JURNAL ILMIAH - Undip PAK Repository

LEMBAR

HASIL PENILAIAN SEJAWAT SEBIDANG ATAU PEER REWEW

Judul Jurnal Ilmiah (Artikel)

Jumlah Penulis

Status

Pengusul Identitas Jurnal Ilmiah

Jan

Schipper)

: Penulis Kedua

: a. ^NamaJumal b.

Nomor ISSN

c.

Vol, No.,

Bln

Thn

d.

^Penerbit

e. DOI artikel fiika

^ada)

f.

^{Alamat web}

^jurnal

Alamat

Artikel

KARYA ILMIAH ^: JURNAL ILMIAH

An analytical approach on the tribological behaviour of pocketed slider bearings with boundary slip including cavitation

4 orung(M. Muchammad, Mohammad Tauviqirrahman,

J.

Jamari, Dirk

Lubrication science 1557-6833 (online)

Volume 29, Issue

3,2017, Hal.

133-152

Wiley-Blackwell

https://doi.org/1 0. 1 002/ls. 1 3 6 1

https:i/oniinelitrrary'.r.viley.comldoi/abs/l 0. 1 002/ls. 1

361

http:/leorints.undip.ac.id/7 I 65 1 i4l1 0._An_anal)'tical approach

on theJribological_behaviour of

^pock

eted_slider bearings

with

bounda$,

slip

inclutlingl cavitation.pdf

Scopus (SJR 0,59), Clarivate Analytics

(IF =

1,682)

g.

^Terindex

MP.

¹

96204281990012001

Unit Kerja

:

Departemen Teknik Mesin FT LINDIP Unit Keda

:

Departemen Teknik Mesin FT UNDIP Hasil Penilaian Peer Review

^:

Komponen yang dinilai ^{Nilai Reviewer} Nilai rata-rata Reviewer I ^Reviewer

²

a. Kelengkapan unsur

isi

jurnalQ0%) _{4,00 4,00 4,00}

b. ^{Ruang lingkup}

^dan

^kedalaman

pembahasan

(30%)

12,00 11,00 11,50

c. ^Kecukupan dan kemutahiran data/informasi

dan

metodologi (30%\

12,00 12,00 12,00

d. Kelengkapan unsur dan kualitas terbitan/jurnal

(30o/o\

12,00 12,00 12,00

Total: ^(100%) 40,00 39,00 39,50

Nilai Pengutol =

^(40%o

x 39,50) I

3

= 5,27

Semarang,

8

Februari 2020

Ojo Kurdi, S.T., M.T., Ph.D

MP.

¹ 97303

t7 199903100r

LEMBAR

HASIL

PENILAIAN

SEJAWAT SEBIDANG ATAU PEERREWEW

Judul Jumal Ilmiah (Artikel) Jumlah Penulis

Status Pengusul Identitas Jumal Ilmiah

Kategori Publikasi Jumal Ilmiah (beri /pada kategori yang tepat)

KARYA ILMIAH

: JURNAL

ILMIAH

An

analytical approach on the tribological behaviour

of

pocketed slider bearings

with

boundary slip including cavitation

4 orang (M. Muchammad, Mohammad Tauviqirrahman. J. Jamari, Dirk Jan Schipper) Penulis Kedua

a.

^{Nama Jumal}

b.

^Nomor ISSN

c.

Vol, No., Bln Thn

d

^Penerbit

e.

DOI artikel fiika ^ada)

f.

^{Alamat web jurnal}

Alamat Artikel

g.

Terindex

Jurnal Ilmiah Intemasional Bereputasi Jurnal llmiah Intemasional

Jumal llmiah Nasional Terakreditasi Jurnal Ilmiah Nasional Tidak Terakreditasi

Ir. Eflita\Yoh?rndrM.T. Ph. D NIP. l 9620428t9900 1200

I

:

Lubrication science

:

1557-6833 (online)

:

Volume 29, Issue 3,2017, Hal. 133-152

:

Wiley-Blackwell

:

https:i/doi.orgli 0. I 002/ls. I 36 L

:

https://onlinelibrarv.wiley.com/doi/abs/l 0. 1 002,4s. 1 36 I

: http://eprints.undip

l0._An analytical appr oach on_the tribological behaviour*of pocketed_slide{_

bearin gs*with boundary_sli rr incl udins cavitat iorr. pclf

:

Scopus (SJR 0,59), Clarivate Analytics (IF = 1,682)

Hasil Peer Review

Komponen Yang

Dinilai

Nilai Maksimal Jurnal llmiah

Nilai

Akhir

Yang Diperoleh Internasional

Bereputasi Inlernasional Nasional Terakreditasi

Nasional

Tidak

Terakreditasi

a.

