two-level and three-level orthogonal arrays for factor screening and response surface exploration.
Statistica Sinica, 24(1), 269–289. https://doi.org/10.5705/ss.2012.210
Yarlagadda, P. K. D. V., and Khong, C. A. T. (2001). Development of a hybrid neural network system for prediction of process parameters in injection moulding.
Journal of Materials Processing Technology, 118(1–3), 109–115.
https://doi.org/10.1016/s0924-0136(01)00901-3
Zeman, P., Sc, M., Mádl, P. J., Sc, M., and Ph, D. (2015). The Effect of Cutting Speed on Chip Formation Process The Effect of Cutting Speed on Chip Formation Process Summary : Abstract : January 2005.
APPENDIX Appendix 1 Cutting Speed recomendation
