OPTIMIZATION WARPAGE DEFECT OF THE PENCIL BOX Page 96 of 119 USING FINITE ELEMENT ANALYSIS AND ARTIFICIAL NEURAL NETWORK
Eko Ari Wibowo REFERENCES
Arbib, M. A. (2015). The Handbook of Brain Theory and Neuron Network (M. A.
Arbib (ed.); 2nd Editio, Vol. 1). The MIT Press.
Astra Manufacturing Polytechnic. (2019). Documentation of Mechanical Engineering Department.
Braun, D. (2004). Poly(vinyl chloride) on the Way from the 19th Century to the 21st Century. Journal of Polymer Science, Part A: Polymer Chemistry, 42(3), 578–
586. https://doi.org/10.1002/pola.10906
Bryce, D. M. (1996). Plastic Injection Molding Fundamentals: Vol. I (p. 282).
Butler, C. (1992). A Primer on The Taguchi Method. In Computer Integrated Manufacturing Systems (Vol. 5, Issue 3, p. 246). https://doi.org/10.1016/0951- 5240(92)90037-d
Callister, W. D. (2007). Materials Science and Engineering : An Introduction (Seventh Ed). John Wiley & Sons, Inc. https://doi.org/10.1007/BF01184995 Chauvin, Y., & Rumelhart, D. E. (1995). Backpropagation Theory, Architectures, and
Applications (Y. Chauvin & D. E. Rumelhart (eds.)). Lawrence Erlbaum Associates. http://library1.nida.ac.th/termpaper6/sd/2554/19755.pdf
Dutta, A. (2021). Crossover in Genetic Algorithm - GeeksforGeeks. Geeks for Geeks, 1–7. https://www.geeksforgeeks.org/crossover-in-genetic-algorithm/
ExxonMobil. (2010). Product Datasheet - ExxonMobil TM PP7555KNE2
(Polypropylene Impact Copolymer Hardness). https://doi.org/PP7555KNE2 Fischer, J. M. (2012). Handbook of Molded Part Shrinkage and Warpage: Second
Edition. In Handbook of Molded Part Shrinkage and Warpage: Second Edition.
https://doi.org/10.1016/C2011-0-06800-X
Hristev, R. M. (1998). The ANN Book (1st Editio). GNU Public License, ver. 2.
Hwa Chin Machinery Factory Co., L. (2020). Manual book injection machine Hwa Chin 1600SE.
Jain, L., & Fanelli, A. M. (2000). Recent Adventages in Artificial Neural Network Design and Applications. CRC Press.
OPTIMIZATION WARPAGE DEFECT OF THE PENCIL BOX Page 97 of 119 USING FINITE ELEMENT ANALYSIS AND ARTIFICIAL NEURAL NETWORK
Eko Ari Wibowo Kim, P. (2017). MATLAB Deep Learning: With Machine Learning, Neural Networks
and Artificial Intelligence. In Library of Congress Control Number.
Kora, P., & Yadlapalli, P. (2017). Crossover Operators in Genetic Algorithms: A Review. International Journal of Computer Applications, 162(10), 34–36.
https://doi.org/10.5120/ijca2017913370
Koutromanos, I. (2018). Fundamentals of Finite Element Analysis - Linier Finite Element Analysis. John Wiley & Sons Ltd.
Kramer, O. (2017). Genetic Algorithm Essentials. In Springer International
Publishing AG (Vol. 679). Springer. https://doi.org/10.1007/978-3-319-52156-5 Krenker, A., Bes?ter, J., & Kos, A. (2011). Introduction to the Artificial Neural
Networks. In Artificial Neural Networks-Methodological Advances and Biomedical Applications. https://doi.org/10.5772/15751
Kurt, M., Kaynak, Y., Kamber, O. S., Mutlu, B., Bakir, B., & Koklu, U. (2010).
Influence of molding conditions on the shrinkage and roundness of injection molded parts. International Journal of Advanced Manufacturing Technology, 46(5–8), 571–578. https://doi.org/10.1007/s00170-009-2149-x
Kurtaran, H., & Erzurumlu, T. (2006). Efficient warpage optimization of thin shell plastic parts using response surface methodology and genetic algorithm.
International Journal of Advanced Manufacturing Technology, 27(5–6), 468–
472. https://doi.org/10.1007/s00170-004-2321-2
Kurtaran, H., Ozcelik, B., & Erzurumlu, T. (2005). Warpage optimization of a bus ceiling lamp base using neural network model and genetic algorithm. Journal of Materials Processing Technology, 169(2), 314–319.
https://doi.org/10.1016/j.jmatprotec.2005.03.013
Malloy, R. A., & Malloy, R. A. (2010). Plastic Part Design for Injection Molding. In Plastic Part Design for Injection Molding.
https://doi.org/10.3139/9783446433748.fm
MoldFlow Adviser, A. (2018). Report Analysis MoldFlow of Pencil Box.