Kelengkapan unsur isi iumal (10%) 4.00 4,00

b.

^Ruang lingkup dan kedalaman oembahasan (3002)

12,00 12,00

c.

^{Kecukupan dan} kemutahiran datalinformasi dan metodologi (30%\

12,00 12,00

d.

Kelengkapanunsurdankualitas terbitaMumal (30%)

12,00 12,00

Total =

^{(100%) 40.00} 40.00

Nilai Pengusul (kontribusi pengusul penulis) = (40% x 40,00) ^{/ 3} = ^5,33 Catstsn Penilaian artikel oleh Reyiewer :

1.

Kesesuaian dan kelengkapan unsur isi

iurnal:

Unsur-unsur artikel telah sesuai dengan panduan penulisan jumal Lubrication Science. Kajian ilmu sesuai dengan bidang ilmu pengusul, yaitu Teknik Mesin. Nilai (4)

Ruang linskup dan kedalaman pembahasan:

Atikel ini

membahas tentang penurunan persamaan pelumasan baru untuk bantalan. Pembahasan dalam artikel

ini

sangat mendalam dan komprehensif. Berbagai variable penelitian dipelajari pengaruhnya. Sejumlah persamaan matematis diturunkan dengan detil dan dianalisa secara lengkap. Tata bahasa inggris yang digunakanjuga baik. Nilai (12)

Kecukupan dan kem utakhiran data/informasi dan metodolosi:

Artikel telah menunjukkan kebaruan ide dan kemutakhiran informasi. Artikel ini menghasilkan kesimpulan tentang manfaat aplikasi hydrophonic coating untuk kepentingan rekayasa bantalan. Metodologi dan data-data hasil penelitianjuga disajikan dengan jelas dengan grafik-grafik yang memiliki keterbacaan tinggi. Similarity index juga

hanyallok.Nilai

(12)

Kelenskanan unsur dan kualitas ferbitan:

Jurnal ini merupakan Jurnal intemasional bereputasi tinggi. Jumal ini memiliki SJR tahun 2018 sebesar 0,59 dan Impact Factor yang sangat tinggi berdasarkan Web of Science (Thomson Reuters) sebesar 1.682. Nilai (12)

4.

Unit Kerja : Departemen Teknik Mesin FT UNDIP

LEMBAR

HASIL

PENILAIAN

SEJAWAT SEBIDANG ATAU PEER REWEW

KARYA ILMIAH

: JURNAL

ILMIAH

: An

analytical approach on the tribological _behaviour

of

pocketed slider bearings with boundary slip including cavitation

:

^{4 orang} (M. Muchammad, Mohammad Tauviqirrahman. J. Jamari, Dirk Jan Schipper)

:

Penulis Kedua Judul Jumal Ilmiah (Artikel)

Jumlah Penulis Status Pengusul Identitas Jurnal Ilmiah

Kategori Publikasi Jumal Ilmiah

fteri

^{lpada kategori} yang tepat)

. a.

^{Nama Jumal}

b.

Nomor ISSN

c.

Voi, No., Bln Thn

d.

^Penerbit

e.

DOI artikel

(ika

ada)

f.

^{Alamat web jumal}

Alamat Artikel

g.

