• Tidak ada hasil yang ditemukan

Identitas Jurnal Ilmiah : a. Nama Jurnal : International Journal of Innovative Research in Advanced Engineering (IJIRAE)

N/A
N/A
Protected

Academic year: 2023

Membagikan "Identitas Jurnal Ilmiah : a. Nama Jurnal : International Journal of Innovative Research in Advanced Engineering (IJIRAE) "

Copied!
14
0
0

Teks penuh

(1)

LEMBAR

HASIL PENILAIAN SEJAWAT SEBIDANG ATAU PEER REVIEW KARYA ILMIAH : JURNAL ILMIAH

Judul Jurnal Ilmiah (Artikel) : Distance Measurement with A Stereo Camera Nama/ Jumlah Penulis : Kusworo Adi dan Catur Edi Widodo/ 2 orang Status Pengusul : Penulis ke-1

Identitas Jurnal Ilmiah : a. Nama Jurnal : International Journal of Innovative Research in Advanced Engineering (IJIRAE)

b. Nomor ISSN : 2349-2163

c. Vol, No., Bln Thn : 11, 4, November 2017

d. Penerbit : AM Publications Group Journals

e. DOI artikel (jika ada) : http://doi.org/10.26562/IJIRAE.2017.NVAE10087 f. Alamat web jurnal : https://www.ijirae.com/volume-11-issue-054

Alamat Artikel : https://www.ijirae.com/volumes/Vol4/iss11/05.NVAE1 0087.pdf

g. Terindex : SJIF: Innospace, Morocco (2016): 3.916 | PIF: 2.469 | Jour Info: 4.085 | ISRAJIF (2016): 3.715 |

Indexcopernicus: (ICV 2015): 47.91

Kategori Publikasi Jurnal Ilmiah : √ Jurnal Ilmiah Internasional

(beri pada kategori yang tepat) Jurnal Ilmiah Nasional Terakreditasi Jurnal Ilmiah Nasional Tidak Terakreditasi Hasil Penilaian Peer Review :

Komponen Yang Dinilai Nilai Reviewer

Nilai Rata-rata Reviewer 1 Reviewer 2

a. Kelengkapan unsur isi jurnal (10%) 1,90 1,50 1,70

b. Ruang lingkup dan kedalaman pembahasan (30%)

5,60 5,90 5,75

c. Kecukupan dan kemutahiran

data/informasi dan metodologi (30%)

5,60 5,80 5,70

d. Kelengkapan unsur dan kualitas terbitan/jurnal (30%)

5,80 5,50 5,65

Total = (100%) 18,90 18,70 18,80

Semarang, 8 Mei 2020 Reviewer 1

Prof. Dr. Muhammad Nur, DEA NIP. 195711261990011001

Unit Kerja : Departemen Fisika - FSM UNDIP

Reviewer 2

Prof. Dr. Heri Sutanto, SSi, MSi NIP. 197502151998021001

Unit Kerja : Departemen Fisika - FSM UNDIP

(2)

LEMBAR

HASIL PENILAIAN SEJAWAT SEBIDANG ATAU PEER REVIEW KARYA ILMIAH : JURNAL ILMIAH

Judul Jurnal Ilmiah (Artikel) : Distance Measurement with A Stereo Camera Nama/ Jumlah Penulis : Kusworo Adi dan Catur Edi Widodo/ 2 orang Status Pengusul : Penulis ke-1

Identitas Jurnal Ilmiah : a. Nama Jurnal : International Journal of Innovative Research in Advanced Engineering (IJIRAE)

b. Nomor ISSN : 2349-2163

c. Vol, No., Bln Thn : 11, 4, November 2017

d. Penerbit : AM Publications Group Journals

e. DOI artikel (jika ada) : http://doi.org/10.26562/IJIRAE.2017.NVAE10087 f. Alamat web jurnal : https://www.ijirae.com/volume-11-issue-054

Alamat Artikel : https://www.ijirae.com/volumes/Vol4/iss11/05.NVAE1 0087.pdf

g. Terindex : SJIF: Innospace, Morocco (2016): 3.916 | PIF: 2.469 | Jour Info: 4.085 | ISRAJIF (2016): 3.715 |

Indexcopernicus: (ICV 2015): 47.91 Kategori Publikasi Jurnal Ilmiah : √ Jurnal Ilmiah Internasional

(beri pada kategori yang tepat) Jurnal Ilmiah Nasional Terakreditasi Jurnal Ilmiah Nasional Tidak Terakreditasi Hasil Penilaian Peer Review :

Komponen Yang Dinilai

Nilai Maksimal Jurnal Ilmiah

Nilai Akhir Yang Diperoleh Internasional

Nasional Terakreditasi

Nasional Tidak Terakreditasi

a. Kelengkapan unsur isi jurnal (10%) 2,00 1,90

b. Ruang lingkup dan kedalaman pembahasan (30%)

6,00 5,60

c. Kecukupan dan kemutahiran

data/informasi dan metodologi (30%)

6,00 5,60

d. Kelengkapan unsur dan kualitas terbitan/jurnal (30%)

6,00 5,80

Total = (100%) 20,00 18,90

Nilai Pengusul =

Catatan Penilaian artikel oleh Reviewer : 1. Kelengkapan unsur isi jurnal:

Penulisan Artikel ini telah sesuai dengan format IJIRAE. Latar belakang tak terungkap dengan jelas. Kebaruan dari artikel ini juga belum diutarakan dengan ekspilsit

2. Ruang lingkup dan kedalaman pembahasan:

Arikel ditulis dengan ruang lingkup yang sempit. Pembahasan masih menunjukan hasil rekontruksi, belum terdapat pembahasan/ diskusi yang membandingkan dengan hasil peneliti lain.

3. Kecukupan dan kemutakhiran data/informasi dan metodologi:

Referensi kurang mutakhi. Metoda standard dan bisa direflikasi oleh ahli sebidang. Data mini dan pembahasan masih sangat kurang.

