Your Manuscript (GJETA-2022-0055) is submitted to Global Journal ofEngineering and Technology Advances (GJETA) 2 pesan

(1)

Email Universitas Mataram - Your Manuscript (GJETA-2022-0055) is submitted to Global Journal of Engineering and Technol…

https://mail.google.com/mail/u/0/?ik=3e60e4bd7d&view=pt&search=all&permthid=thread-f%3A1727112300970884001&simpl=msg-f%3A1727112… 1/1 I Gede Bawa Susana <[email protected]>

Your Manuscript (GJETA-2022-0055) is submitted to Global Journal of Engineering and Technology Advances (GJETA)

2 pesan

Editor GJETA <[email protected]> 3 Februari 2022 00.30

Kepada: [email protected]

Dear Author,

Greetings for the day...

Your manuscript entitled "Conversion of LDPE and PP plastic waste into fuel by pyrolysis method" has been received to “Global Journal of Engineering and Technology Advances (GJETA)”. Manuscript number assigned to your manuscript is GJETA-2022-0055. Use this reference number in the future communications. Also, you will be able to check the status of your submitted manuscript by logging manuscript number and corresponding author’s email id in Track manuscript form of Global Journal of Engineering and Technology Advances (GJETA) website.

http://gjeta.com/content/track-manuscript-status If you need more information, feel free to contact us.

With Best Regards, Managing Editor

Global Journal of Engineering and Technology Advances (GJETA) [email protected]

Editor GJETA <[email protected]> 3 Februari 2022 00.31

Kepada: [email protected] Cc: [email protected]

[Kutipan teks disembunyikan]

(2)

https://mail.google.com/mail/u/0/?ik=3e60e4bd7d&view=pt&search=all&permthid=thread-f%3A1727627892709140536&simpl=msg-f%3A172762… 1/2

I Gede Bawa Susana <[email protected]>

Editorial decision on your Manuscript (GJETA-2022-0055): accepted for further publication process after initial editorial review

3 pesan

Editor GJETA <[email protected]> 18 Maret 2022 17.05

Balas Ke: [email protected] Kepada: [email protected] Cc: [email protected]

Dear Author,

We are pleased to inform you that your manuscript (Manuscript ref. no. GJETA-2022-0055) entitled "Conversion of LDPE and PP plastic waste into fuel by pyrolysis method" is approved for further publication process after initial editorial review.

In order to proceed for publication of your manuscript as fast as possible, follow the below steps

1) Provide Author’s Declaration form (If not submitted earlier) and Author's name details. Your article cannot be published until the publisher has received the appropriate signed Author’s Declaration form and filled Author’s name details form (Download both forms from website. http://gjeta.com/content/downloads)

2) Make the payment of Article processing charges: within seven working days after receipt of this e-mail using as details given below

A] Online payment through RazorPay: Using debit cards, or credit cards or Razorpay log in credential.

Amount payable through RazorPay is Total USD 32.00 (USD Thirty two only) [ Article processing fee (USD 30.00) + Transaction charges (USD 2.00)]

Click on link and follow instructions: https://rzp.io/l/2YEZ7X2

B] Online payment through PayPal: Using PayPal log in credential, debit cards, or credit cards.

Amount payable through RazorPay is Total USD 32.00 (USD Thirty two only) [ Article processing fee (USD 30.00) + Transaction charges (USD 2.00)]

Click on below link and follow instructions: https://gjeta.com/content/paypal

Author must e-mail copy of Payment details (Transaction ID) along with details involving Name of corresponding author, e-mail of corresponding author, manuscript number and Title of the manuscript to the editor of Global Journal of Engineering and Technology Advances (GJETA) at [email protected].

Please be aware that your manuscript can not be published until all above steps are followed.

If you need more information, feel free to contact us.

I Gede Bawa Susana <[email protected]> 18 Maret 2022 19.07

Kepada: [email protected]

Dear Editor

We have paid the publica on fee with the following details:

1. Manuscript ref. no.

GJETA-2022-0055

2. Entitled: Conversion of LDPE and PP plastic waste into fuel by pyrolysis method 3. Author: 1. Ida Bagus Alit; 2. I Gede Bawa Susana

3. Payment Id: 684228646596320

We also send proof of payment; Author’s Declaration form; and Author’s name details form (attached file).

Email Universitas Mataram - Editorial decision on your Manuscript (GJETA-2022-0055): accepted for further publication proc…

(3)

3/22/22, 8:43 AM Email Universitas Mataram - Editorial decision on your Manuscript (GJETA-2022-0055): accepted for further publication proc…

Thank you Best Regards,

3 lampiran

PayPal - payment of Article-GJETA-2022-0055.pdf 191K

GJETA-Authors Declaration form-I Gede Bawa Susana.pdf 646K

GJETA Author's name details.docx 14K

[email protected] <[email protected]> 19 Maret 2022 17.58

Kepada: I Gede Bawa Susana <[email protected]>

Dear author, Greetings…

Your message is well noted. We received details of payment of article processing charges. Very soon we will send you author proof for final check and correction.