Terindex

Lubrication science 1557-6833 (online)

Volume 29, Issue 3,2017, Hal. 133-152 Wiley-Blackwell

https://doi.orei I 0. I

002/il36

¹

https://onlinelibrary.wiley.com/doi/abs/l 0. t 002/ls. I 36 I http://eprints.undip.ac.id/71 65 I /4/1 0._An_analytical arrpr oach*on*theJribolosical behaviour_of pocketed_slider bearings_rvith_boundary

slip

includine cavitation.pdf Scopus (SJR 0,59), Clarivate Analytics (IF = 1,682) Jumal Ilmiah Internasional Bereputasi

Jumal Ilmiah Internasional

Jumal llmiah Nasional Terakreditasi Jumal llmiah Nasional Tidak Terakreditasi Hasil Penilaian Peer Review:

Komponen Yang

Dinilai

Nilai Maksimal Jurnal Ilmiah

Nilai

Akhir

Yang Diperoleh Internasional

Bereputasi Internasional Nasional Terakreditasi

Nasional

Tidak

Terakreditasi

a- Kelenskaoan unsur isi iumal (10%) 4.00 4.00

b. Ruang lingkup dan kedalaman oembahasan (30%)

12,00 I1,00

c. Kecukupan dan kemutahiran data/informasi dan metodolosi ⁽ 3jo/o\

12,00 12,00

d. Kelengkapan unsur dan kualitas terbitar/iumal (30%)

12,00 12,00

Totel =

^{(l0OYo) 40.00} 39.00

Nilai Pengusul (kontribusi pengusul penulis)

*

(40nh x 39,00) I 3 = 5,20 Catatan Penilaian artikel oleh Reviewer :

l.

Kesesuaian dan kelengkaoan unsur isi

iurnal:

Artikel

telah sesuai dengan panduan penulisan jurnal Lubrication Science (Judul, Abstralq Nomenclature, Pendahuluan, Metodologi, Hasil dan Panbahasan, Kesimpulan, Referensi). Lampiran juga diberikan seeara lengkap. Tema yang diangkat dalarn paper telah sesuai dengan kepakaran pengusul.

2.

Ruans linskun dan kedalaman nembahasau

Artikel membahas tentang pendekatan analitis masalah pelumasan dalam bearing dengan memperkenalkan slip. Pembahasan dilakukan secara mendalam dan data-data hasil penelitian dibandingkan dengan banyak referensi terkini.

3.

Kecukupan dan kemutakhiran data/informasi dan metodologi:

l5 dari 35 daftar pustaka yang digunakan merupakan pustaka terkini (kurang dari l0 tahun saat paper dipublikasikan). Gambar- gambar representasi model dan grafik-grafik hasil simulasi numerik disajikan secara jelas dan menarik. Metode analisis diberikan secara runut. Tumitin similarity index juga cukup rendah 11%.

4.

Kelenskapan unsur dan kualitas terbitan:

Jurnal termasuk Jumal Intemasional Bereputasi dengan SJR

:

0.59 (Q2). Jumal terindex Scopus dan Web of Science. Jumal diterbitkan oleh penerbit kenamaan Wiley.

Semarang, 5 Maret 2020 Reviewer 2

Kurdi, ST., M.T.. PILD.

rP. 197 303 17 199903 1 00

l

nit Kerja : Departemen Teknik Mesin FT UNDIP

Scopus

Document details

References (35)

60 of 139

An analytical approach on the tribological behaviour of pocketed slider bearings with boundary slip including cavitation

^(Article)

, , ,

Laboratory for Surface Technology and Tribology, Faculty of Engineering Technology, University of Twente, Enschede, Netherlands

Laboratory for Engineering Design and Tribology, Department of Mechanical Engineering, University of Diponegoro, Semarang, Indonesia

Abstract

Slider bearing performance depends on the boundary conditions at the interface between the solid surfaces and the fluid. This paper presents the combined effect of pockets and boundary slip on the load support and friction of parallel sliding systems using analytical solutions for a simple pocketed bearing. The effect of cavitation was of particular interest with respect to the inlet suction mechanism. It was demonstrated that applying boundary slip in a pocketed slider bearing gives a reduction in load support compared with the textured bearing without wall slip. Adding slip over the whole surface could retard the presence of cavitation. The influence of boundary slip is explored, and was found to significantly affect the frictional behaviour. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley

& Sons, Ltd.

SciVal Topic Prominence

Topic:

Prominence percentile: 95.394

Author keywords

analytical method friction load support slider bearing slip

Indexed keywords

Engineering controlled terms:

Cavitation Copyrights Friction

Engineering uncontrolled terms

Analytical approach Analytical method Slider bearings Sliding systems slip Suction mechanism Textured bearings Tribological behaviour

Engineering main heading:

Bearings (structural)

◅ Back to results ◅ Previous Next ▻



Export



Download



Print



E-mail



Save to PDF

⋆

Add to List More...

