Judul Karya Ilmiah: CFD analysis of the aerodynamic characteristics of the Jakarta-Bandung high-speed train. Judul Prosiding: MATEC Web of Conferences Volume 159, 2018 The 2nd International Joint Conference on Advanced Engineering and Technology (IJCAET 2017) and the International Symposium on Advanced Mechanical and Power Engineering (ISAMPE 2017). MATEC Web of Conferences Volume 159, 2018 atau The 2nd International Joint Conference on Advanced Engineering and Technology (IJCAET 2017) and the International Symposium on Advanced Mechanical and Power Engineering (ISAMPE 2017) termasuk proiding international terindeks scopus.
CFD analysis of the aerodynamic characteristics of the high-speed train Jakarta-Bandung (Conference Paper) (Open Access). Department of Mechanical Engineering, Faculty of Engineering, Diponegoro University, Indonesia College of Mechanical Engineering, Diponegoro University, Indonesia. The speed of the train in this simulation was varied from 100 km/h to a maximum design speed of 350 km/h with an increment of 30 km/h.
The pressure acting on this location increases as train speed increases. 350 km/h CFD analysis Computation domains High pressure area High speed train (HST) Jakarta K omegas Train speed. 2nd International Joint Conference on Advanced Engineering and Technology, IJCAET 2017 and International Symposium on Advanced Mechanical and Power Engineering, ISAMPE 2017; Bali;.
Numerical simulation of the effects of obstacle deflectors on the aerodynamic performance of stationary high-speed trains at two yaw angles.
SCIENTIFIC COMMITTEE
Dr. Bagus Hario Setiadji – UNDIP (Chair)
Members
1 International Joint Conference on Advanced Engineering and Technology
IJCAET – 45 MANUFACTURE AND CHARACTERIZATION OF FISH COLLAGEN/ALGINATE-BASED SCAFFOLDS CONTAINING CHITOOLIGOSACCHARIDES FOR SKIN TISSUE PRODUCTION. IJCAET – 56 CHARACTERISTICS OF LATERITIC NICKEL MINERALIZATION IN THE CENTRAL PART OF THE MADANG AND SERAKAMAN AREAS, SEBUKU ISLAND, SOUTH KALIMANTAN. IJCAET – 108 DEVELOPMENT OF SEISMIC RISK MICROZONING MAP FOR SEMARANG SEMARANG IS UNDERGOING FAULT EARTHQUAKE SCENARIO WITH MAXIMUM MAGNITUDE 6.9 MW.
IJCAET – 116 FINITE ELEMENT ANALYSIS OF BELLOWS FOR METAL EXPANSION JOINTS Doo-Hyung Jeong, Byung-Tak Kim, In-Pil Kang, Chan-Jung Kim and Sung-Wi Koh. IJCAET – 117 THE INFLUENCE OF VARIATIONS OF THE WELDING SPEED OF GMAW ON THE MECHANICAL PROPERTIES OF AUSTENITIC STEEL AISI 316L. IJCAET – 131 A HEURISTIC ALGORITHM FOR A VEHICLE ROUTING PROBLEM WITH DELIVERY AND COLLECTION OF MULTIPLE INDUSTRIAL GAS CONTAINERS.
IJCAET – 136 AN APPLICATION FROM AHP FOR THE SELECTION OF LNG FEEDER CAR TYPE FOR 1000TEU CLASS CONTAINER SHIP & 50K TANKER. IJCAET – 145 THE EFFECT OF ACID LEACHING TIME IN THE MODIFICATION OF NATURAL ZEOLITE AS CATALYST FOR TOLUENE STEAM REFORMING. IJCAET – 146 AN INVESTIGATION OF SPATIAL ARRANGEMENT, FORM AND STRUCTURAL SYSTEM OF TRADITIONAL HOUSES IN PEDAWA INDIGENOUS VILLAGE- BALI.
IJCAET – 147 DEVELOPMENT OF KEY PERFORMANCE INDICATORS (KPI) FOR SUSTAINABLE SUPPLY CHAIN MANAGEMENT (SSCM) PALM OIL INDUSTRY IN INDONESIA. IJCAET – 151 REVIEW OF SENSORS FOR REAL-TIME MONITORING AND CONTROL SYSTEMS IN MACHINE AND SURFACE FINISHING PROCESSES. IJCAET – 152 ANALYSIS OF THE IMPACT OF VOLCANIC ACTIVITY ON THE LOWER AND MIDDLE PART OF THE SENTOLO FORMATION, KULON PROGO USING THE PETROGRAPHIC METHOD.
IJCAET – 155 ANALYSIS OF THE IDENTIFICATION OF THE EFFECT OF A LANDSLIDE DISASTER USING AN UNAVAILABLE AIRCRAFT (UAV) AND GEOGRAPHIC INFORMATION SYSTEM (CASE STUDY: SUB DISTRICT . NGESREP, SEMARANG CITY). IJCAET – 156 DETECTION OF DENTAL SYSTEM DEFECTS USING WAVE DECOMPOSITION AND CROSS CORRELATION METHOD - EXPERIMENTS TO DEVELOP A FEASIBLE DETECTION METHOD. IJCAET – 158 PALEOECOLOGICAL ANALYSIS OF THE SENTOLO FORMATION BASED ON THE FOSSIL FORAMINIFERA ASSEMBLY FROM STRATIGRAPHIC CROSS-SECTION MEASUREMENTS AT PENGASIH, KULONPROGO, YOGYAKARTA.
