DAFTAR PUSTAKA
Hj. Rezky Anisari. (2018). PERHITUNGAN PRODUKTIVITAS BULLDOZER PADA AKTIVITAS DOZING DI PT.PAMPERSADA NUSANTARA TABALONG KALIMANTAN SELATAN. Jurnal INTEKNA, 18(ISSN 2443-1060 (Online)), 12.
Lui, H. A. I., Noult, A. U. N., & Mulut, M. A. I. (2018). TRACK ROLLER ASSEMBLY AND METHODE.
Maulana, I., & Ibrahim, A. (2017). Analisa Kerusakan Komponen Undercarriage Exavator Hitachi EX200 PADA PT. TAKABEYA PERKASA GROUP DENGAN METODE FMEA. JURNAL MESIN SAINS, 1(1), 8.
https://www.researchgate.net/publication/324780211%0AANALISA Prakash, J. (2010). A REVIEW ON EFFECT OF PREHEATING AND / OR
POST WELD HEAT TREATMEMT ( PWHT ) ON MECHANICAL BEHAVIOUR OF. International Journal of Engineering Science and Technology, 2(4), 625–631.
Reynolds, A. P., Tang, W., Khandkar, Z., Khan, J. A., & Lindner, K. (2005).
Relationships between weld parameters , hardness distribution and
temperature history in alloy 7050 friction stir welds. Science and Technology of Welding & Joining, April. https://doi.org/10.1179/174329305X37024 Rouns, T. N., Moore, D. J., & Rouns, T. N. (1985). The Effect of Heat Treatment
, Mechanical Deformation , and Alloying Element Additions on the Rate of Bainite Formation in Austempered Ductile Irons. AMERICAN SOCIETY FOR METALS, 4(1), 4–5.
Suehiro, M., Sato, K., Tsukano, Y., Yada, H., Senuma, T., & Umura, Y. M.
(1987). Computer Modeling of Microstructural Change and Strength of Low Carbon Steel in Hot Strip Rolling*. Nippon Steel Corporation, Tokai-Cho, 439(1), 7.
Venkata, K. A., Kumar, S., Dey, H. C., Smith, D. J., Bouchard, P. J., & Truman, C. E. (2014). Study on the effect of post weld heat treatment parameters on the relaxation of welding residual stresses in electron beam welded P91 steel plates. Procedia Engineering, 86(Grade 91), 223–233.
https://doi.org/10.1016/j.proeng.2014.11.032
Hasa, M. H. Al, Teknologi, P., Bakar, B., & Puspiptek, K. (2013). Pengaruh Temperatur Heat-Treatment terhadap Kekerasan dan Struktur Mikro Paduan Al-Fe-Ni. Jurnal Rekayasa Proses, 4(2), 51–55.
https://doi.org/10.22146/jrekpros.1891
Luthfianto, S., Suprayogi, Z. A., & Samyono, D. (2017). Pengaruh Variasi Media Quenching Terhadap Sifat Mekanis Rantai Elevator Fruit Kelapa Sawit. JST (Jurnal Sains Dan Teknologi), 6(1), 0–9. https://doi.org/10.23887/jst-
undiksha.v6i1.9396
Maulana, I., & Ibrahim, A. (2017). Analisa Kerusakan Komponen Undercarriage Exavator Hitachi EX200 PADA PT. TAKABEYA PERKASA GROUP DENGAN METODE FMEA. JURNAL MESIN SAINS, 1(1), 8.
https://www.researchgate.net/publication/324780211%0AANALISA Mohamad Faizal H, S. U. (2018). ANALISIS KEKUATAN DAN KUALITAS
SAMBUNGAN LAS DENGAN VARIASI PENDINGINAN OLI DAN UDARA PADA MATERIAL ASTM A36 DENGAN PENGUJIAN NDT (NON DESTRUCTIVE TEST). Journal Institut Sains Dan Teknologi Nasional, 14(BINA TEKNIKA), 8.
Yada, H. (2018). Fungsi Alat Berat Alat berat terdiri dari beberapa fungsi diantaranya _ - Alat Pengolah Lahan. Jurnal Ilmiah MEDIA