▻

View at Publisher Lubrication Science

Volume 29, Issue 3, 1 April 2017, Pages 133-152

Muchammad, M.^a,b  Tauviqirrahman, M.^b Jamari, J.^b Schipper, D.J.^a 

a b



View references (35)



Drag reduction | Molecular dynamics | Boundary slip



ISSN: 09540075 CODEN: LUSCE Source Type: Journal Original language: English

DOI: 10.1002/ls.1361 Document Type: Article

Publisher: John Wiley and Sons Ltd

▻ View in search results format

PlumX Metrics

Usage, Captures, Mentions, Social Media and Citations beyond Scopus.

Metrics

14

Citations in Scopus

60th percentile

2.09

Field-Weighted Citation Impact

Cited by 14 documents

, ,

(2019) Tribology International

, ,

(2019) Tribology International

, ,

(2019) AIP Conference Proceedings

Inform me when this document is cited in Scopus:

Related documents

, ,

 View all metrics ▻



Hydrodynamic lubrication analysis of two-dimensional section between piston skirt and textured cylinder wall considering slip boundary conditions Guo, C. Song, Q. Liu, Z.

Interplay between wall slip and cavitation: A complementary variable approach

Biancofiore, L. Giacopini, M.

Dini, D.

Effect of eccentricity ratio on the hydrodynamic performance of journal bearing considering cavitation

Susilowati, S. Hilmy, F.

Arfiandani, D.

View all 14 citing documents

Set citation alert ▻

▻ Set citation feed

Theoretical investigation of boundary slip on the hydrodynamic lubrication performance in pocketed bearings including cavitation Muchammad, M.

Tauviqirrahman, M. Pratomo, A.W.

Etsion, I., Halperin, G., Brizmer, V., Kligerman, Y.

(2004) Tribology Letters, 17 (2), pp. 295-300.  . doi: 10.1023/B:TRIL.0000032467.88800.59

Kovalchenko, A., Ajayi, O., Erdemir, A., Fenske, G., Etsion, I.

(2005) Tribology International, 38 (3), pp. 219-225.  . doi: 10.1016/j.triboint.2004.08.004

Etsion, I., Halperin, G.

(2002) Tribology Transactions, 45 (3), pp. 430-434.  . doi: 10.1080/10402000208982570

Ryk, G., Kligerman, Y., Etsion, I.

(2002) Tribology Transactions, 45 (4), pp. 444-449.  . doi: 10.1080/10402000208982572

Arghir, M., Roucou, N., Helene, M., Frene, I.

(2003) Journal of Tribology, 125 (2), pp. 309-318.  . doi: 10.1115/1.1506328

Sahlin, F., Glavatskih, S.B., Almqvist, T., Larsson, R.

(2005) Journal of Tribology, 127 (1), pp. 96-102.  . doi: 10.1115/1.1828067

Brajdic-Mitidieri, P., Gosman, A.D., Ioannides, S., Spikes, H.A.

(2004) Proceedings of the ASME/STLE International Joint Tribology Conference, IJTC 2004, (PART A), pp.

737-747.  .

ISBN: 0791841812

All Export



Print



E-mail



Save to PDF Create bibliography 1

Experimental investigation of laser surface textured parallel thrust bearings

Cited 235 times View at Publisher

2

The effect of laser surface texturing on transitions in lubrication regimes during unidirectional sliding contact

Cited 394 times

View at Publisher

3

A laser surface textured hydrostatic mechanical seal

Cited 214 times

View at Publisher

4

Experimental investigation of laser surface texturing for reciprocating automotive components

Cited 332 times View at Publisher

5

Theoretical analysis of the incompressible laminar flow in a macro-roughness cell

Cited 113 times

View at Publisher

6

Two-dimensional CFD-analysis of micro-patterned surfaces in hydrodynamic lubrication

Cited 137 times View at Publisher

7

CFD analysis of a low friction pocketed PAD bearing

Cited 4 times

View at Publisher

(2017) International Journal of Surface Science and Engineering

, ,

(2013) Acta Mechanica

, ,

(2013) Tribology Transactions

Find more related documents in Scopus based on:

A study of surface texturing and boundary slip on improving the load support of lubricated parallel sliding contacts

Tauviqirrahman, M. Ismail, R.