4. Kelengkapan unsur dan kualitas terbitan:

Penerbitan oleh AM Publications Group Journals tidak begitu bagus. Jurnal dikatagorikan pada jurnal Internasional dengan nilai maximum 20

Semarang, 8 Mei 2020 Reviewer 1

Prof. Dr. Muhammad Nur, DEA NIP. 195711261990011001

Unit Kerja : Departemen Fisika - FSM UNDIP

(3)

LEMBAR

HASIL PENILAIAN SEJAWAT SEBIDANG ATAU PEER REVIEW KARYA ILMIAH : JURNAL ILMIAH

Judul Jurnal Ilmiah (Artikel) : Distance Measurement with A Stereo Camera Nama/ Jumlah Penulis : Kusworo Adi dan Catur Edi Widodo/ 2 orang Status Pengusul : Penulis ke-1

Identitas Jurnal Ilmiah : a. Nama Jurnal : International Journal of Innovative Research in Advanced Engineering (IJIRAE)

b. Nomor ISSN : 2349-2163

c. Vol, No., Bln Thn : 11, 4, November 2017

d. Penerbit : AM Publications Group Journals

e. DOI artikel (jika ada) : http://doi.org/10.26562/IJIRAE.2017.NVAE10087 f. Alamat web jurnal : https://www.ijirae.com/volume-11-issue-054

Alamat Artikel : https://www.ijirae.com/volumes/Vol4/iss11/05.NVAE1 0087.pdf

g. Terindex : SJIF: Innospace, Morocco (2016): 3.916 | PIF: 2.469 | Jour Info: 4.085 | ISRAJIF (2016): 3.715 |

Indexcopernicus: (ICV 2015): 47.91 Kategori Publikasi Jurnal Ilmiah : √ Jurnal Ilmiah Internasional

(beri pada kategori yang tepat) Jurnal Ilmiah Nasional Terakreditasi Jurnal Ilmiah Nasional Tidak Terakreditasi

Hasil Penilaian Peer Review :

Komponen Yang Dinilai

Nilai Maksimal Jurnal Ilmiah

Nilai Akhir Yang Diperoleh Internasional

Nasional Terakreditasi

Nasional Tidak Terakreditasi

a. Kelengkapan unsur isi jurnal (10%) 2,00 1,50

b. Ruang lingkup dan kedalaman pembahasan (30%)

6,00 5,90

c. Kecukupan dan kemutahiran

data/informasi dan metodologi (30%)

6,00 5,80

d. Kelengkapan unsur dan kualitas terbitan/jurnal (30%)

6,00 5,50

Total = (100%) 20,00 18,70

Nilai Pengusul =

Catatan Penilaian artikel oleh Reviewer : 1. Kelengkapan unsur isi jurnal:

Artikel telah ditulis secara lengkap mulai dari judul, abstrak, pendahuluan hingga referensi. Penulisan referensi tidak sesuai template International Journal of Innovative Research in Advanced Engineering. Scope jurnal relevan dengan artikel yang ditulis.

2. Ruang lingkup dan kedalaman pembahasan:

Ruang lingkup dan kedalaman pembahasan baik dan mendalam. Paper belum mengkaitkan atau membandingkan hasil dari peneliti lain. Abstrak dan kesimpulan sudah sinkron

3. Kecukupan dan kemutakhiran data/informasi dan metodologi:

Data penelitian yang diperoleh memadai. Hasil penelitian sudah sesuai dengan metodologi riset yang dilakukan.

Artikel disusun dengan refernsi yang sangat minim hanya 5 referensi total.

4. Kelengkapan unsur dan kualitas terbitan:

Secara umum kelengkapan unsur artikel lengkap. Kualitas penerbit AM Publications Group Journals kurang baik.

Proses final check pada penerbit kurang baik ditandai penulisan referensi tidak sesuai template jurnalnya.

Semarang, 6 Mei 2020 Reviewer 2

Prof. Dr. Heri Sutanto, SSi, MSi NIP. 197502151998021001

Unit Kerja : Departemen Fisika - FSM UNDIP

(4)

22/5/2020 IJIRAE

https://ijirae.com/ 1/2

0Search

Home Aime and Scope Indexing Call for Paper Instruction for Authors Online Submission Editorial Board Board of Referees (BoR) Archives

Ethics & Policies Publication Ethics and Publication Malpractice Statement

Article Withdrawal Policy Plagiarism Policy Double Blind Peer Review Policy

Copyright, Grants and Ownership Declaration Open Access Overview FAQ

Contact

Downloads

Paper Template Copyright Form

Recent Issues

Volume 7, Issue 04 Volume 7, Issue 03 Volume 7, Issue 02 Volume 7, Issue 01 Volume 6, Issue 12 Volume 6, Issue 11 Volume 6, Issue 10 Volume 6, Issue 09 Volume 6, Issue 08 Volume 6, Issue 07 Volume 6, Issue 06 Volume 6, Issue 05 Volume 6, Issue 04 Volume 6, Issue 03

International Journal of Innovative Research in Advanced Engineering (IJIRAE) is having ISSN 2349‐

2163 (Online), monthly international journal for publication of new ideas founded by academicians, educationist, engineers and corporate people. The research results and fundamental advancement are all  aspects  of  Innovative  Research  in  Advanced  Engineering  &  Technology  and  various  engineering disciplines,  etc.  IJIRAE  is  a  scholarly  open  access,  Double  Blind  Peer  Review  Journal  which  helps  to academic person as well as student community. IJIRAE provides the academic community and industry for the submission of original research and applications related to Various Engineering discipline and Advanced Technologies by AM Publications (AMP) Hosur (Tamil Nadu), India since year 2014 It is academic, online, scholarly open access, Double Blind peer reviewed international journal. It aims to publish original, theoretical and practical advances in Computer Science & Engineering, Information Technology,  Electrical  and  Electronics  Engineering,  Electronics  and  Telecommunication,  Mechanical Engineering,  Civil  Engineering,  Textile  Engineering  and  all  interdisciplinary  streams  of  Engineering Sciences. All submitted papers will be reviewed by the board of committee of IJIRAE.

The  aim  of  the  journal  is  a  scholarly  open  access,  Double  blind  Peer‐reviewed,  interdisciplinary, monthly and full refereed journal focusing on theories, methods and applications in Engineering and

Technology.  It  covers  all  areas  of  Engineering  and  Technology,  publishing  refereed  original  research  articles  and  technical  notes.  All submitted articles should report original, previously unpublished research results, experimental or theoretical and will be Double blind peer‐reviewed.  Articles  submitted  to  the  journal  should  meet  these  criteria  and  must  not  be  under  consideration  for  publication elsewhere.  Manuscript  should  follow  the  style  of  the  journal  and  are  subject  to  both  review  and  editing.  To  impart  a  platform  for publishing results and research with a strong empirical component, to create a bridge for signi icant gap between research and practice by promoting  the  publication  of  original,  novel,  industry‐relevant  research,  to  solicit  original  and  unpublished  research  papers,  based  on theoretical or experimental works.

