50
DAFTAR PUSTAKA
Angela, R. and Pratapa, S. (2012) ‘Sintesis MgTiO 3 dengan Variasi Temperatur Kalsinasi Menggunakan Metode Pencampuran Larutan’, Jurnal Sains Dan Seni Its, 1(1), pp. 73–75.
Angreni, W. and Yusibani, E. (2018) ‘METODE SOL GEL MgTiO 3 THIN FILMS SYNTHESIS BY SOL GEL METHOD’, 7(2), pp. 2–3.
Ardeansyah, D. I. and Ermawati, F. U. (2019) ‘ANALISIS RIETVELD SERBUK FeTiO3 HASIL PREPARASI DENGAN METODE PENCAMPURAN LARUTAN’, Jurnal Inovasi Fisika Indonesia, 08(02), pp. 44–49.
Awaluddin, Mahyudin, A. and Ahda, S. (2015) ‘PENGARUH PENAMBAHAN BAHAN DOPAN Ta2O5 PADA BAHAN PIEZOELEKTRIK RAMAH LINGKUNGAN (K0,5Na0,5)0,96Li0,04NbO3 DENGAN MENGGUNAKAN SINTESIS METODE MOLTEN SALT’, 4(2), pp. 136–143.
Beiser, A. (2003) ‘Concepts of Modern Physics Sixth Edition’, Mc Graw Hill, 33(8), p. 667.
Brown, G. E. (1997) ‘Ti K -edge XANES studies of Ti coordination and disorder in oxide compounds : Comparison between theory and experiment’, 56(4), pp. 1809–
1819.
Cai, Z. et al. (2011) ‘Preparation and characterization of Zn0.9Mg 0.1TiO3via electrospinning’, Dalton Transactions, 40(33), pp. 8335–8339. doi:
10.1039/c1dt10737b.
Ermawati, F. U., Suasmoro, S. and Pratapa, S. (2015) ‘A Simple Dissolved Metals Mixing Route to Prepare Nanostructured Mg0.8Zn0.2TiO3 Solid Solution’, Advanced Materials Research, 1112, pp. 47–52. doi: 10.4028/www.scientific.net/amr.1112.47.
Fayrus, M. et al. (2020) ‘Sintesis Komposit Titania Silika Dengan Prpses Sol Gel’, Journal of Chemical and Process Engineering, 01(01), pp. 36–40.
51 Fernando, T., Ridwan and dkk (2013) ‘Dye Sensitized Solar Cells ( DSSC ) Berbasis Nanopori TiO 2 Menggunakan Antosianin dari Berbagai Sumber Alami’, Semirata FMIPA Universitas Lampung, pp. 155–162.
Ferri, E. A. V et al. (2009) ‘Photoluminescence behavior in MgTiO 3 powders with vacancy / distorted clusters and octahedral tilting’, 117, pp. 192–198. doi:
10.1016/j.matchemphys.2009.05.042.
Fisika, B., Anam, C. and Atom, L. F. (2007) ‘Analisis Gugus Fungsi Pada Sampel Uji, Bensin Dan Spiritus Menggunakan Metode Spektroskopi Ftir’, Berkala Fisika, 10(2), pp. 79-85–85.
Fonseca, F. P. L. R. O. C., Steininger, J. G. R. and Prescher, S. J. C. (2018) ‘Ti K-edge XANES study on the coordination number and oxidation state of Titanium in pyroxene , olivine , armalcolite , ilmenite , and silicate glass during mare basalt petrogenesis’, Contributions to Mineralogy and Petrology, 173(12), pp. 1–17. doi: 10.1007/s00410- 018-1533-7.
Fridawati, M. (2008) ‘Crystal Structure Analysis of Aluminium ( Al ) Thin Film With the X-Rays Diffraction Metode’, Jurusan Fisika Fakultas Sains dan Teknologi Universitas Sanata Dharma., pp. 1–58.
