AutoCAD Command Usage

(1)

Regenerating model.

AutoCAD menu utilities loaded.*Cancel*

Command:

Command: UN UNITS

Command: Regenerating model.

UN UNITS Command: L LINE

Specify first point:

Specify next point or [Undo]: 1500 Specify next point or [Undo]: 850 Specify next point or [Close/Undo]: 1500 Specify next point or [Close/Undo]:

Specify next point or [Close/Undo]: *Cancel*

Command: TR TRIM

Current settings: Projection=UCS, Edge=None, Mode=Quick Select object to trim or shift-select to extend or

[cuTting edges/Crossing/mOde/Project/eRase]:

Select object to trim or shift-select to extend or [cuTting edges/Crossing/mOde/Project/eRase/Undo]:

Select object to trim or shift-select to extend or

[cuTting edges/Crossing/mOde/Project/eRase/Undo]: *Cancel*

Command: END

Discontinued command. Use the QUIT command to exit AutoCAD.

Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:

Command: O

(2)

OFFSET

Current settings: Erase source=No Layer=Source OFFSETGAPTYPE=0 Specify offset distance or [Through/Erase/Layer] <Through>: 50.8 Select object to offset or [Exit/Undo] <Exit>:

Specify point on side to offset or [Exit/Multiple/Undo] <Exit>: *Cancel*

Command: O OFFSET

Current settings: Erase source=No Layer=Source OFFSETGAPTYPE=0 Specify offset distance or [Through/Erase/Layer] <50.8000>: 50.8 Select object to offset or [Exit/Undo] <Exit>:

Specify point on side to offset or [Exit/Multiple/Undo] <Exit>:

Select object to offset or [Exit/Undo] <Exit>:

Select object to offset or [Exit/Undo] <Exit>: *Cancel*

Command: L LINE

Specify first point: *Cancel*

Command: OS OSNAP

Automatic save to C:\Users\CINDYA~1\AppData\Local\Temp\Drawing1_1_15331_d785b897.sv$ ...

Command:

Command: L LINE

Specify next point or [Undo]: 648.4 Specify next point or [Undo]:

(3)

Command: L LINE

Command: TR TRIM

Command:

Command: _.erase 1 found Command: L

LINE

(4)

Specify next point or [Undo]: 2000 Specify next point or [Undo]: *Cancel*

Command: L LINE

Specify next point or [Undo]: 470.45 Specify next point or [Undo]: 50.8 Specify next point or [Close/Undo]:

Command: L LINE

Specify next point or [Undo]:

Specify next point or [Undo]: *Cancel*

Command: TR TRIM

Command: L LINE

Specify next point or [Undo]: 324.1 Specify next point or [Undo]: 648.4 Specify next point or [Close/Undo]: 510 Specify next point or [Close/Undo]: *Cancel*

(5)

Command:

Command: _.erase 1 found Command: *Cancel*

Command: L LINE

Specify next point or [Undo]: 510 Specify next point or [Undo]:

Command:

Command: L LINE

Command:

(6)

Command: *Cancel*

Command:

Command: _.erase 1 found

Command:

Command: _.erase 1 found Command: REC

RECTANG

Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]:

Specify other corner point or [Area/Dimensions/Rotation]:

Specify other corner point or [Area/Dimensions/Rotation]: *Cancel*

Command:

Command: L LINE

Command: REC RECTANG

Specify other corner point or [Area/Dimensions/Rotation]: 50.8 Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:

Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: *Cancel*

Command: *Cancel*

Command:

Command: _.erase 1 found Command:

Command: _.erase 1 found Command: RE

REGEN Regenerating model.

(7)

Command: *Cancel*

Specify other corner point or [Area/Dimensions/Rotation]: 50.8 Command: *Cancel*

Command: *Cancel*

Specify other corner point or [Area/Dimensions/Rotation]: 470.45 Command: L

LINE

Specify next point or [Undo]: 324.1 Specify next point or [Undo]: *Cancel*

Specify other corner point or [Area/Dimensions/Rotation]: 648.4 Command: L

LINE

(8)

Command:

Command: _.erase 1 found Command: Regenerating model.

L LINE

Command: L LINE

Specify next point or [Undo]: 257.2 Specify next point or [Undo]: 75

Command:

Command: _.erase 1 found Command: L

LINE

Command:

Command: _.erase 1 found Command:

Press ESC or ENTER to exit, or right-click to display shortcut-menu.