Papers for the regular issues of the journal can be submitted, round the year, electronically at [email protected] after the  inal acceptance of the paper, based upon the detailed review process, the paper will immediately be published online. However, assignment of the paper to a  speci ic  Volume  /  Issue  (see  archive)  of  the  Journal  will  be  taken  up  by  the  Editorial  Board  later;  and  the  author  will  be  intimated accordingly. For Theme Based Special Issues, time bound Special Call for Papers will be announced and the same will be applicable for that speci ic issue only.

Publication Ethics and Publication Malpractice

The  IJIRAE  journal  is  committed  to  upholding  the  highest  standards  of  publication  ethics  and  takes  all  possible  measures  against  any publication malpractices. All authors submitting their works to the IJIRAE journal for publication as original articles that the submitted works  represent  their  author's  contributions  and  have  not  copies  or  plagiarized  in  whole  or  in  part  from  other  works.  The  authors acknowledge that they disclosed all and any actual or potential con licts of interest with their work or partial bene its associated with it. In the same manned, the IJIRAE journal is committed to objective and fair double‐blind peer‐review of the submitted for publication works and  to  prevent  any  actual  or  potential  con lict  of  interest  between  the  editorial  and  review  personnel  and  the  reviewed  material.  Any departures  from  the  above  de ined  rules  should  be  communicated  directly  to  the  Editor‐in‐chief,  who  is  unequivocally  committed  to provide swift resolutions to any such type of issues.

Further  to  the  above,  the  IJIRAE  journal  provides  a  platform  for  the  open  public  discussion  of  the  journal  contents.  To  secure accountability and to encourage sincere professional inputs without incivilities the system is set up require registration and logging for recording of inputs. Some of the website contents will be available without logging but no peer review comments cam be posted on the website without the disclosure of the reviewers identity to the journal editors.

Policy of Screening for plagiarism

Papers submitted to International Journal of IJIRAE will be screened for plagiarism using Crosscheck / iThenticate Plagiarism detection tools. Apart from that we check with Copyscape for plagiarism. IJIRAE will immediately reject the papers leading to plagiarism of self‐

plagiarism.

Salient Features:

Strict Plagiarism Policy

Double Blind Peer reviewed Journal Open access Journal

Reputed Editorial Board Fully Archived Journal High Visibility & Indexing High Impact Factor Journal  

Send your paper at E‐mail: [email protected] Website: www.ijirae.com

ISSN: 2349‐2163 (Online)

Publishing Frequency: 12 Issue per year (Monthly) Published By: AM Publications, INDIA.

First Volume/Issue Publishing Year: 2014 Journal Starting Year: 2014

Review Process: Double Blind

Publication Ethics: COPE’s Best Practice Guidelines Publisher Licence under: Creative Commons By NC ND

AM Publications Group Journals

International Research Journal of Computer Science‐ IRJCS

International Journal of Innovative Research in Information Security‐ IJIRIS International Journal of Innovative Research in Advanced Engineering‐ IJIRAE

Home Aim & Scope Instruction for Authors Editorial Board Archives Ethics & Policies Contact

(5)

22/5/2020 IJIRAE

https://ijirae.com/ 2/2

Powered by Joomla 1.7 Templates designed by webhosting

Volume 6, Issue 02 Volume 6, Issue 01 Volume 5, Issue 12 Volume 5, Issue 11 Volume 5, Issue 10 Volume 5, Issue 09 Volume 5, Issue 08 Volume 5, Issue 07 Volume 5, Issue 06 Volume 5, Issue 05 Volume 5, Issue 04 Volume 5, Issue 03 Volume 5, Issue 02 Volume 5, Issue 01 Much more...

This work is licensed under a Creative Commons Attribution 4.0 International License.

2011 International Journal of Innovative Research in Advanced Engineering (IJIRAE) ‐ International Journal of Innovative Research in Advanced Engineering.

(6)

22/5/2020 IJIRAE­Aime and Scope

https://ijirae.com/aim­scope 1/2

0Search

Home Aime and Scope Indexing Call for Paper Instruction for Authors Online Submission Editorial Board Board of Referees (BoR) Archives

Ethics & Policies Publication Ethics and Publication Malpractice Statement

Article Withdrawal Policy Plagiarism Policy Double Blind Peer Review Policy

Copyright, Grants and Ownership Declaration Open Access Overview FAQ

Contact

Downloads

Paper Template Copyright Form

AIM

The aim of the journal is a scholarly open access, Double blind Peer‐reviewed, interdisciplinary, monthly and full refereed journal focusing on  theories,  methods  and  applications  in  Engineering  and  Technology.  It  covers  all  areas  of  Engineering  and  Technology,  publishing refereed  original  research  articles  and  technical  notes.  All  submitted  articles  should  report  original,  previously  unpublished  research results, experimental or theoretical and will be Double blind peer‐reviewed. Articles submitted to the journal should meet these criteria and must not be under consideration for publication elsewhere. Manuscript should follow the style of the journal and are subject to both review and editing. To impart a platform for publishing results and research with a strong empirical component, to create a bridge for signi�icant gap between research and practice by promoting the publication of original, novel, industry‐relevant research, to solicit original and unpublished research papers, based on theoretical or experimental works.

The aim of the journal is to:

Disseminate original, scienti�ic, theoretical or applied research in the �ield of Engineering and allied �ields.

Create  a  bridge  for  signi�icant  gap  between  research  and  practice  by  promoting  the  publication  of  original,  novel,  industry‐relevant research.

Aqueduct the signi�icant gap between research and practice by promoting the publication of original, novel, industry‐relevant research.

Seek original and unpublished research papers based on theoretical or experimental works for the publication globally.

Solicit original and unpublished research papers, based on theoretical or experimental works.

Publish  original,  theoretical  and  practical  advances  in  Mechanical  Engineering,  Civil  Engineering,  Computer  Science  &  Engineering, Textile  Engineering,  Information  Technology,  Electrical  and  Electronics  Engineering,  Electronics  and  Telecommunication  and  all interdisciplinary streams of Engineering Sciences.

Impart a platform for publishing results and research with a strong empirical component.