IJCAET – 160 ORGANIC SOLAR CELLS APPLICATION OF SOLUTION PROCESSED BULK HETEROJUNCTION SMALL MOLECULES BASED ON benzothiadiazole derivatives. IJCAET – 164 INTEGRATION OF GREEN QUALITY FEATURES, MODULARITY AND LIFECYCLE ASSESSMENT TO SUSTAINABLE PRODUCT DESIGN.
A Review on Sensors for Real-time Monitoring and Control Systems on Machining and Surface
1 Introduction
IJCAET – 168 EXPERIMENTAL APPROACH TO TEST THE EFFICIENCY OF A DUAL-SOURCE HYBRID SOLAR COLLECTOR UNDER A QUASI-DYNAMIC TEST CONDITION. IJCAET – 172 DEVELOPMENT OF COOPERATION IN SUSTAINABLE AGRICULTURAL CLUSTER Tomy Perdana, Fernianda Rahayu Hermiatin and Tetep Ginanjar. Chang Kyu Kim, Huy Hung Nguyen, Dae Hwan Kim, Hak Kyeong Kim and Sang Bong Kim IJCAET - 179 SERVO CONTROLLER DESIGN AND ERROR DETECTION ALGORITHM FOR SPEED.
IJCAET – 182 MODELING AND ANALYSIS OF THE EFFECT OF UNBALANCED MOMENT DIRECTIONS ON THE BEHAVIOR OF EDGE COLUMN-FLAT CONNECTIONS. IJCAET – 184 A STUDY CHIP FORMING OF COMMERCIAL STEEL MATERIALS AT LOW SPEED WORKST. CYLINDRICAL GRINDING. IJCAET – 189 MEASUREMENT OF DAMAGE RATE ON FISH SHOT AND COMPARISON BY L*A*B* AND HSV COLOR SPACE BASED APPROACH.
Minh Thien Tran, Jotje Rantung, Trong Hai Nguyen, Hak Kyeong Kim and Sang Bong Kim IJCAET – 193 MECHANICAL DESIGN AND MODELING OF A TORBET ROBOT FOR ARGENTINA. IJCAET – 195 SULFATE FOR LIQUID FLOW THROUGH THE TUBING SYSTEM IN PREPARATION OF MALIC ACID SCALING OF BARIUM. IJCAET – 200 DESIGN AND FABRICATION OF A TURNING FIXTURE FOR MEASURING TORSION STIFFNESS OF A TATA CAB CHASSIS.
IJCAET – 201 EFFECT OF VALUE CONGRUENCE, BRAND KNOWLEDGE, BRAND SOCIAL, BRAND WARMNESS, AND MEMORABLE BRAND EXPERIENCE ON CUSTOMER-BRAND IDENTIFICATION AND CUSTOMER LOYALTY. IJCAET – 202 SYNTHESIS OF BARIUM SULFATE IN THE VARIATION OF MIXING RATE, TEMPERATURE AND ADDITION CONCENTRATION. IJCAET – 204 SIMULATION AND ANALYSIS OF THE AIR-ELASTIC-GALPING-BASED PIEZOELECTRIC ENERGY STRESSOR USING FINITE ELEMENT METHOD AND COMPUTATIONAL FLUID DYNAMICS.
IJCAET – 208 EFFECTIVENESS ANALYSIS OF SOLAR SEAWATER DISTILLATION FOR FRESHWATER AND SALT PRODUCTION USING A PLATE COLLECTOR. IJCAET – 211 PRELIMINARY LABORATORY RESEARCH ON SELF-COLLIMATION OF SOUND CRYSTAL WITH HOLLOW-TYPE SECONDARY RESONANT SCATTER Putriana Husnul Khatimah, Iwan Yahya, Harjana Harjana and Ubaidillah Ubaidillah. IJCAET – 212 DEVELOPMENT OF A DURABLE SOUND DIFFUSER ELEMENT USING AN ASSEMBLY SLOTTED RESONATOR OBSERVED FROM PLASTIC GLASS.
Measurement of injury rate on fish skin and performance comparison based on L*A*B* and
IJCAET – 223 THE CHARACTERISTIC SURVEY OF THE BEHAVIOR OF PARKING USERS WITH REGARD TO LOCATION ACCESSIBILITY OF NON-COMMERCIAL ACTIVITY CENTER (CASE STUDY OFF STREET PARKING AT UPI). IJCAET – 233 FUZZY LOGIC BASED HIGH ENERGY EFFICIENT CLUSTERING HIERARCHY ROUTING PROTOCOL FOR WIRELESS SENSOR NETWORKS. IJCAET – 234 DESIGN AND CONSTRUCTION OF SPUD HOUSING FOR FLOATING DOCK Hasanudin St and Ardi Nugroho Yulianto.