Jamari, J.

Numerical study of the load- carrying capacity of lubricated parallel sliding textured surfaces including wall slip

Tauviqirrahman, M.

Muchammad Jamari

View all related documents based on references

▻

Authors Keywords ▻

Kligerman, Y., Etsion, I., Shinkarenko, A.

(2005) Journal of Tribology, 127 (3), pp. 632-638.  . doi: 10.1115/1.1866171

Fowell, M., Olver, A.V., Gosman, A.D., Spikes, H.A., Pegg, I.

(2007) Journal of Tribology, 129 (2), pp. 336-347.  . doi: 10.1115/1.2540089

Dobrica, M.B., Fillon, M.

(2009) Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 223 (1), pp. 69-78.  .

doi: 10.1243/13506501JET433

Jing, H.A.N., Fang, L., Jiapeng, S.U.N., Shirong, G.E.

(2010) Tribology Transactions, 53 (6), pp. 860-870.  . doi: 10.1080/10402004.2010.496070

Zhu, Y., Granick, S.

(2002) Physical Review Letters, 88 (10), pp. 1061021-1061024.  .

Zhu, Y., Granick, S.

(2002) Langmuir, 18 (26), pp. 10058-10063.  . doi: 10.1021/la026016f

Bonaccurso, E., Kappl, M., Butt, H.-J.

(2002) Physical Review Letters, 88 (7), pp. 761031-761034.  .

Kalin, M., Polajnar, M.

(2013) Tribology Letters, 52 (2), pp. 185-194.  . doi: 10.1007/s11249-013-0194-y

8

Improving tribological performance of piston rings by partial surface texturing

Cited 250 times

View at Publisher

9

Entrainment and inlet suction: Two mechanisms of hydrodynamic lubrication in textured bearings

Cited 126 times

View at Publisher

10

About the validity of Reynolds equation and inertia effects in textured sliders of infinite width

Cited 125 times

View at Publisher

11

Hydrodynamic lubrication of microdimple textured surface using three-dimensional CFD

Cited 75 times

View at Publisher

12

Limits of the hydrodynamic no-slip boundary condition

Cited 479 times View at Publisher

13

No-slip boundary condition switches to partial slip when fluid contains surfactant

Cited 91 times

View at Publisher

14

Hydrodynamic force measurements: Boundary slip of water on hydrophilic surfaces and electrokinetic effects

Cited 231 times View at Publisher

15

The effect of wetting and surface energy on the friction and slip in oil-lubricated contacts

Cited 41 times View at Publisher

Jin, J., Zhang, G.-X., Wang, X.-J.

(2004) Journal of Shanghai University, 8 (1), pp. 85-89.  . doi: 10.1007/s11741-004-0018-2

Choo, J.H., Glovnea, R.P., Forrest, A.K., Spikes, H.A.

(2007) Journal of Tribology, 129 (3), pp. 611-620.  . doi: 10.1115/1.2736704

Choo, J.H., Spikes, H.A., Ratoi, M., Glovnea, R., Forrest, A.

(2007) Tribology International, 40 (2 SPEC. ISS.), pp. 154-159.  . doi: 10.1016/j.triboint.2005.09.006

Sanchez-Reyes, J., Archer, L.A.

(2003) Langmuir, 19 (8), pp. 3304-3312.  . doi: 10.1021/la0265326

Leong, J.Y., Reddyhoff, T., Sinha, S.K., Holmes, A.S., Spikes, H.A.

(2013) Tribology Letters, 49 (1), pp. 217-225.  . doi: 10.1007/s11249-012-0056-z

Ku, I.S.Y., Reddyhoff, T., Wayte, R., Choo, J.H., Holmes, A.S., Spikes, H.A.

(2012) Journal of Tribology, 134 (1), art. no. 012002.  . doi: 10.1115/1.4005819

Delgado, M.A., Franco, J.M., Partal, P., Gallegos, C.