Thanks and regards, Editor

(4)

GJETA-2022-0055 Article proof for final check and approval

1 pesan

Dear Author,

We are grateful for your association with us. Please find herewith attached final edited version (as a word file) of your manuscript (ref no. GJETA-2022-0055) entitled "Conversion of LDPE and PP plastic waste into fuel by pyrolysis method" which is accepted for publication in Global Journal of Engineering and Technology Advances (GJETA).

Download Author proof copy of your manuscript: https://gjeta.com/sites/default/files/Attached%

20Files/GJETA-2022-0055%2...

Download Author query form: https://gjeta.com/content/downloads Special Note:

Without this we will not able to process your manuscript further.

1.

Provide the name(s) of authors as First Name (Given name)-Middle Name- Last name (Family name/Surname) for each author and check that all names are accurately spelled. It is important from Indexing purpose.

2.

While writing numerical results in table author should use decimal point instead of comma.

3.

Mention the X-axis and Y-axis title (label) in the figure.

4.

Instead of writing lower case “o” in superscript; degree Celsius unit “℃” from symbols. Ex. “8 ^oC” by “8

℃”. Similarly check and correct the same throughout the manuscript.

5.

While citation of reference in text, do not use reference number at the beginning of a sentence. Ex.

“This result is by [10, 13] …….. gasoline fuel”. For example: The actual authors should be referred to, but the reference number(s) must always be given. e.g., “This result is by [Name of Author]…..

gasoline fuel [Reference 10, 13]".

6.

In the reference section, highlighted references are not provided in detail, author should write this reference appropriately and complete.

7.

Ensure that, all the references appearing in the text should be enlisted at the end in reference section and vice versa.

8.

References should be cited in the text, strictly as per author’s guideline provided in the Journal’s website. Similarly, references in reference section should be written as per reference format (Vancouver style) given in instruction to authors on journal web site.

We hereby request you that,

1. Read the proof at least thrice, note the errors and make necessary corrections (in blue colored text) to make the manuscript error free.

2. Do not change the format of the word file, just check the spelling and other errors in the attached text part.

3. Use this proof for checking the typesetting, editing, completeness and correctness of the text, tables and figures.

4. Significant changes to the article will only be considered at this stage with permission from the Editor.

5. Make sure that you send final approved copy of article proof along with duly filled Author proof form within 3 days after receipt of this e-mail.

6. Your manuscript will not be further processed for publication until and unless we receive your final approved article proof and Author query form.

7. It is responsibility to author to check each and every word and spelling including italic and normal formatting of specific names. No changes will be accepted after this. If any changes are expected after publication of manuscript, author will have to pay charges accordingly.

We would appreciate to receive your corrected proof as a word file by e-mail within stipulated time period so that we can process your article quickly and efficiently.

Thank you for submitting your work to this journal.

Email Universitas Mataram - GJETA-2022-0055 Article proof for final check and approval

(5)

3/22/22, 8:40 AM Email Universitas Mataram - GJETA-2022-0055 Article proof for final check and approval

If you need more information, please do not hesitate to contact us.

(6)

Your Manuscript (GJETA-2022-0055) has been published in Volume 10 - Issue 3 (March 2022) of Global Journal of Engineering and Technology Advances

(GJETA).

1 pesan

Dear Author,

We are pleased to inform you that your manuscript entitled "Conversion of LDPE and PP plastic waste into fuel by pyrolysis method" has been published in Volume 10 - Issue 3 (March 2022) of Global Journal of Engineering and Technology Advances (GJETA).

You can view or download your article from the below links

https://gjeta.com/content/conversion-ldpe-and-pp-plastic-waste-fuel-pyro...

https://gjeta.com/sites/default/files/GJETA-2022-0055.pdf

Crossref DOI and CrossMark metadata information will be updated very soon. We will inform you regarding this.

I hope you are satisfied with our service and have good experience while publishing with us. We will be happy to review and publish you next manuscript in this journal. You may also consider our other allied journals…

World Journal of Advanced Engineering Technology and Sciences https://wjaets.com/

GSC Advanced Engineering and Technology https://gsconlinepress.com/journals/gscet/

We will look forward to the submission of your next manuscripts.

Email Universitas Mataram - Your Manuscript (GJETA-2022-0055) has been published in Volume 10 - Issue 3 (March 2022)…