Oktem, H., Erzurumlu, T., & Uzman, I. (2007). Application of Taguchi optimization technique in determining plastic injection molding process parameters for a thin- shell part. Materials and Design, 28(4), 1271–1278.
https://doi.org/10.1016/j.matdes.2005.12.013
OPTIMIZATION WARPAGE DEFECT OF THE PENCIL BOX Page 98 of 119 USING FINITE ELEMENT ANALYSIS AND ARTIFICIAL NEURAL NETWORK
Eko Ari Wibowo Oliaei, E., Heidari, B. S., Davachi, S. M., Bahrami, M., Davoodi, S., Hejazi, I., &
Seyfi, J. (2016). Warpage and Shrinkage Optimization of Injection-Molded Plastic Spoon Parts for Biodegradable Polymers Using Taguchi, ANOVA and Artificial Neural Network Methods. Journal of Materials Science and
Technology, 32(8), 710–720. https://doi.org/10.1016/j.jmst.2016.05.010
Rosato, D. V., Rosato, D. V., & Rosato, M. G. (2000). Injection Molding Handbook (Third Edit). Kluwer Academic Publishers 101.
Rosato, D. V., Rosato, D. V., & Rosato, M. V. (2004). Plastic Product Material and Process Selection Handbook. In Plastic Product Material and Process Selection Handbook (Issue September). https://doi.org/10.1016/B978-1-85617-431- 2.X5000-2
Roy, R. K. (2010). A Primer on The Taguchi Method (E. J. Kehoe (ed.); 2nd Editio).
Society of Manufacturing Engineers.
Sadeghi, B. H. M. (2000). BP-neural network predictor model for plastic injection molding process. Journal of Materials Processing Technology, 103(3), 411–416.
https://doi.org/10.1016/S0924-0136(00)00498-2
Salamoni, T. D., & Wahjudi, A. (2018). Injection molding process modeling using back propagation neural network method. AIP Conference Proceedings, 1983.
https://doi.org/10.1063/1.5046266
Sánchez, R., Aisa, J., Martinez, A., & Mercado, D. (2012). On the relationship
between cooling setup and warpage in injection molding. Measurement: Journal of the International Measurement Confederation, 45(5), 1051–1056.
https://doi.org/10.1016/j.measurement.2012.01.039
Siang, J. J. (2005). Jaringan Syaraf Tiruan dan Pemrogramannya Menggunakan Matlab (Edisi Pert). Andi Publisher.
Taguchi, G., Chowdhury, S., & Wu, Y. (2005). Taguchi’s Quality Engineering Handbook. In S. Taguchi & H. Yano (Eds.), Taguchi’s Quality Engineering Handbook. John Wiley & Sons, Inc.
Taguchi, G., & Jugulum, R. (2002). The Mahalanobis-Taguchi Strategy: A Pattern Technology System. John Wiley & Sons, Inc. https://doi.org/2002003927 Wibowo, E. A., Syahriar, A., & Kaswadi, A. (2020). Analysis and Simulation of
Short Shot Defects in Plastic Injection Molding at Multi Cavities. ICONETSI:
OPTIMIZATION WARPAGE DEFECT OF THE PENCIL BOX Page 99 of 119 USING FINITE ELEMENT ANALYSIS AND ARTIFICIAL NEURAL NETWORK
Eko Ari Wibowo International Conference on Engineering and Information Technology for
Sustainable Industry, 1–6. https://doi.org/10.1145/3429789.3429837
Wijaya, H. (2017). Teknologi Pengolahan Plastik Injection Molding (Versi e-Bo).
Yen, C., Lin, J. C., Li, W., & Huang, M. F. (2006). An abductive neural network approach to the design of runner dimensions for the minimization of warpage in injection mouldings. Journal of Materials Processing Technology, 174(1–3), 22–
28. https://doi.org/10.1016/j.jmatprotec.2005.02.233
Yin, F., Mao, H., & Hua, L. (2011). A hybrid of back propagation neural network and genetic algorithm for optimization of injection molding process parameters.
Materials and Design, 32(6), 3457–3464.
https://doi.org/10.1016/j.matdes.2011.01.058
Yin, F., Mao, H., Hua, L., Guo, W., & Shu, M. (2011). Back Propagation neural network modeling for warpage prediction and optimization of plastic products during injection molding. Materials and Design, 32(4), 1844–1850.
https://doi.org/10.1016/j.matdes.2010.12.022
Zienkiewicz, O. C., Taylor, R. L., & Zhu, J. Z. (2013). The Finite Element Method - Its Basis & Fundamentals (Seventth E). Butterworth-Heinemann.