(2005) Chemical Engineering and Processing: Process Intensification, 44 (7), pp. 805-817.  . doi: 10.1016/j.cep.2004.09.003

Ruiz-Viera, M.J., Delgado, M.A., Franco, J.M., Gallegos, C.

(2006) Journal of Non-Newtonian Fluid Mechanics, 139 (3), pp. 190-196.  . doi: 10.1016/j.jnnfm.2006.08.007

16

Experiment and simulations on lubrication performance of EMP journal bearing

Cited 6 times

View at Publisher

17

A low friction bearing based on liquid slip at the wall

Cited 77 times

View at Publisher

18

Friction reduction in low-load hydrodynamic lubrication with a hydrophobic surface

Cited 79 times www.elsevier.com/inca/publications/store/3/0/4/7/4

View at Publisher

19

Interfacial slip violations in polymer solutions: Role of microscale surface roughness

Cited 54 times

View at Publisher

20

Hydrodynamic friction reduction in a MAC-hexadecane lubricated MEMS contact

Cited 14 times

View at Publisher

21

Lubrication of microelectromechanical devices using liquids of different viscosities

Cited 12 times

View at Publisher

22

Experimental study of grease flow in pipelines: Wall slip and air entrainment effects

Cited 33 times

View at Publisher

23

Evaluation of wall slip effects in the lubricating grease/air two-phase flow along pipelines

Cited 6 times

View at Publisher

Salant, R., Fortier, A.

(2004) Tribology Transactions, 47 (3), pp. 328-334.  . doi: 10.1080/05698190490455348

Wu, C.W., Ma, G.J., Zhou, P., Wu, C.D.

(2006) Journal of Tribology, 128 (4), pp. 904-907.  . doi: 10.1115/1.2345419

Ma, G., Wu, C., Zhou, P.

(2007) Science in China, Series G: Physics, Mechanics and Astronomy, 50 (3), pp. 321-330.  . doi: 10.1007/s11433-007-0034-x

Ma, G.J., Wu, C.W., Zhou, P.

(2007) Acta Mechanica Sinica/Lixue Xuebao, 23 (6), pp. 655-661.  . doi: 10.1007/s10409-007-0099-9

Bayada, G., Meurisse, M.-H.

(2009) Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 223 (3), pp. 371-381.  .

doi: 10.1243/13506501JET476

Rao, T.V.V.L.N.

(2010) Journal of Tribology, 132 (1), pp. 1-7.  .

doi: 10.1115/1.4000276

Aurelian, F., Patrick, M., Mohamed, H.

(2011) Tribology International, 44 (7-8), pp. 868-877.  . doi: 10.1016/j.triboint.2011.03.003

24

Numerical analysis of a slider bearing with a heterogeneous slip/no-slip surface

Cited 107 times

View at Publisher

25

Low friction and high load support capacity of slider bearing with a mixed slip surface

Cited 47 times

View at Publisher

26

Hydrodynamics of slip wedge and optimization of surface slip property

Cited 10 times

View at Publisher

27

Influence of wall slip on the hydrodynamic behavior of a two-dimensional slider bearing

Cited 5 times

View at Publisher

28

Impact of the cavitation model on the theoretical performance of heterogeneous slip/no-slip engineered contacts in hydrodynamic conditions

Cited 26 times http://pij.sagepub.com/content/by/year

View at Publisher

29

Analysis of single-grooved slider and journal bearing with partial slip surface

Cited 21 times http://asmedl.aip.org/getpdf/servlet/GetPDFServlet?

filetype=pdf&id=JOTRE9000132000001014501000001&idtype=cvips&prog=normal

View at Publisher

30

Wall slip effects in (elasto) hydrodynamic journal bearings

Cited 75 times View at Publisher

60 of 139

Tauviqirrahman, M., Ismail, R., Jamari, J., Schipper, D.J.

(2013) Tribology International, 66, pp. 274-281.  . doi: 10.1016/j.triboint.2013.05.014

Tauviqirrahman, M., Ismail, R., Jamari, J., Schipper, D.J.

(2013) Acta Mechanica, 224 (2), pp. 365-381.  . doi: 10.1007/s00707-012-0752-7

Tauviqirrahman, M., Muchammad, Jamari, Schipper, D.J.