Regenerating model.

Command:

(9)

Command: EXT EXTRUDE

Current wire frame density: ISOLINES=4, Closed profiles creation mode = Solid 1 found

Specify height of extrusion or [Direction/Path/Taper angle/Expression]: *Cancel*

Command: *Cancel*

Command: '_-view Enter an option [?/Delete/Orthographic/Restore/Save/sEttings/Window]: _front Regenerating model.

Command: RECTANG

Specify other corner point or [Area/Dimensions/Rotation]: 1500 Command: RECTANG

Specify other corner point or [Area/Dimensions/Rotation]: 50.8 Command: RECTANG

Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]: *Cancel*

Command: COPY Select objects: 1 found Select objects:

Current settings: Copy mode = Multiple

Specify base point or [Displacement/mOde] <Displacement>:

Specify second point or [Array] <use first point as displacement>:

Specify second point or [Array/Exit/Undo] <Exit>: *Cancel*

Command: RECTANG

Specify other corner point or [Area/Dimensions/Rotation]: 50.8 Command: LINE

(10)

Specify next point or [Undo]: 699.20 Specify next point or [Undo]: *Cancel*

Command: RECTANG

Specify other corner point or [Area/Dimensions/Rotation]: 50.8 Command: Regenerating model.

RECTANG

Specify other corner point or [Area/Dimensions/Rotation]: 470.45 Command:

Regenerating model.

Specify height of extrusion or [Direction/Path/Taper angle/Expression]: *Cancel*

Command:

Command: EXTRUDE

Specify height of extrusion or [Direction/Path/Taper angle/Expression]: 50.8

Command: '_-view Enter an option [?/Delete/Orthographic/Restore/Save/sEttings/Window]: _right Regenerating model.

'_-view Enter an option [?/Delete/Orthographic/Restore/Save/sEttings/Window]: _front Regenerating model.

(11)

Command:

Regenerating model.

Command: LINE Specify first point:

Command: COPY 6 found

Specify second point or [Array] <use first point as displacement>: *Cancel*

Command: *Cancel*

Command: RECTANG

(12)

Command:

Regenerating model.

Command:

Regenerating model.

Command:

Command: _.erase 1 found Command: RECTANG

Command:

Regenerating model.

Specify height of extrusion or [Direction/Path/Taper angle/Expression] <50.8000>: 50.8 Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:

Command: MOVE 1 found

Specify base point or [Displacement] <Displacement>:

(13)

Specify second point or <use first point as displacement>:

Specify second point or [Array/Exit/Undo] <Exit>:

Specify second point or [Array/Exit/Undo] <Exit>: '_.zoom

>>Specify corner of window, enter a scale factor (nX or nXP), or

[All/Center/Dynamic/Extents/Previous/Scale/Window/Object] <real time>: _e

** Requires a regen, cannot be transparent.

Resuming COPY command.

Command: MOVE 1 found

Command:

Regenerating model.

(14)

Command: Cop

Unknown command "COP". Press F1 for help.

Command: *Cancel*

Command: COPY Select objects: 1 found Select objects:

*Cancel*

Command: *Cancel*

Command: _vscurrent

Enter an option [2dwireframe/Wireframe/Hidden/Realistic/Conceptual/Shaded/shaded with Edges/shades of Gray/SKetchy/X-ray/Other] <2dwireframe>: _r

Command:

Opening an AutoCAD 2018 format file.

Regenerating model.

AutoCAD menu utilities loaded.

Command:

Autodesk DWG. This file is a TrustedDWG last saved by an Autodesk application or Autodesk licensed application.

Command:

Regenerating model.

Command: LINE

(15)

Command: '_-view Enter an option [?/Delete/Orthographic/Restore/Save/sEttings/Window]: _top Regenerating model.

Command: LINE

Command: OSNAP Command:

Regenerating model.

Command: LINE Specify first point:

Command:

Command: OFFSET

Current settings: Erase source=No Layer=Source OFFSETGAPTYPE=0 Specify offset distance or [Through/Erase/Layer] <Through>: 30 Specify point on side to offset or [Exit/Multiple/Undo] <Exit>:

Command:

STRETCH

Specify stretch point or [Base point/Copy/Undo/eXit]:

Command:

** STRETCH **

Command: *Cancel*

Command:

Regenerating model.