Dispense a platform for publishing results and research with a strong empirical component.

  SCOPE

International Journal of Innovative Research in Advanced Engineering (IJIRAE) covers all topics of all engineering branches. Some of them are Computer Science & Engineering, Information Technology, Electronics & Communication, Electrical and Electronics, Electronics and Telecommunication,  Civil  Engineering,  Mechanical  Engineering,  Textile  Engineering  and  all  interdisciplinary  streams  of  Engineering Sciences. The main topic includes but not limited to:

Computer Science & Engineering:

Computer Science & Engineering | Information Technology | Software Engineering | Web Technology Engineering | Network Engineering | Information  security  Engineering  |  Web  Technology  Engineering  |  Soft‐computing  and  Engineering  Education  |  Software  Engineering

|Data Mining and Bioinformatics Mechanical Engineering:

Mechanical  Engineering  |  Machine  Design  |  Production  Engineering  &  Fusion  Technology  |  Welding  Engineering  |  Manufacturing Engineering | Solid Mechanics | Head Transfer | Metallurgy | CAD/CAM | Power & Process Engineering | Structural & Machine Design | Thermal Engineering & Fluids Engineering | Computational Mechanics | Welding Engineering | Thermal Engineering & Fluids Engineering

|Environmental Engineering | Environmental Geo‐informatics | Exploration & drilling | Forensic Engineering | Fracturing technology | Gas Engineering  |Geo  Technical  Engineering  |  Geo  Technology  |  Geological  Engineering  |  Geophysics  |  Geo‐technical  Engineering  |Head Transfer  |  Industrial  Engineering  |  Information  Processing  |  Information  security  Engineering  |  Machine  Design  |  Manufacturing Engineering | Materials Engineering | Mechanical Engineering | Mechatronics | Metallurgical Engineering | Metallurgy | Micro engineering

|Modelling and Imaging Aero Space Engineering:

Aerospace  Engineering  |  Navigator  guidance  &  Control  Acoustics  |  Optics  Electromagnetism  &  radar  |  Information  Processing  |  Data Fusion  |  Robotics  &  Intelligent  System  |  Complex  System  Engineering  |  Air  Vehicle  Engineering  |  Aerial  recognition  Engineering  | Aerospace Contribution to C41SR Systems | Aerospace Science in network centric warfare | Air transport System | Air Traf�ic Management

|  Aerospace  Connections  |  Test  Facilities|  Acquisition  and  near  surface  |  Aerial  recognition  Engineering  |  Aeronautical/  Aerospace Engineering  |  Aerospace  Connections  |  Aerospace  Contribution  to  C41SR  Systems  |  Aerospace  Science  in  network  centric  warfare|  Air Traf�ic Management

Air transport System | Air Vehicle Engineering Civil Engineering:

Bridge Engineering | CAD/CAM | Cementing technology | Ceramic Engineering | Chemical Engineering | Civil Engineering Applications | Civil Engineering | Collaborative Engineering | Communication Engineering | Complex System Engineering | Complexity in Applied Science and Engineering | Computation Fluid Dynamics | Computational Mechanics | Computational Science and Engineering | Computer Aided Engineering  and  Technology  |  Computer  Applications  in  Technology  |  Computer  Engineering  |  Construction  Technology  |  Continuing Engineering Education &Life‐Long Learning | Control Theory | Bio Mechanical Engineering | Bio Medical Engineering| Bio Technology|

Transportation Engineering | Unconventional oil & gas reservoirs | Vertex inducted vibrations |Water Resources Engineering |Strategic Engineering Asset Management | Structural & Machine Design |Structural Engineering |Sub Sea Engineering

Ocean Engineering:

Naval Architecture | Marine Structural Mechanics | safety & Reliability | Polar Engineering | Computation Fluid Dynamics | Vertex inducted vibrations | Port & Water Front Design Engineering | Linear & Non Linear Wave Mechanics | Geo Technology | Costal Engineering | Marine Renewable Energy | Marine Engineering | Sub Sea Engineering | Ship resistance Propulsion| Automation Engineering |Costal Engineering | Marine  Structural  Mechanics  Naval  Architectural  Engineering  |  Naval  Architecture  |  Navigator  guidance  &  Control  Acoustics  |  Nuclear Engineering | Ocean Engineering | Oil Engineering| Knowledge Engineering and Data Mining |Linear & Non Linear Wave Mechanics | Nano Technology | Nano‐solutions | Sensor Network | Ship resistance Propulsion |Solid Mechanics |Sound Engineering

Mining Engineering:

Home Aim & Scope Instruction for Authors Editorial Board Archives Ethics & Policies Contact

(7)

22/5/2020 IJIRAE­Aime and Scope

https://ijirae.com/aim­scope 2/2

Powered by Joomla 1.7 Templates designed by webhosting

Mining Engineering | Safety Technology Engineering | Mineral Process| Coal �ield Geology | Gas Technological Engineering | Petroleum Engineering| reservoir Engineering | Rock Mechanics, Petro Physics | Enhanced oil & Gas recovery | Drilling & Drilling �luids | reservoir simulators  |  Formation  evaluation  |  Fluid  Mechanics  in  porous  media  and  multiphase  �low  engineering  |  Petroleum  Engineering  | Petroleum  Geology  |  Polar  Engineering  |Port  &  Water  Front  Design  Engineering  |  Power  &  Process  Engineering  |  Process  Systems Engineering | Processing | Production Engineering & Fusion Technology | Remote Monitoring |Reservoir Simulation and management Electronics & Communication Engineering:

Electronics & Communication Engineering | Information Theory & communication Theory & Techniques | Modulators, sources & Channel coding  |  Switching  Theory  and  Techniques  |  Communication  Protocols  |  Optical  Communication  |  Microwave  Theory  &  Technologies, radar|  Signal  &  image  Processing  |  Microwave,  Antennas  and  radio  propagation  |  Optoelectronics  |  Satellite  Communication  |  Forensic Engineering  |  Telecommunication  Engineering  |  VLSI  |  Sound  Engineering||  Optics  Electromagnetism  &  radar  |  Robotics  &  Intelligent System| Safety & Reliability| Electronic and Electrical Engineering | Electronics & Communication Engineering

Electrical Engineering:

