An analytical approach on the
tribological behaviour of pocketed slider bearings with boundary slip
including cavitation
by Mohammad Tauviqirrahman
Submission date: 03-Feb-202011:53AM (UTC+0700) Submission ID: 136197959
File name: eted_slider_bearings_with_boundary_slip_including_cavitation.pdf (1.74M) Word count: 7670
Character count: 36261
11
%SIMILARIT Y INDEX
3
%INT ERNET SOURCES
10
%PUBLICAT IONS
1
%ST UDENT PAPERS
1
1
%2
1
%3
1
%4
1
%An analytical approach on the tribological behaviour of pocketed slider bearings with boundary slip including cavitation
ORIGINALITY REPORT
PRIMARY SOURCES
T. V. V. L. N. Rao. "Theoretical Prediction of Journal Bearing Stability Characteristics Based on the Extent of the Slip Region on the Bearing Surface", Tribology Transactions, 11/2009
Publicat ion
Guo, F.. "Full and partial boundary slippage effect on squeeze film bearings", Tribology International, 201005/06
Publicat ion
T.V.V.L.N. Rao, A.M.A. Rani, T. Nagarajan, F.M.
Hashim. "Analysis of couple stress fluid lubricated partially textured slip slider and journal bearing using narrow groove theory", Tribology International, 2014
Publicat ion
Jing Han. "Hydrodynamic Lubrication of
Microdimple Textured Surface Using Three- Dimensional CFD", Tribology Transactions, 11/2010
5
1
%6
1
%7
< 1
%8
< 1
%9
< 1
%10
< 1
%11
< 1
%Publicat ion
powerlab.fsb.hr
Int ernet Source
RICHARD SALANT. "Numerical Analysis of a Slider Bearing with a Heterogeneous Slip/No- Slip Surface", Tribology Transactions, 7/1/2004
Publicat ion
linknovate.com
Int ernet Source
T. V. V. L. N. Rao. "Analysis of Single-Grooved Slider and Journal Bearing With Partial Slip Surface", Journal of Tribology, 2010
Publicat ion
G. J. Ma. "Influence of wall slip on the
hydrodynamic behavior of a two-dimensional slider bearing", Acta Mechanica Sinica,
11/21/2007
Publicat ion
Prawal Sinha. "THD analysis for slider bearing with roughness: special reference to load
generation in parallel sliders", Acta Mechanica, 10/10/2008
Publicat ion
M B Dobrica. "About the validity of Reynolds equation and inertia effects in textured sliders of infinite width", Proceedings of the Institution
12
< 1
%13
< 1
%14
< 1
%15
< 1
%16
< 1
%17
< 1
%of Mechanical Engineers Part J Journal of Engineering Tribology, 02/01/2009
Publicat ion
S M Yao, Wee Kin Teo, Zunmin Geng, Sam Turner, Keith Ridgway. "Squeeze Film
Damping and Application in Shell Machining", IOP Conference Series: Materials Science and Engineering, 2011
Publicat ion
Chien-Yu Chen, Qie-Da Chen, Wang-Long Li.
"Characteristics of journal bearings with
anisotropic slip", Tribology International, 2013
Publicat ion
Aurelian, F.. "Wall slip effects in (elasto) hydrodynamic journal bearings", Tribology International, 201107
Publicat ion
GuoJun Ma. "Hydrodynamics of slip wedge and optimization of surface slip property", Science in China Series G Physics Mechanics and
Astronomy, 06/2007
Publicat ion
digital.library.unt.edu
Int ernet Source
Shen, Cong, and M. M. Khonsari. "Effect of Dimple’s Internal Structure on Hydrodynamic Lubrication", Tribology Letters, 2013.
18
< 1
%19
< 1
%20
< 1
%21
< 1
%22
< 1
%23
< 1
%Publicat ion
Submitted to University of Dayton
St udent Paper
Syed Ismail, M Sarangi. "Effects of texture shape and fluid–solid interfacial slip on the hydrodynamic lubrication performance of parallel sliding contacts", Proceedings of the Institution of Mechanical Engineers, Part J:
Journal of Engineering Tribology, 2013
Publicat ion
www.imperial.ac.uk
Int ernet Source
Qiyin Lin, Zhengying Wei, Yubin Zhang, Ning Wang. "Effects of the slip surface on the
tribological performances of high-speed hybrid journal bearings", Proceedings of the Institution of Mechanical Engineers, Part J: Journal of
Engineering Tribology, 2016
Publicat ion
159.226.230.4
Int ernet Source
Rahmani, Ramin, Ayoub Shirvani, and Hassan Shirvani. "Optimization of Partially Textured Parallel Thrust Bearings With Square-Shaped Micro-Dimples", Part B Magnetic Storage
Tribology Manufacturing/Metalworking
24
< 1
%25
< 1
%26
< 1
%27
< 1
%28
< 1
%Tribology Nanotribology Engineered Surfaces Biotribology Emerging Technologies Special Symposia on Contact Mechanics Special Symposium on Nanotribology, 2006.