Command: SUBTRACT

Select solids, surfaces, and regions to subtract from ..

(16)

Select objects: 1 found

Select objects: Specify opposite corner: 0 found Select objects: 1 found, 2 total

Select objects: Select solids, surfaces, and regions to subtract ..

Select objects: *Cancel*

Command: *Cancel*

Command: _vscurrent

Command: SU

SUBTRACT Select solids, surfaces, and regions to subtract from ..

Select objects: 1 found (1 duplicate), 1 total Select objects: 1 found, 2 total

Select objects: 1 found (1 duplicate), 1 total Select objects: 1 found (1 duplicate), 1 total Select objects: 1 found (1 duplicate), 1 total Select objects: 1 found (1 duplicate), 1 total Select objects: 1 found, 2 total

Select objects:

No solids, surfaces, or regions selected.

Command: SU

Command: *Cancel*

Command: _vscurrent

Enter an option [2dwireframe/Wireframe/Hidden/Realistic/Conceptual/Shaded/shaded with Edges/shades of Gray/SKetchy/X-ray/Other] <Realistic>: _2d Regenerating model.

(17)

Command: SUBTRACT

Select objects: 1 found, 2 total Select objects:

Select solids, surfaces, and regions to subtract ..

Command: *Cancel*

Command: _vscurrent

Command: *Cancel*

Command: _vscurrent

Command: SUBTRACT

Select objects: No solids, surfaces, or regions selected.

Command:

Command: *Cancel*

Command: SU

Select objects: 1 found Select objects:

Command: *Cancel*

(18)

Command: *Cancel*

Command: _vscurrent

Command:

Command: *Cancel*

Command: '_-view Enter an option [?/Delete/Orthographic/Restore/Save/sEttings/Window]: _top Command:

Specify other corner point or [Area/Dimensions/Rotation]: 270 Command: OFFSET

Current settings: Erase source=No Layer=Source OFFSETGAPTYPE=0

Specify offset distance or [Through/Erase/Layer] <30.0000>: Specify second point:

Command: O OFFSET

Current settings: Erase source=No Layer=Source OFFSETGAPTYPE=0 Specify offset distance or [Through/Erase/Layer] <30.0000>: 30 Select object to offset or [Exit/Undo] <Exit>:

Resuming OFFSET command.

(19)

Current wire frame density: ISOLINES=4, Closed profiles creation mode = Solid Select objects to extrude or [MOde]: Specify opposite corner: 2 found

Select objects to extrude or [MOde]:

Specify height of extrusion or [Direction/Path/Taper angle/Expression]: 390 Command: *Cancel*

Command: *Cancel*

Command: _vscurrent

Command: SU

Command: *Cancel*

Command: _vscurrent

Command:

Command: M MOVE

Command:

(20)

Command: M MOVE

Select objects: Specify opposite corner: 5 found Select objects:

Resuming MOVE command.

Too many objects selected for INTERSECT Command:

Command:

Command: _QSAVE Command:

Command:

Command: _QSAVE Command: _vscurrent

Command:

Command: SU

Select objects:

(21)

Command: *Cancel*

Command: _vscurrent

Command: *Cancel*

Command: _vscurrent

Command: *Cancel*

Command: _vscurrent

Command: *Cancel*

Command: _vscurrent

(22)

Command: *Cancel*

Command: _vscurrent

Current wire frame density: ISOLINES=4, Closed profiles creation mode = Solid

Select objects to extrude or [MOde]: 1 found

Select objects to extrude or [MOde]: *Cancel*

Command: *Cancel*

Automatic save to C:\Users\CINDYA~1\AppData\Local\Temp\Drawing1_TPS_1_12392- cindy_1_29790_8c657024.sv$ ...

Command:

Command: *Cancel*

Command: _vscurrent

Command: *Cancel*

Command: _vscurrent

(23)

Command: *Cancel*

Specify height of extrusion or [Direction/Path/Taper angle/Expression] <-85.8443>: *Cancel*

Command: M MOVE

Select objects:

Specify second point or <use first point as displacement>: *Cancel*

(24)

Command:

Command: _rectang

Command:

Command: EXPLODE 1 found

Command:

Command: O OFFSET

Current settings: Erase source=No Layer=Source OFFSETGAPTYPE=0 Specify offset distance or [Through/Erase/Layer] <Through>: 10

Cannot offset that object.