Electrical Engineering | Power Engineering | Power Quality & Maintenance Engineering | High Voltage Engineering | Renewable Energy | Power Systems | SCADA & Electrical Engineering | High Voltage Emulations Technologies | Electric Power Generation | Electrical Machines

| Instrumentation & Control Engineering | Electromagnetic Compatibility & Electrical Engineering Biological Engineering:

Biological  Engineering  |  Synthetic  Biology  &  Cellular  design|  Energy  of  bimolecular  and  cellular  devices  |  Ecological  &  Environment Engineering | Bio production & Bio Product | Biomedical Engineering | Bio Technology | Environment Engineering & Physics

2011 International Journal of Innovative Research in Advanced Engineering (IJIRAE) ‐ Aime and Scope.

(8)

22/5/2020 IJIRAE­Advisory Board

https://ijirae.com/Editorial%20Board 1/3

0Search

Home Aime and Scope Indexing Call for Paper Instruction for Authors Online Submission Editorial Board Board of Referees (BoR) Archives

Ethics & Policies Publication Ethics and Publication Malpractice Statement

Article Withdrawal Policy Plagiarism Policy Double Blind Peer Review Policy

Copyright, Grants and Ownership Declaration Open Access Overview FAQ

Contact

Downloads

Paper Template Copyright Form

Recent Issues

Volume 7, Issue 04 Volume 7, Issue 03 Volume 7, Issue 02 Volume 7, Issue 01 Volume 6, Issue 12 Volume 6, Issue 11 Volume 6, Issue 10 Volume 6, Issue 09 Volume 6, Issue 08 Volume 6, Issue 07 Volume 6, Issue 06 Volume 6, Issue 05 Volume 6, Issue 04 Volume 6, Issue 03

Editorial Board

Editor‐In‐Chief

Dr. A.Arul Lawrence Selvakumar., D.Sc., (CSE),Ph.D.,(CSE)., M.E., (CSE), Senior Member of IEEE, Member of the Elsevier –Mendeley‐Advisory Panel,

Professor & Dean (Academics).,Rajiv Gandhi Institute of Technology, Bengalure, India , Director‐Accenture, BTLIT, Bengaluru, India

Associate Editor‐In‐Chief

Dr. R.Lalith Kumar., Ph.D.,(CS).,M.E.,(CSE),

Senior Member of IEEE, Member of the Elsevier‐Mendeley‐Advisory Panel, Associate Professor., Rajiv Gandhi Institute of Technology, Bengalure, India Dr.Xiao‐Zhi Gao,

Professor, School of Computing, University of Eastern Finland, FI‐70211 Kuopio, Finland Dr.Xiaolei Wang,

Professor, Aalto University, Finland Dr.Abdel‐Badeh M Salem, Professor,Ain Shams University, Egypt Dr.Ali Ahmed,

Professor,Monash University (Sunway Campus), Malaysia Dr.Dana Prochazkova,

Professor, Czech Technical University, Czech Republic Dr.Hyo Jong Lee,

Professor, Chonbuk National University, South Korea Dr.Jose Maria de Fuentes,

Professor, Univ. Carlos III, Spain Scienti ic Editors

Dr.M. A. Siddiqui,

Professor, Najran University, Saudi Arabia Dr.Mincheol Kim,

Professor, Jeju National University, South Korea Dr.Mohamad Kamal Bin A. Rahim,

Professor, Universiti Teknologi Malaysia, Malaysia Dr.Mohd Zaidi Abdul Rozan,

Professor, Universiti Teknologi Malaysia, Malaysia Dr.Ramakrishnan Sundaram,

Professor, Gannon University, USA Dr.Shyamala C.  Doraisamy,

Professor, University Putra Malaysia, Malaysia Dr.Steven Guan,

Professor, Xi’an Jiaotong‐Liverpool University, China Dr.Afzaal H. Seyal,

Professor, Institut Teknologi Brunei, Brunei Darussalam Dr.Chen Zhi Yuan,

Professor, University of Nottingham, Malaysia Dr.Frans A.  Henskens,

Professor, University of Newcastle, Australia Dr.Inas Khayal,

Professor, Masdar Institute of Science and Technology, UAE Dr.Lakshmi Prayaga,

Professor, University of West Florida, USA Dr.Marenglen Biba,

Professor, University of New York in Tirana, Albania Dr.Md Mahmud Hasan,

Professor, Kazakh‐British Technical University – Kazakhstan Dr.Mohammad Nazir Ahmad,

Professor, Universiti Teknologi Malaysia, Malaysia Dr.Peng Guan,

Professor, Brown University, USA Dr.Rukshan I. Athauda,

Professor, The University of Newcastle, Australia Dr.Steve Reames,

Professor, A’Sharqiyah University, Oman Dr.Yunkai Liu,

Professor, Gannon University, USA  

Executive Editors Dr.B. Shadaksharappa,

Professor & Principal,Shri Sairam College of Engineering College,Anekal, Bangalore,India  Dr.S.Suresh Kumar,

Principal, Vivekanandha College of Engineering for Women,Tamilnadu,India Dr.A.Shanmugam,

Dean ECE & EIE,Director IIPC,SNS College of Technology,coimbatore.

Dr.Prasadh,

Home Aim & Scope Instruction for Authors Editorial Board Archives Ethics & Policies Contact

(9)

22/5/2020 IJIRAE­Advisory Board

https://ijirae.com/Editorial%20Board 2/3

Volume 6, Issue 02 Volume 6, Issue 01 Volume 5, Issue 12 Volume 5, Issue 11 Volume 5, Issue 10 Volume 5, Issue 09 Volume 5, Issue 08 Volume 5, Issue 07 Volume 5, Issue 06 Volume 5, Issue 05 Volume 5, Issue 04 Volume 5, Issue 03 Volume 5, Issue 02 Volume 5, Issue 01 Much more...

Principal, Mookamibhika School of Engineering, Ernakulam, Kerala Dr.G.Mohan Kumar,

Principal, Park College of Engineering & Technology,coimbatore Dr.G.Babu,

Director ‐ Computer Applications, Adhiparasakthi Engineering College,Melmaruvathur,India.

Dr.A.Suresh,

Principal, Maisurii Womens's College of Arts & Science,Salem,India Dr.C.Suresh Gnana Dhas,

Prof./CSE, Vivekanandha College of Engineering for Women.

Dr.L.Malathi,

Profesor/CSE, Vivekanandha College of Engineering for Women.