(2013) Tribology Transactions, 57 (1), pp. 134-145.  . doi: 10.1080/10402004.2013.854943

Tauviqirrahman, M., Muchammad, Ismail, R., Jamari, Schipper, D.J.

(Open Access)

(2014) Jurnal Teknologi (Sciences and Engineering), 66 (3), pp. 75-80.  . doi: 10.11113/jt.v66.2701

Wang, L.-L., Lu, C.-H.

(2015) Lubrication Science, 27 (3), pp. 193-207.  . doi: 10.1002/ls.1267

Muchammad, M.; Laboratory for Surface Technology and Tribology, Faculty of Engineering Technology, University of Twente, Enschede, Netherlands; email:

© Copyright 2017 Elsevier B.V., All rights reserved.

31

Combined effect of texturing and boundary slippage in lubricated sliding contacts

Cited 23 times

View at Publisher

32

A study of surface texturing and boundary slip on improving the load support of lubricated parallel sliding contacts

Cited 38 times

View at Publisher

33

Numerical study of the load-carrying capacity of lubricated parallel sliding textured surfaces including wall slip

Cited 16 times www.tandf.co.uk/journals/titles/10402004.asp

View at Publisher

34

Friction characteristics of liquid lubricated MEMS with deterministic boundary slippage

Cited 3 times http://www.jurnalteknologi.utm.my/index.php/jurnalteknologi/article/view/2701/2032

View at Publisher

35

Numerical analysis of spiral oil wedge sleeve bearing including cavitation and wall slip effects

Cited 11 times http://www.interscience.wiley.com/jpages/0954-0075

View at Publisher



m_mad5373@yahoo.com

◅ Back to results ◅ Previous Next ▻  Top of page

About Scopus

What is Scopus Content coverage Scopus blog Scopus API Privacy matters

Language

⽇本語に切り替える 切换到简体中文 切換到繁體中文 Русский язык

Customer Service

Help Contact us

Terms and conditions ↗ Privacy policy ↗

Copyright © . All rights reserved. Scopus® is a registered trademark of Elsevier B.V.

We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the .

Elsevier B.V ↗

use of cookies

Scopus

Source details

Lubrication Science

Scopus coverage years: from 1988 to Present Publisher: Wiley-Blackwell

ISSN: 0954-0075 E-ISSN: 1557-6833

Subject area:

Materials Science: Materials Chemistry Materials Science: Surfaces, Coatings and Films

View all documents

▻

Set document alert Journal Homepage

CiteScore 2018

1.69 ^

SJR 2018

0.590 ^

SNIP 2018

0.970 ^

CiteScore CiteScore rank & trend CiteScore presets Scopus content coverage

Calculated using data from 30 April, 2019

CiteScore

*CiteScore includes all available document types

1.69

⁼

 Citation Count 2018  Documents 2015 -

2017*

=

Metrics displaying this icon are compiled according to , a collaboration between industry and academia.

2018

^

▻ 176 Citations

▻ 104 Documents

▻

View CiteScore methodology CiteScore FAQ

▻

Last updated on 08 July, 2019

CiteScoreTracker 2019

1.16

⁼

 Citation Count 2019  Documents 2016 - 2018

=



Updated monthly

117 Citations to date ▻ 101 Documents to date ▻

↗

Snowball Metrics

CiteScore rank

Category Rank Percentile

Materials Science  

#109/271 59th

 

Materials Science  

#49/116 58th

 



Materials Chemistry

Surfaces, Coatings and Films

▻

View CiteScore trends

🔗

Add CiteScore to your site

About Scopus

What is Scopus Content coverage Scopus blog Scopus API Privacy matters

Language

⽇本語に切り替える 切换到简体中文 切換到繁體中文 Русский язык

Customer Service

Help Contact us

Copyright © . All rights reserved. Scopus® is a registered trademark of Elsevier B.V.

We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the .

