PATIMBAN PORT ADDITIONAL HIGHMAST LAMPS PROJECT
INSTALLATION METHODE
HIGHMAST LIGHTING
1. OVERVIEW OF THE SYSTEM
YARD LIGHTING SYSTEM
ADDITIONAL LIGHTING SIMULATION 3. OPERATING THE EQUIPMENT
OPERATING THE HIGH MAST POLE
WORKING AREA COVERAGE
PANEL BOX HIGH MAST
LAMPS INSTALLATION
AIMING HIGH MAST LIGHTING SYSTEMINSTALLATION METHODE :
2. INTRODUCTION OF THE MAIN EQUIPMENT
LEGEND:
: High Mast Lighting System Existing
: High Mast Lighting System Additional
PATIMBAN PORT ADDITIONAL HIGHMAST LAMPS PROJECT
GENSET 650KVA, 0.4KV
G
TR 1250KVA
LIGHTING SYSTEM POWER SUPPLY
LVSB‐AD (LVMDB)
MDB‐LT.1 MDB‐LT.2 MDB‐LT.3
HMP 1.1 HMP 5.1 HMP 2.3
HMP 3.1
HMP 5.2 HMP 2.3
HMP 2.1
HMP 3.2 HMP 5.3 HMP 4.1
HMP 1.2
HMP 5.4 HMP 4.2
ADMIN AREA STREET LIGHTS
(8 NOS) UTILITY AREA
STREET LIGHTS (6 NOS)
FEGLP‐
OMLP‐
LVDB LVDB EF
LVDB CD LVDB B
A LVSB‐XR
C A P
N P
P L N
A T S
E P MV‐SWGR
RMU‐AD
1. HIGH MAST LIGHTING SYSTEM
High Mast lighting system are ports main lighting system. It placed all over the port with determined number of lights and direction to cover the whole area. It has 35m height and numerous lighting fixtures installed on top of the high mast pole.
PATIMBAN PORT ADDITIONAL HIGHMAST LAMPS PROJECT
1. HIGH MAST LIGHTING SYSTEM
2. ADDITIONAL LIGHTING SIMULATION
PATIMBAN PORT ADDITIONAL HIGHMAST LAMPS PROJECT
LEGEND:
: New Additional Lamps Directions
: Existing Wide Lamps Directions
: Existing Narrow Lamps Directions
1.
Operating The High Mast Pole (OTHERS)
Ensure to Check all the locking
the cable so it will not entangled
Lower until all support holds the ring safely
Lower the ring carefully while arranging
Install Ring Support
Turn OFF all sub mcb except for motor
Take off socket Clear Surround Area before lowering plug inside HMP
Lower the ring using provided remote
2.
Working Area Coverage
PATIMBAN PORT ADDITIONAL HIGHMAST LAMPS PROJECT
3.
Panel Box High Mast
Each Grouping Should be Enough for Additional 1 or 2 set Lamps but In Case We Spare 1 set MCB 20 Ampere
PATIMBAN PORT ADDITIONAL HIGHMAST LAMPS PROJECT 4.
Lamps Installation
Additional Lamps can be mounted using scaffolding with wheels approx. 2 layers about 3 meters height
New Type Panasonic Lamps will be mounted using : 1. Mounted Direct Drill & Mounting using Nut & Bolt
15 cm Galvanized
2. NYM 3x4mm2 Cable c/w Flexible Conduit
Following Lighting Simulation Each Pole Each Ring
Aiming Process still using Scaffolding c/w Wheels & Following from Lighting Simulations Coordinate One By One during Day Light Work Hours
4. Aiming High Mast Lighting System
PATIMBAN PORT ADDITIONAL HIGHMAST LAMPS PROJECT