Dr.N.K.Prema,

Associate Professor,Anna University,chennai Dr.A.Manikandan,

Principal, Muthayammal Memorial College of Arts & Science, Tamil Nadu, India Dr.Thangarasu.,

Asst.Professor, Karpagam University, Coimbatore,India Dr.A.Singaravelan.,

Professor, King College of Technology, Tamil Nadu, India  

Advisory Chair Dr.A.P.Padhi,

Member Executive Committee (Former Vice‐Chancellor), NAAC, Bangalore Dr.M.Saravanakumar,

Dean ‐ Anna University Regional Centre, Coimbatore.

Dr.R.Mahammad Sha i,

College of Engineering & Technology, Mizan‐Tepi University,Ethiopia.

Dr. A.Supha Lakshmi,

Professor  & Head/CSE, Paavai Engineering College, Namakkal – 637018, Tamilnadu, India.

Dr.Deepa.T.P.,

School of Engineering and Technology, Jain University, Bangalore Dr. Shilpa Kulkarni,

Indian Institute of Technology Roorkee  

Technical Chair Dr.Asoke Nath,

Professor, St. Xavier’s College (Autonomous), Kolkata,India Dr. A.Rajalingam,

Lecturer,Shinas College of Technology, Al‐aqur, Shinas, Sultanate of Oman.

Dr.MD.Tabrez Quasim,

Professor,College of Science and Arts University of Bisha, Bisha,Saudi Arabia.

Dr. Srijit Biswas,

Professor, Dept. of Civil Engineering, Manav Rachna International University, Delhi Dr. Vaibhav Sundriyal,

Research Scientist, ODU Research Foundation, United States Dr. Elsayed Ahmed Delnashar,

Professor, Kaferelsheikh University, Egypt.

Dr. Ibrahim Umar Mohammed,

Scientist, National Water Resources Institute, PMB 2309, Mando Road, Kaduna, Nigeria  

Managing Chair Mrs.A.Mercy.,

International Journal of Innovative Research in Advanced Engineering, AM Publications, Hosur  

Review Chair

Dr. Binod Kumar, Dean & Professor, Jayawant Technical Campus, Pune, India Dr.Varsha Turkar, Professor,Thakur College of Science and Commerce, Mumbai, India Dr.V. Balaji, Principal, Sapthagiri College of Engineering, India

Dr. Pritam Gajkumar Shah, Associate Dean, DSEC, Bengaluru, India

Dr.G.Anusha, Associate Professor, Bannari Amman Institute of Technology,Sathyamangalam, India Dr.N.Krishnaraj, Associate Professor, Sree Sastha Institute of Engg & Tech, Chennai, India Dr. Ahmed Nabih Zaki Rashed, Faculty of Electronic Engineering, Menou饀�ia University,Egypt Dr.T.V.Rajini Kanth, Professor in CSE, SNIST, Hyderabad, India

Dr.J.Senthil Kumar, Associate Professor,Dhanraj Baid Jain College, Chennai, India Dr.S.Balaji, Associate Professor,Dhanraj Baid Jain College, Chennai, India Dr. Rakesh Kumar Jha, Assistant Professor, SECE, SMVD University, India

Dr. Sudheer.S.Marar, Assoc.Prof, Nehru College of Engineering and Research Centre, Pampady. Trissur.

Dr. Vishnu Narayan Mishra, Professor, Sardar Vallabhbhai National Institute of Technology,Gujarat,India Dr. S. Rajeshkumar, Assistant Professor,AdhiParasakthi College of Arts and Sciences,Vellore,India Dr.Rachayya. R. Arakerimath, Vice principal,G.H.Raisoni COE and Management, Wagholi,Pune.

Dr. Mohammad Israr, Principal, Dungarpur College of Engineering and Technology, Dungarpur, Rajasthan Dr. VikasJashvantlal Patel, Associate Professor, C.K.Pithawaala College of Engg. & Tech, Surat, India Dr. Saber Mohamed Abd‐Allah, Assistant Professor, Beni‐Suef University, Egypt

Dr. Kiran Patil, Professor,Maharashtra Institute Of Technology, Paud Road,Pune, India Dr. Vaishali Vishwas Patil, Professor/EE, Dr.J.J.Magdum College of Engineering, Jaysingpur, India Dr. Rakesh Kumar, Associate Professor, Madan Mohan Malviya University of Technology, Gorakhpur Dr.H.Ravi Sankar, Senior Scientist,Central Tobacco Research Institute,Rajahmundry, India

Dr. Golam Kibria, Assistant Professor, Dept of Mechanical Engineering, Aliah University, Kolkata, India Dr. Jammi Ashok, Professor, Guru Nanak Institute of Technology,Hyderabad, India

Dr. Sohail Ayub, Assoc Professor, Dept of Civil, Z. H. College, Faculty of Engg. & Technology, Aligarh Dr.K.R.Ananthapadmanaban, Assoc.Prof,Dept of CS, SRM Arts and Science College, Chennai, India Dr.Ramalingam Shanmugam, Professor, Texas State University, San Marcos, TX 78666, USA Dr. Mohamed, University Constantine,Faculty of Sciences,Constantine, Algeria

Dr Sobhana N V, Professor, Department of Computer Science & Engineering, NIT Calicut, India Dr. S.Kishore Reddy, Assoc. Prof, Adama science & Technology University, Adama,  Ethiopia Dr. Abhinav Sharma, Assistant Professor in Govt. R.R. PG College, Alwar (Raj.),India Dr.Mukesh Thakur, Reader, Rungta College of Engineering & Technology, Raipur, Chhattisgarh Dr.L.M.Karthikeyan, Asst Prof/ Dept of Aeronautical Engineering,Techno Global University, India Dr. D. Prince Winston, Assoc.Prof / EEE, Kamaraj College of Engineering, Virudhunagar, India Dr. Ramachandra C G,Professor& Head/Mech ,Srinivas Institute of Technology, Mangalore, India Dr.B.Venkateswarlu, Senior Assistant Prof, School of Advanced Sciences, V.I.T University, Vellore,India Dr.RamaChandra C G, Head, Dept of Marine Engineering, Srinivas Institute of Technology, Mangalore Dr.P.Ezhilarasu, Associate Professor, Dept of CSE, Hindusthan College of Engg & Tech, Coimbatore,India

(10)