Terms and conditions ↗ Privacy policy ↗ Elsevier B.V ↗

use of cookies

8/5/2019 15576833 (595×783)

https://onlinelibrary.wiley.com/cover/15576833 1/1

8/5/2019 Lubrication Science

https://onlinelibrary.wiley.com/page/journal/15576833/homepage/editorialboard.html 1/3

Advertisement

EDITOR Mitjan Kalin

Laboratory for Tribology and Interface Nanotechnology

Faculty of Mechanical Engineering University of Ljubljana

Slovenia

EDITOR EMERITUS Carl E. Snyder, Jr

Air Force Research Laboratory Dayton, Ohio

USA

H. A. Spikes

Imperial College, University of London UK

EDITORIAL BOARD

Koshi Adachi Tohoku University Japan

Pranesh Aswath University of Texas USA

Scott Bair

Georgia Institute of Technology

US

Wilfried J Bartz

Technische Akademie Esslingen Germany

Benyebka Bou-Said INSA-Lyon

France

Philippa Cann Imperial College UK

Mike Chandross

Sandia National Laboratories US

Enrico Ciulli University of Pisa Italy

Fabrice Dassenoy Ecole Centrale de Lyon France

Patrick De Baets

Ghent University Donfeng Diao

Xi'an Jiaotong Nicole Doerr

AC2T research GmbH

8/5/2019 Lubrication Science

https://onlinelibrary.wiley.com/page/journal/15576833/homepage/editorialboard.html 2/3

Belgium University

China

Austria

Rob Dwyer-Joyce University of She eld UK

Ali Erdemir Argonne National Laboratory US

George R Fenske Argonne National Laboratory US

Luis Ferreira University of Porto Portugal

Friedrich Franek Vienna University of Tribology

Austria

Lois J Gschwender US Air Force

US

Tabassumul Haque

ExxonMobil Research and Engineering US

Tomoko Hirayama Doshisha University Japan

Sta an Jacobson Uppsala University Sweden

Roland Larsson

Lulea University of Technology Sweden

Hong Liang

Texas A&M University US

Piet Lugt

SKF Engineering and Research Centre Netherlands

Jean Michel Martin ECL LTDS

France

Ichiro Minami Iwate University Japan

Clotilde Minfray Ecole Centrale de Lyon France

Ardian Morina University of Leeds UK

Daniel Nelias INSA Lyon France

Somuri Prasad Sandia National Laboratories US

M. Clelia Righi

University of Modena and Reggio Emilia Italy

Leslie R Rudnick Ultrachem Inc.

US

Greg Sawyer University of Florida US

Tom Scharf

The University of North Texas US

Dik Schipper

University of Twente Netherlands

Nic Spencer ETH Zurich Switzerland

Joichi Sugimura Kyushu University Japan

Victoria van Camp SKF Lubrication Systems

US

8/5/2019 Lubrication Science : Vol 29 , No 3

https://onlinelibrary.wiley.com/toc/15576833/2017/29/3 1/3

Advertisement



Free Access

Volume 29, Issue 3

Pages:  131-199 April 2017

Previous | Next^

Issue Information

Issue Information

Pages: 131-132 First Published: 16 March 2017 Abstract PDF Request permissions

Research Articles ‐ LS

An analytical approach on the tribological behaviour of pocketed slider bearings with An analytical

boundary slip including cavitation

M. Muchammad, Mohammad Tauviqirrahman, J. Jamari, Dirk Jan Schipper Pages: 133-152 First Published: 07 November 2016

Abstract Full text PDF References Request permissions



GO TO SECTION

8/5/2019 Lubrication Science : Vol 29 , No 3

https://onlinelibrary.wiley.com/toc/15576833/2017/29/3 2/3



Open Access

In uence of surface texture shape, geometry and orientation on hydrodynamic lubrication performance of plane‐to‐plane slider surfaces

M. S. Uddin, Tom Ibatan, S. Shankar

Pages: 153-181 First Published: 18 November 2016

Abstract Full text PDF References Request permissions

Optimising the design of textured surfaces for reducing lubricated friction coe cient Javier Echávarri Otero, Eduardo de la Guerra Ochoa, Irene Bellón Vallinot, Enrique Chacón Tanarro Pages: 183-199 First Published: 10 November 2016

Abstract Full text PDF References Request permissions

 Submit an article

 Browse sample issue

 Get Content alerts

 Recommend to a librarian

 Subscribe to this journal

More from this journal Special Issues

To Our Authors Newsletter LaTex Class File

Jobs

About Wiley Online Library

Privacy Policy Terms of Use

Cookies

Accessibility