Select object to offset or [Exit/Undo] <Exit>: Regenerating model.

(25)

Select object to offset or [Exit/Undo] <Exit>: Regenerating model.

Select object to offset or [Exit/Undo] <Exit>: _u Regenerating model.

Regenerating model.

Command: *Cancel*

Command: _vscurrent

(26)

Command:

Command: _u INTELLIZOOM '.3DPAN2 INTELLIZOOM Command: _u VSCURRENT Regenerating model.

Specify height of extrusion or [Direction/Path/Taper angle/Expression] <-85.8443>:

Command: SU

Select objects: Regenerating model.

Resuming SUBTRACT command.

Select objects: Regenerating model.

Resuming SUBTRACT command.

(27)

Command: *Cancel*

Command: _vscurrent

Command:

Command: _u

Command: _u GROUP INTELLIZOOM menu item Command:

Command:

Command: *Cancel*

Command:

Command: _.undo Current settings: Auto = On, Control = All, Combine = Yes, Layer = Yes

(28)

Enter the number of operations to undo or [Auto/Control/BEgin/End/Mark/Back] <1>: 1 GROUP menu item menu item menu item menu item menu item

Command:

Enter the number of operations to undo or [Auto/Control/BEgin/End/Mark/Back] <1>: 1 VSCURRENT Regenerating model.

Command:

Enter the number of operations to undo or [Auto/Control/BEgin/End/Mark/Back] <1>: 1 SUBTRACT Regenerating model.

Command:

Enter the number of operations to undo or [Auto/Control/BEgin/End/Mark/Back] <1>: 1 SUBTRACT Command:

Command:

Enter the number of operations to undo or [Auto/Control/BEgin/End/Mark/Back] <1>: 1 EXTRUDE Command:

Command:

Command: _.undo Current settings: Auto = On, Control = All, Combine = Yes, Layer = Yes Enter the number of operations to undo or [Auto/Control/BEgin/End/Mark/Back] <1>: 1 INTELLIZOOM

Command:

Enter the number of operations to undo or [Auto/Control/BEgin/End/Mark/Back] <1>: 1 OFFSET Command:

(29)

Command:

Command: _.undo Current settings: Auto = On, Control = All, Combine = Yes, Layer = Yes Enter the number of operations to undo or [Auto/Control/BEgin/End/Mark/Back] <1>: 1 INTELLIZOOM

Command:

Enter the number of operations to undo or [Auto/Control/BEgin/End/Mark/Back] <1>: 1 EXPLODE Command:

Command:

Enter the number of operations to undo or [Auto/Control/BEgin/End/Mark/Back] <1>: 1 RECTANG GROUP

Command:

Command: _.undo Current settings: Auto = On, Control = All, Combine = Yes, Layer = Yes Enter the number of operations to undo or [Auto/Control/BEgin/End/Mark/Back] <1>: 1 MOVE Command:

Command:

Enter the number of operations to undo or [Auto/Control/BEgin/End/Mark/Back] <1>: 1 EXTRUDE Command:

Command:

Enter the number of operations to undo or [Auto/Control/BEgin/End/Mark/Back] <1>: 1 RECTANG Command:

Command:

Enter the number of operations to undo or [Auto/Control/BEgin/End/Mark/Back] <1>: 1 RECTANG Command:

Regenerating model.

(30)

Select objects to extrude or [MOde]: *Cancel*

Command: *Cancel*

Command: _vscurrent

Command: *Cancel*

Command: _vscurrent

Command: L LINE

Specify next point or [Undo]:

(31)

Specify next point or [Close/Undo]:

Command: J JOIN

Select source object or multiple objects to join at once: 1 found Select objects to join: 1 found, 2 total

Select objects to join: 1 found, 3 total Select objects to join: 1 found, 4 total Select objects to join:

4 objects converted to 1 3D polyline Command:

Command: *Cancel*

Specify height of extrusion or [Direction/Path/Taper angle/Expression] <126.0583>:

Command: SU

(32)

Select objects:

Command: *Cancel*

Automatic save to C:\Users\CINDYA~1\AppData\Local\Temp\Drawing1_TPS_1_12392- cindy_1_29790_8c657024.sv$ ...