Publicat ion
Multidiscipline Modeling in Materials and Structures, Volume 8, Issue 2 (2012-08-18)
Publicat ion
Jao, Hsiang-Chin, Kuo-Ming Chang, Li-Ming Chu, and Wang-Long Li. "A Lubrication Theory for Anisotropic Slips and Flow Rheology",
Tribology Transactions, 2015.
Publicat ion
W-L Li. "On the squeeze flow between two rigid spheres with partially wetted surfaces",
Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology, 01/01/2010
Publicat ion
Yang, S., H. Wang, and F. Guo. "Experimental investigation on the groove effect in
hydrodynamic lubrication", Proceedings of the Institution of Mechanical Engineers Part J
Journal of Engineering Tribology, 2012.
Publicat ion
polen.itu.edu.tr
Int ernet Source
29
< 1
%30
< 1
%31
< 1
%32
< 1
%33
< 1
%34
< 1
%dr.ntu.edu.sg
Int ernet Source
Prakash, S., and G. Nagarajan. "Theoretical Model for the Optimal Design of Surface Texturing on Piston Compression Ring", Applied Mechanics and Materials, 2015.
Publicat ion
Song, Y., C.-w. Gu, and X. Ren. "Development and validation of a gaseous cavitation model for hydrodynamic lubrication", Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology, 2015.
Publicat ion
M B Dobrica. "Optimizing surface texture for hydrodynamic lubricated contacts using a mass-conserving numerical approach",
Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology, 01/01/2010
Publicat ion
Shen, Cong, and M. M. Khonsari. "On the
Magnitude of Cavitation Pressure of Steady- State Lubrication", Tribology Letters, 2013.
Publicat ion
"Advances in Mechanical Design", Springer Nature, 2018
Publicat ion
35
< 1
%36
< 1
%37
< 1
%38
< 1
%39
< 1
%40
< 1
%41
Daniele Savio, Kerstin Falk, Michael Moseler.
"Slipping domains in water-lubricated
microsystems for improved load support", Tribology International, 2018
Publicat ion
www.beilstein-journals.org
Int ernet Source
itzhak.green.gatech.edu
Int ernet Source
Rao, T.V.V.L.N., A.M.A. Rani, T. Nagarajan, and F.M. Hashim. "Analysis of slider and journal
bearing using partially textured slip surface", Tribology International, 2012.
Publicat ion
G Bayada. "Impact of the cavitation model on the theoretical performance of heterogeneous slip/no-slip engineered contacts in
hydrodynamic conditions", Proceedings of the Institution of Mechanical Engineers Part J
Journal of Engineering Tribology, 05/01/2009
Publicat ion
G. J. Ma. "Influence of Wall Slip on the Dynamic Properties of a Rotor-Bearing System", Tribology Transactions, 3/2008
Publicat ion
G. J. Ma. "Multi-linearity algorithm for wall slip
< 1
%42
< 1
%43
< 1
%44
< 1
%Exclude quotes Of f Exclude bibliography On
Exclude matches Of f
in two-dimensional gap flow", International
Journal for Numerical Methods in Engineering, 03/19/2007
Publicat ion
Lin, Qiyin Li, Baotong. "Comparison of the
influences of surface texture and boundary slip on tribological performances.(Rese",
Mathematical Problems in Engineering, Annual 2015 Issue
Publicat ion
Qiyin Lin, Zhengying Wei, Ning Wang, Wei
Chen. "Effect of large-area texture/slip surface on journal bearing considering cavitation",
Industrial Lubrication and Tribology, 2015
Publicat ion
P. Brajdic-Mitidieri, A. D. Gosman, E. Ioannides, H. A. Spikes. "CFD Analysis of a Low Friction Pocketed Pad Bearing", Journal of Tribology, 2005
Publicat ion
FINAL GRADE
/0
An analytical approach on the tribological behaviour of pocketed slider bearings with boundary slip including cavitation
GRADEMARK REPORT
GENERAL COMMENTS
Instructor
PAGE 1 PAGE 2 PAGE 3 PAGE 4 PAGE 5 PAGE 6 PAGE 7 PAGE 8 PAGE 9 PAGE 10 PAGE 11 PAGE 12 PAGE 13 PAGE 14 PAGE 15 PAGE 16 PAGE 17 PAGE 18
PAGE 19 PAGE 20