22/5/2020 IJIRAE­Advisory Board

https://ijirae.com/Editorial%20Board 3/3

Powered by Joomla 1.7 Templates designed by webhosting

Dr.D.M.Mate, Professor/Mechanical Engineering, Dr.D.Y. Patil Institute of Engg & Tech., Ambi, Pune, India Dr.V.N.Srinivasa Rao Repalle, Professor, Nalanda Institute of Engineering & Tech, Kantepudi, A.P, India

Dr.Mohamed Abdel‐Baset Metwalli Attia, Lecturer,Faculty of computers and informatics, Zagazig university, Egypt Dr. Srijit  Biswas, Professor, Manav Rachna International University, Faridabad,India

Dr. Manoj Kumar Gupta, Professor, MMEC, MMU Mullana (Ambala), India

Dr. Yash Pal Singh, Director, Somany Institute of  Technology & Management, Garhi Bolni Road , Rewari Haryana Dr.A.Akila, Assistant Professor, Vels University, Tamil Nadu, India

Dr. Ravinder Kataria, Lovely Professional University, Punjab, India

Dr. G.Satyavathy, Asst.Prof, Sri Ramakrishna College of Arts & Science for Women, Tamil Nadu, India Dr.MD.Tabrez  Quasim, Asst Prof, Dept of CS & IS, College of Science and Arts, University of Bisha, Saudi Arabia.

Dr. Mahdi  Hosseini, JNTU Hyderabad,India

Dr.Abhishek Rajeshbhai Mehta, Calorx Teachers' University,India

Dr.A.Sasi Kumar, Professor Vels Institute of Science, Technology and Advanced Studies, Chennai.

Dr.T.Velumani, Assistant Professor, Kongu Arts and Science College,Erode,India

This work is licensed under a Creative Commons Attribution 4.0 International License.

2011 International Journal of Innovative Research in Advanced Engineering (IJIRAE) ‐ Editorial Board.

(11)

22/5/2020 IJIRAE­Archives

https://ijirae.com/archives 1/2

0Search

Home Aime and Scope Indexing Call for Paper Instruction for Authors Online Submission Editorial Board Board of Referees (BoR) Archives

Ethics & Policies Publication Ethics and Publication Malpractice Statement

Article Withdrawal Policy Plagiarism Policy Double Blind Peer Review Policy

Copyright, Grants and Ownership Declaration Open Access Overview FAQ

Contact

Downloads

Paper Template Copyright Form

Recent Issues

Volume 7, Issue 04 Volume 7, Issue 03 Volume 7, Issue 02 Volume 7, Issue 01 Volume 6, Issue 12 Volume 6, Issue 11 Volume 6, Issue 10 Volume 6, Issue 09 Volume 6, Issue 08 Volume 6, Issue 07 Volume 6, Issue 06 Volume 6, Issue 05 Volume 6, Issue 04 Volume 6, Issue 03

 

 

IJIRAE‐ 2020 Issues

  Volume‐7 Issue‐4

  Volume‐7 Issue‐3

  Volume‐7 Issue‐2

  Volume‐7 Issue‐1

 

IJIRAE‐ 2019 Issues

  Volume‐6 Issue‐12

  Volume‐6 Issue‐11

  Volume‐6 Issue‐10

  Volume‐6 Issue‐9  

Volume‐6 Issue‐8

  Volume‐6 Issue‐7

  Volume‐6 Issue‐6

  Volume‐6 Issue‐5  

Volume‐6 Issue‐4

  Volume‐6 Issue‐3

  Volume‐6 Issue‐2

  Volume‐6 Issue‐1  

IJIRAE‐ 2018 Issues

  Volume‐5 Issue‐12

  Volume‐5 Issue‐11

  Volume‐5 Issue‐10

  Volume‐5 Issue‐9  

Volume‐5 Issue‐8

  Volume‐5 Issue‐7

  Volume‐5 Issue‐6

  Volume‐5 Issue‐5  

Volume‐5 Issue‐4

  Volume‐5 Issue‐3

  Volume‐5 Issue‐2

  Volume‐5 Issue‐1  

IJIRAE‐ 2017 Issues

  Volume‐4 Issue‐12

  Volume‐4 Issue‐11

  Volume‐4 Issue‐10

  Volume‐4 Issue‐9  

Volume‐4 Issue‐8

  Volume‐4 Issue‐7

  Volume‐4 Issue‐6

  Volume‐4 Issue‐5  

Volume‐4 Issue‐4

  Volume‐4 Issue‐3

  Volume‐4 Issue‐2

  Volume‐4 Issue‐1  

 

IJIRAE‐ 2016 Issues

  Volume‐3 Issue‐12

  Volume‐3 Issue‐11

  Volume‐3 Issue‐10

  Volume‐3 Issue‐9  

Volume‐3 Issue‐8

  Volume‐3 Issue‐7

  Volume‐3 Issue‐6

  Volume‐3 Issue‐5  

Volume‐3 Issue‐4

  Volume‐3 Issue‐3

   Volume‐3 Issue‐2

  Volume‐3 Issue‐1  

 

IJIRAE‐ 2015 Issues

       

Volume2.Issue12.No1 Home Aim & Scope Instruction for Authors Editorial Board Archives Ethics & Policies Contact

(12)

22/5/2020 IJIRAE­Archives

https://ijirae.com/archives 2/2

Powered by Joomla 1.7 Templates designed by webhosting

Volume 6, Issue 02 Volume 6, Issue 01 Volume 5, Issue 12 Volume 5, Issue 11 Volume 5, Issue 10 Volume 5, Issue 09 Volume 5, Issue 08 Volume 5, Issue 07 Volume 5, Issue 06 Volume 5, Issue 05 Volume 5, Issue 04 Volume 5, Issue 03 Volume 5, Issue 02 Volume 5, Issue 01 Much more...