Gawelda, W. (2006) ‘Time-Resolved X-Ray Absorption Spectroscopy of Transition Metal Complexes’, Spectrum, 3673(15), pp. 4770–8. Available at:
http://library.epfl.ch/en/theses/?nr=3673.
Guo, W. et al. (2011) ‘Effect of N dopant amount on the performance of dye-sensitized solar cells based on N-Doped TiO2 electrodes’, Journal of Physical Chemistry C, 115(43), pp. 21494–21499. doi: 10.1021/jp2057496.
Hardeli et al. (2013) ‘Dye Sensitized Solar Cells ( DSSC ) Berbasis Nanopori TiO2 Menggunakan Antosianin dari Berbagai Sumber Alami’, Semirata FMIPA Universitas Lampung, pp. 155–162.
Henderson, G. S., Groot, F. M. F. De and Moulton, B. J. A. (2014) ‘X-ray Absorption
52 Near-Edge Structure (XANES) Spectroscopy’, 78, pp. 75–138.
Ishii, N., Okamoto, Y. and Suzuki, Y. (2015) ‘Semiconductor MgTiO3, MgTi2O5 and Mg2TiO4 Double-Oxide Electrodes for Dye-Sensitized Solar Cells’, International Letters of Chemistry, Physics and Astronomy, 46, pp. 9–15. doi:
10.18052/www.scipress.com/ilcpa.46.9.
Jiang, N., Su, D. and Spence, J. C. H. (2007) ‘Determination of Ti coordination from pre-edge peaks in Ti K -edge XANES’, Physical Review B - Condensed Matter and Materials Physics, 76(21), pp. 1–9. doi: 10.1103/PhysRevB.76.214117.
Juliansyah, Ratnawulan and Fauzi, A. (2015) ‘Pengaruh Temperatur Kalsinasi Terhadap Struktur Mineral Granit yang Terdapat di Nagari Surian Kecamatan Pantai Cermin Kabupaten Solok’, Pillar of Physics, 9, pp. 9–16.
Larutan, P. et al. (2013) ‘Kemurnian Tinggi Menggunakan Metode’, 2(1), pp. 3–5.
Liou, Y. C. and Yang, S. L. (2007) ‘Calcium-doped MgTiO3-MgTi2O5 ceramics prepared using a reaction-sintering process’, Materials Science and Engineering B:
Solid-State Materials for Advanced Technology, 142(2–3), pp. 116–120. doi:
10.1016/j.mseb.2007.06.027.
Lisma Dian Kartika, S. S. and Pratapa (2012) ‘Memanfaatkan Kapur Alam dan Metode Pencampuran Larutan’, Jurnal Sains Dan Seni Its, 1(1), pp. 1–4.
Ludin, N. A. et al. (2014) ‘Review on the development of natural dye photosensitizer for dye-sensitized solar cells’, Renewable and Sustainable Energy Reviews, 31, pp.
386–396. doi: 10.1016/j.rser.2013.12.001.
Muhammad AS Hikam (2015) Ketahanan energi indonesia tantangan dan harapan.
Naseska, M. (2016) ‘Seminar I a-1. year, II. cycle FOURIER TRANSFORM INFRARED SPECTROSCOPY’, Fourier Transform Infrared Spectroscopy, 1(1), pp.
1–6. Available at: http://mafija.fmf.uni-
lj.si/seminar/files/2015_2016/FTIR_final_Naseska_Mimoza.pdf.
53 Nasional, P. S. (2014) ‘~ 17, koefisien temperatur τ’, (November), pp. 7–13.
Poo-arporn, Y., Chirawatkul, P. and Saengsui, W. (2012) ‘q2xafs workshop Time- resolved XAS ( Bonn-SUT-SLRI ) beamline at SLRI’, pp. 937–943. doi:
10.1107/S090904951204109X.