IJCAET – 240 DEVELOPMENT OF RISK BASED STANDARDIZED STANDARDIZED WBS (WORK BREAKDOWN STRUCTURE) FOR QUALITY PLANNING OF TALL BUILDINGS. IJCAET - 252 CRITICAL SUCCESS FACTORS IN COLLABORATIVE DESIGN DEVELOPMENT BUILD A PROJECT TEAM TO IMPROVE PROJECT PERFORMANCE. IJCAET – 261 A STUDY ON THE EFFECT OF WORKSTATION DESIGN PARAMETERS ON ERGONOMIC PERFORMANCE USING A VIRTUAL PRODUCTION TOOL.
IJCAET – 263 ADOMIAN DECOMPOSITION METHOD FOR SOLVING INITIAL VALUE PROBLEMS OF ORDINARY DIFFERENTIAL EQUATIONS OF THE SECOND ORDER. IJCAET – 266 THE SPATIAL ANALYSIS FOR SELECTING A SUITABLE LOCATION FOR A DUMP Zaflis Zaim and Febby Asteriani. IJCAET – 290 MODAL ANALYSIS OF REPLICA BOSS-GAT DURING THE DEBURRING PROCESS IN THE AEROSPACE PRODUCTION INDUSTRY.
IJCAET – 294 PRACTICE OF PROCESSING UNSORTED SOLID WASTE FROM LANDFILL TO ECONOMIC BENEFITS: SEMARANG CITY, INDONESIA. IJCAET – 299 DEVELOPMENT OF INSTITUTIONAL FINANCING MODEL OF DEEP DISCOUNT BONDS AND LAND LEASE ON TOLL ROAD PROJECT. IJCAET – 307 MULTI-STAKEHOLDER SWOT ANALYSIS OF INDONESIA'S HOUSING BACKLOG Slamet Warsito, Jati Utomo Dwi Hatmoko and Rizal Z.
Setiawan, Teguh Prabowo, Ismoyo Haryanto dan M Munadi IJCAET – 310 FAKTOR PENENTU IMPLEMENTASI RANTAI PASOKAN HIJAU. IJCAET – 312 INVESTIGASI DESAIN MAGNET PERMANEN TERBANGUN ROTOR INTERNAL DAN EKSTERNAL UNTUK KENDARAAN LISTRIK HYBRID. IJCAET – 325 PREDIKSI MIGRASI POLLUTAN (PB) MELALUI SECTION LINER Purwono Purwono, Mochamad Arief Budihardjo dan Annisa Selfia Nugraheni.
Design studies of inner and outer embedded Permanent Magnet for hybrid electric vehicles
Oka Sudana, Darma Putra, Made Sudarma, Rukmi Sari Hartati dan Ryan Pradnya Prastika IJCAET - PROSES KOMPOSTING 353 DAUN DAN PENGARUH KANDUNGAN KUNING. Mochamad Arief Budihardjo, Purwono Purwono, Maulia Fatimah dan Endro Sutrisno IJCAET – 357 ANALISIS STRUKTURAL PENERAPAN REDUKSI PIPA GAS DALAM OPERASI. IJCAET – 358 DESAIN DAN SIMULASI KONTROL SUHU BERBASIS LOGIKA UNTUK PROSES PENCAMPURAN PADA KOLAM TERAPEUTIK.
IJCAET – 365 RENT RATES AND READY FOR REVIEW IN APARTMENT FOR RENT WITH LOW HOUSING CONDITIONS IN SEMARANG URBAN AREA. IJCAET – 367 EXPERIMENTAL DETERMINATION OF BIOMASS GASIFICATION RATE AND TEMPERATURE DISTRIBUTION IN DUAL CHAMBER CIRCULATION FLUIDIZED STATE REACTOR.
15 International Symposium on Advanced Mechanical and Power
Engineering (ISAMPE 2017) Submission Title
ISAMPE - 222 EFFECTS OF WELD OVERLAY GEOMETRY ON TENSILE SHEAR STRENGTH PERFORMANCE FOR ADVANCED HIGH STRENGTH STEEL. ISAMPE – 265 FATIGUE TESTING AND ASSESSMENT OF STRENGTH IN MULTI-TIME TENSION; WHY WE NEED FATIGUE TESTING. ISAMPE – 272 EFFECT OF SURFACE OXIDE FILM ON COOLANT SPRAY HEAT TRANSFER DURING BOILING ON STEEL PLATE.
ISAMPE – 274 PROPOSAL FOR AN ECO-AIR CONDITIONING SYSTEM BY WATER-COOLED HEAT PUMP AND SHALLOW GEOTHERMAL ENERGY EXCHANGE TECHNOLOGY. ISAMPE – 288 THERMAL ANALYSIS OF HEATING MODULE FOR GLOW PROCESS Daeseong Woo, Gunyoung Do, Byongguk Kim and Kyoungjoon Kim. ISAMPE – 360 THE EFFECT OF STONE-WALES DEFECT ON STRUCTURAL STABILITY IN SINGLE-WALL CARBON NANOTULES.
Fatigue Testing and Evaluation of Fatigue Strength under Multiaxial Stress State;
Why do we need fatigue testing?