Command:

Command: *Cancel*

Command: _vscurrent

Command: *Cancel*

Command: _vscurrent

Enter an option [2dwireframe/Wireframe/Hidden/Realistic/Conceptual/Shaded/shaded with Edges/shades of Gray/SKetchy/X-ray/Other] <Realistic>: _r

Command: *Cancel*

Command: _vscurrent

Command: *Cancel*

(33)

Command: _u VSCURRENT Command: _u VSCURRENT

Command: _u VSCURRENT Regenerating model.

Command: _u SUBTRACT

Command: *Cancel*

Command: _vscurrent

Command: SUBTRACT

Select objects:

Command:

Command: _QSAVE Loading Modeler DLLs.

(34)

AutoCAD menu utilities loaded.*Cancel*

Command:

Command: *Cancel*

Command: <Switching to: Layout1>

Regenerating layout.

Command: -VPORTS

Specify corner of viewport or

[ON/OFF/Fit/Shadeplot/Lock/NEw/NAmed/Object/Polygonal/Restore/LAyer/2/3/4] <Fit>:

Specify opposite corner:

Command: *Cancel*

(35)

Command: CO COPY

Select objects:

Command:

STRETCH

Command: *Cancel*

Command: CO COPY

Select objects:

Command:

** STRETCH **

Command:

(36)

STRETCH

Command:

** STRETCH **

Command:

** STRETCH **

Command:

** STRETCH **

Command: *Cancel*

Command: CO COPY

Select objects:

Command:

STRETCH

(37)

Command: *Cancel*

Command: CO COPY

Select objects:

Command:

Command: *Cancel*

Command: CO COPY

Select objects: Specify opposite corner: 2 found

Select objects:

Command:

Command: Z ZOOM

Specify corner of window, enter a scale factor (nX or nXP), or

(38)

[All/Center/Dynamic/Extents/Previous/Scale/Window/Object] <real time>:

Specify opposite corner:

Command:

Command: *Cancel*

Command: _.MSPACE Command:

Command:

Command: *Cancel*

Command: _vscurrent

Enter an option [2dwireframe/Wireframe/Hidden/Realistic/Conceptual/Shaded/shaded with Edges/shades of Gray/SKetchy/X-ray/Other] <Realistic>: _h

Command: `*Cancel*

(39)

Command:

Command: '_-view Enter an option [?/Delete/Orthographic/Restore/Save/sEttings/Window]: _top Command:

Command:

Command: '_perspective

Enter new value for PERSPECTIVE <0>: 0 Command:

Command: '_.zoom

[All/Center/Dynamic/Extents/Previous/Scale/Window/Object] <real time>: _e Command:

Command:

(40)

Command:

Command: '_.zoom

[All/Center/Dynamic/Extents/Previous/Scale/Window/Object] <real time>: _e Command:

Command: *Cancel*

Command: _vscurrent

Command:

Command: *Cancel*

Command: _.PSPACE

Command: _.MSPACE Command:

Command:

(41)

Command:

Automatic save to C:\Users\CINDYA~1\AppData\Local\Temp\Drawing1_TPS_1_12392- cindy_1_29790_4b7f4889.sv$ ...

Command:

Command: *Cancel*

Command: _vscurrent

Command: ``*Cancel*

Enter new value for PERSPECTIVE <0>: 0 Command:

Command:

(42)

Command:

Command: *Cancel*

Command: _vscurrent

Enter new value for PERSPECTIVE <0>: 0 Command: _.PSPACE

Command: _.MSPACE

Command: '_-view Enter an option [?/Delete/Orthographic/Restore/Save/sEttings/Window]: _front Command:

Command:

Command: '_-view Enter an option [?/Delete/Orthographic/Restore/Save/sEttings/Window]: _left Command:

Command:

Command: '_-view Enter an option [?/Delete/Orthographic/Restore/Save/sEttings/Window]:

_bottom

(43)

Command:

Command: _.PSPACE Command: *Cancel*

Command: *Cancel*

Command: <Switching to: Layout2>

Regenerating layout.

Command:

Command: _IMPORT Command:

Automatic save to C:\Users\CINDYA~1\AppData\Local\Temp\Drawing1_TPS_1_12392- cindy_1_29790_4b7f4889.sv$ ...