   Volume2.Issue11.No1

   Volume2.Issue10.No1

   Volume2.Issue9.No1

  Volume2.Issue8.No1  

Volume2.Issue7.No1

  Volume2.Issue6.No1

  Volume2.Issue5.No3

  Volume2.Issue5.No2  

Volume2.Issue5.No1

  Volume2.Issue4.No4

  Volume2.Issue4.No3

  Volume2.Issue4.No2  

Volume2.Issue4.No1

   Volume2.Issue3.No2

  Volume2.Issue3.No1

  Volume2.Issue2.No4  

Volume2.Issue2.No3

  Volume2.Issue2.No2

  Volume2.Issue2.No1

  Volume2.Issue1.No5  

Volume2.Issue1.No4

  Volume2.Issue1.No3

  Volume2.Issue1.No2

  Volume2.Issue1.No1  

 

IJIRAE‐ 2014 Issues

   Volume1.Issue12.No1

   Volume1.Issue11.No2

  Volume1.Issue11.No1

  Volume1.Issue10.No8  

Volume1.Issue10.No7

  Volume1.Issue10.No6

   Volume1.Issue10.No5

  Volume1.Issue10.No4  

Volume1.Issue10.No3

  Volume1.Issue10.No2

   Volume1.Issue10.No1

  Volume1.Issue9.No4  

Volume1.Issue9.No3

  Volume1.Issue9.No2

   Volume1.Issue9.No1

  Volume1.Issue8.No6  

Volume1.Issue8.No5

  Volume1.Issue8.No4

  Volume1.Issue8.No3

  Volume1.Issue8.No2  

Volume1.Issue8.No1

  Volume1.Issue7.No4

  Volume1.Issue7.No3

  Volume1.Issue7.No2  

Volume1.Issue7.No1

   Volume1.Issue6.No7

  Volume1.Issue6.No6

  Volume1.Issue6.No5  

Volume1.Issue6.No4

  Volume1.Issue6.No3

  Volume1.Issue6.No2

  Volume1.Issue6.No1  

Volume1.Issue5.No4

  Volume1.Issue5.No3

  Volume1.Issue5.No2

  Volume1.Issue5.No1  

Volume1.Issue4.No4

  Volume1.Issue4.No3

  Volume1.Issue4.No2

  Volume1.Issue4.No1  

 May Special Issue

  Volume1.Issue2.No 4

  Volume1.Issue2.No3

  Volume1.Issue2.No2  

Volume1.Issue2.No1

  Volume1.Issue1.No3

   Volume1.Issue1.No2

  Volume1.Issue1.No1  

This work is licensed under a Creative Commons Attribution 4.0 International License.

2011 International Journal of Innovative Research in Advanced Engineering (IJIRAE) ‐ Archives.

(13)

22/5/2020 IJIRAE­Volume 4, Issue 11

https://ijirae.com/volume­4­issue­11 1/1

Powered by Joomla 1.7 Templates designed by webhosting

0Search

Home Aime and Scope Indexing Call for Paper Instruction for Authors Online Submission Editorial Board Board of Referees (BoR) Archives

Ethics & Policies Publication Ethics and Publication Malpractice Statement

Article Withdrawal Policy Plagiarism Policy Double Blind Peer Review Policy

Copyright, Grants and Ownership Declaration Open Access Overview FAQ

Contact

Downloads

Paper Template Copyright Form

S.No Title/Author Name Paper ID

01 A REVIEW OF SOIL STABILIZATION USING POLYPROPYLENE AND WHEAT HUSK FIBER  Authors: HIMANSHU GUPTA,MANOJ SHARMA, ASHUTOSH S. TRIVEDI

DOI: 10.26562/IJIRAE.2017.NVAE10081

NVAE10081

02 Support Vector Machine Classi ier for Sentiment Analysis of Feedback Marketplace with a Comparison Features at Aspect Level 

Authors:Hario Laskito Ardi,Eko Sediyono,Retno Kusumaningrum DOI: 10.26562/IJIRAE.2017.NVAE10080

NVAE10080

03 THE PRODUCT DESIGN OF WATER BOTTLED FOR ADULTS ACCORDING TO CUSTOMER NEEDS USING QUALITY FUNCTION DEPLOYMENT (QFD) METHOD

Authors:Hasan Mastrisiswadi , Amalia DOI: 10.26562/IJIRAE.2017.NVAE10084

NVAE10084

04 MONITORING FOR VEHICLE VELOCITY AND ACCELERATION USING AN ACCELEROMETER  Authors: Catur Edi Widodo,Kusworo Adi

DOI: 10.26562/IJIRAE.2017.NVAE10086

NVAE10086

05 DISTANCE MEASUREMENT WITH A STEREO CAMERA  Authors: Kusworo Adi , Catur Edi Widodo

DOI: 10.26562/IJIRAE.2017.NVAE10087

NVAE10087

06 THE ROLE OF HIGH ORDER TERMS IN LANDAU THEORY TOWARD LANDAU‐KHALATNIKOV EQUATION OF MOTION 

Author: Vincensius Gunawan DOI: 10.26562/IJIRAE.2017.NVAE10088

NVAE10088

07 APPLICATION OF BUCK CONVERTER ON THREE PHASE INDUCTION MOTOR DYNAMIC BRAKING USING DC INJECT METHOD 

Authors: Jaka Windarta ,Tejo Sukmadi , Maulinda Setiawan DOI: 10.26562/IJIRAE.2017.NVAE10089

NVAE10089

08 ANALYSIS OF SOLAR POWERED SELF BALANCING VEHICLE  Authors: Prof. Chetan V. Papade, Akshay R. Hiremath DOI: 10.26562/IJIRAE.2017.NVAE10090

NVAE10090

Paper uploading is in progress. Author(S) are requested to complete their paper formalities.

 

2011 International Journal of Innovative Research in Advanced Engineering (IJIRAE) ‐ International Journal of Innovative Research in Advanced Engineering (IJIRAE).

Home Aim & Scope Instruction for Authors Editorial Board Archives Ethics & Policies Contact

(14)

22/5/2020 IJIRAE­Indexing

https://ijirae.com/indexing 2/3

Volume 6, Issue 02 Volume 6, Issue 01 Volume 5, Issue 12 Volume 5, Issue 11 Volume 5, Issue 10 Volume 5, Issue 09 Volume 5, Issue 08 Volume 5, Issue 07 Volume 5, Issue 06 Volume 5, Issue 05 Volume 5, Issue 04 Volume 5, Issue 03 Volume 5, Issue 02 Volume 5, Issue 01 Much more...

Referensi

Dokumen terkait

putriwinda My Journals My Profile Log Out PREPARING FOR SUBMISSION HOME ABOUT USER HOME SEARCH CURRENT ARCHIVES ANNOUNCEMENTS EDITORIAL TEAM EDITORIAL POLICIES AUTHOR GUIDELINES

The answer to this question can be found in Law Number 14 Year 2011 Concerning Patents hereinafter shall be referred to as the Patent Law of 20015 stating that patent is a right granted