Pqrs, N. O. (2007) ‘2 # 4 $ 2 % 4 &’ *Op01Q:R •’, 4(4), pp. 1–5.
Pratapa, S. et al. (2014) ‘A simple dissolved metals mixing method to produce high- purity MgTiO 3 nanocrystals’, AIP Conference Proceedings, 1586, pp. 39–42. doi:
10.1063/1.4866726.
Pujilaksono, B. (2017) ‘Solid State Chemistry Ilmu Dasar Berdaya Guna Dan Aplikatif’, Jurnal Teknosains, 5(1), p. 71. doi: 10.22146/teknosains.24170.
Al Qibtiya, M., Muliani, L. and Hidayat, J. (2016) ‘Karakteristik Pasta TiO2 Suhu Rendah untuk Aplikasi Dye Sensitized Solar Cell (DSSC)’, Jurnal Elektronika dan Telekomunikasi, 14(1), p. 24. doi: 10.14203/jet.v14.24-28.
Sr, C. A. A. et al. (2018) ‘Determination of Ferro- and Antiferroelectricity Using the Temperature Dependence of the Pre-Edge Features in the XANES Spectra : XANES Study of Tetragonal and’, 1800050, pp. 1–8. doi: 10.1002/pssb.201800050.
Suharta, W. G. et al. (2013) ‘Structural and superconducting aspects in REBa2Cu 3O7- δ (RE = Nd, Gd, Eu) superconductors prepared by wet-mixing method and varying sintering temperature’, AIP Conference Proceedings, 1555, pp. 62–66. doi:
10.1063/1.4820994.
Suseno, J. E. and Firdausi, K. S. (2008) ‘Rancang Bangun Spektroskopi FTIR (Fourier Transform Infrared) untuk Penentuan Kualitas Susu Sapi’, Berkala Fisika, 11(1), pp.
23-28–28.
Suzuki, Y. and Shinoda, Y. (2011) ‘Magnesium dititanate (MgTi2O5) with pseudobrookite structure: A review’, Science and Technology of Advanced Materials, 12(3). doi: 10.1088/1468-6996/12/3/034301.
54 Tio, K. et al. (2018) ‘Sintesis dan Karakterisasi TiO2(nanorod)-SiO2 dan Aplikasinya Dalam Cat Akrilik’, Indonesian Journal of Chemical Science, 7(1), pp. 56–63.
Wang, W. et al. (2016) ‘Enhanced performance of dye-sensitized solar cells based on TiO2/MnTiO3/MgTiO3 composite photoanode’, Journal of Alloys and Compounds, 657, pp. 53–58. doi: 10.1016/j.jallcom.2015.09.246.
Zharvan, V. (2014) ‘Identifikasi Fasa Mg0 , 8Zn0 , 2TiO3 pada Variasi Temperatur Kalsinasi dengan Identifikasi Fasa Zn 0 , 2 Mg 0 , 8 TiO 3 ( ZMT ) pada Variasi Temperatur Kalsinasi dengan Metode Pencampuran Larutan’, (June 2015), pp. 2–6.
doi: 10.13140/RG.2.1.1860.6240.
Zhou, X., Yuan, Æ. Y. and Xiang, Æ. L. (2007) ‘Synthesis of MgTiO 3 by solid state reaction and characteristics with addition’, pp. 6628–6632. doi: 10.1007/s10853-007- 1510-4.
Zn, S. et al. (2012) ‘Chairatul Umamah dan Suminar Pratapa Jurusan Fisiska, FMIPA, Institut Teknologi Sepuluh Nopember (ITS) Jl. Arief Rahman Hakim, Surabaya 60111’, 1(1), pp. 60–62.
Zulkifili, A. N. B. et al. (2015) ‘The Basic Research on the Dye-Sensitized Solar Cells (DSSC)’, Journal of Clean Energy Technologies, 3(5), pp. 382–387. doi:
10.7763/jocet.2015.v3.228.