Command:

Command: _open Command:

Command:

Command: _pasteclip Specify insertion point: *Cancel*

(44)

Command:

Command: *Cancel*

Command: <Switching to: Model>

Restoring cached viewports.

Regenerating model.

AutoCAD menu utilities loaded.

Command:

MOVE 1 found

Command: *Cancel*

(45)

Command: <Switching to: 4 Bagian>

Restoring cached viewports - Regenerating layout.

Command: _.MSPACE Command: *Cancel*

Command: *Cancel*

Regenerating 4 modified entities.

Command: *Cancel*

Command: DIMLIN DIMLINEAR

Specify first extension line origin or <select object>:

Checking 703 intersections...

Specify second extension line origin:

Specify dimension line location or

[Mtext/Text/Angle/Horizontal/Vertical/Rotated]: *Cancel*

(46)

[Mtext/Text/Angle/Horizontal/Vertical/Rotated]:

Dimension text = 223.34 Command: DIMLINEAR

Dimension text = 540 Command: *Cancel*

Command: *Cancel*

Command:

Command: M

(47)

MOVE 1 found

Dimension disassociated.

Command: *Cancel*

Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: _.PSPACE Command: *Cancel*

Command: *Cancel*

(48)

Automatic save to

C:\Users\CINDYA~1\AppData\Local\Temp\Cindy_TPS_J0413221141_1_29790_73ee1e26.sv$ ...

Command:

Command: *Cancel*

Command: '_-view Enter an option [?/Delete/Orthographic/Restore/Save/sEttings/Window]: _top Regenerating model.

Command: '-VIEW

Enter an option [?/Delete/Orthographic/Restore/Save/sEttings/Window]: *Cancel*

Too many objects selected for INTERSECT

Non-associative dimension created.

[Mtext/Text/Angle/Horizontal/Vertical/Rotated]: *Cancel*

(49)

Dimension text = 1749.09 Command: M

MOVE

Select objects:

Command: *Cancel*

(50)

Command: M MOVE

Select objects:

Command:

Command: _TEXTEDIT

Current settings: Edit mode = Multiple

Select an annotation object or [Undo/Mode]: *Cancel*

Command:

Press ESC or ENTER to exit, or right-click to display shortcut menu.

Dimension text = 510

(51)

Command: *Cancel*

Command: M MOVE

Select objects:

Command: *Cancel*

Command: '_-view Enter an option [?/Delete/Orthographic/Restore/Save/sEttings/Window]: _left Regenerating model.

Command:

Command: DIMLINEAR

Dimension text = 383.45 Command:

Command:

(52)

Command: _TEXTEDIT

Current settings: Edit mode = Multiple

Select an annotation object or [Undo/Mode]: *Cancel*

Command: M MOVE

Select objects:

Command: *Cancel*

Command: '_-view Enter an option [?/Delete/Orthographic/Restore/Save/sEttings/Window]: _front Regenerating model.

Command:

(53)

Command:

STRETCH

Specify stretch point or [Base point/Copy/Undo/eXit]:*Cancel*

Command: *Cancel*

Command:

Dimension text = 340 Command:

Command: .ERASE

Dimension text = 575.96

(54)

Specify second extension line origin: *Cancel*

Command: DIMLINEAR

Dimension text = 330 Command:

Command: *Cancel*

Command:

Command: _QSAVE

(55)

Command:

Command: _PDFIMPORT

Select PDF underlay or [File] <File>: *Cancel*

Command:

Command: _copyclip 1 found

Command:

Command: _pasteclip Specify insertion point:

Command:

Command: _mtedit Command:

Command:

Command: *Cancel*

Command:

(56)

Command: _PDFIMPORT

Select PDF underlay or [File] <File>: *Cancel*

Command:

Command: _SAVEAS Command: PLOT

Effective plotting area: 297.00 wide by 419.99 high Effective plotting area: 134.96 wide by 144.95 high Effective plotting area: 134.96 wide by 144.95 high Effective plotting area: 134.92 wide by 144.95 high Effective plotting area: 134.92 wide by 144.95 high

Plotting viewport 1.

Command: PL PLINE

Specify start point: *Cancel*

Command: PLOT

Command:

(57)

Command: IMAGEFRAME

Enter new value for IMAGEFRAME <1>: 0 Regenerating layout.

Command: PLOT

Command: *Cancel*

Regenerating model - caching viewports.