TRAINER MODUL PRAKTIKUM SISTEM KONTROL ( IMPLEMENTASI RANGKAIAN DIRECT ON LINE (DOL) DAN RANGKAIAN STAR DELTA PADA KONTROL MOTOR AC 3 PHASE )
Muhammad Auni Anshory
Program Studi Teknik Elektro, Fakultas Teknik
Universitas Islam Kalimantan Muhammad Arsyad Al Banjari Banjarmasin
Jl. Adhiyaksa No. 2, Kayu Tangi, Sungai Miai, Banjarmasin Utara, Kota Banjarmasin, Kalimantan Selatan 70123
E-mail : [email protected], 082352653725
ABSTRAK
Tujuan dari tugas akhir ini adalah membuat, merancang serta menganalisis rangkaian Direct On line (DOL) dan Star Delta untuk mengetahui bagaimana pengasutan dengan dua rangkaian tersebut sebagai Trainer Modul Praktikum Sistem Kontrol di Universitas Islam Kalimantan Muhammad Arsyad Al Banjari. Harapannya alat ini dapat digunakan mahasiswa Teknik Elektro untuk menunjang kegiatan praktikum yang berkaitan dengan praktikum Sistem Kontrol.
Trainer Modul Praktikum Sistem Kontrol ini juga dibuat dengan tiap-tiap modul terpisah dan dijadikan satu dalam Frame Slidding, sehingga memudahkan dalam penyusunan dan perancangan rangkaian kontrol. Pemasangan modul bisa diatur sesuai keinginan sehingga lebih memudahkan dalam mempelajari instalasi listrik. Dari banyak rangkaian kontrol yang ada, dalam tugas akhir ini rangkaian dibatasi pada pembahasan rangkaian Direct On Line (DOL) dan rangkaian Star Delta.
Hasil dari pengujian menunjukan Trainer Modul Praktikum Sistem Kontrol ini berfungsi dengan baik. Rangkaian Direct On Line dapat digunakan untuk pengasutan dengan daya motor tidak lebih dari 5 HP dan jika lebih maka akan terjadi peningkatan arus nominal sebesar enam kali arus nominal awalnya. Rangkaian Star Delta dapat digunakan untuk menurunkan peningkatan arus nominal hingga 33,33% untuk motor dengan daya di atas 5 HP.
Kata kunci : Trainer,, Modul Praktikum, Rangkaian direct on line (DOL), Rangkaian star delta
MODULE TRAINER PRACTICE OF CONTROL SYSTEM
(IMPLEMENTATION OF DIRECT ON LINE (DOL) CIRCUITS AND STAR DELTA CIRCUITS IN AC 3 PHASE MOTOR CONTROLS
ABSTRACT
The purpose of this thesis is to create, design and analyze the Direct On line (DOL) and Star Delta series to find out how to start with the two series as Trainer Practicum Control System Module at Kalimantan Islamic University Muhammad Arsyad Al Banjari. It is hoped that this tool can be used by Electrical Engineering students to support practicum activities related to the Control System practicum.
The Control System Practicum Trainer Module is also made with each module separate and put together in a Frame Slidding, making it easier to arrange and design a control circuit. The installation of modules can be arranged as desired so it makes it easier to learn electrical installations. From many existing control circuits, in this thesis the circuit is limited to the discussion of the Direct On Line (DOL) circuit and the Star Delta circuit.
The results of the test show that the Control System Practicum Module Trainer is functioning properly. The Direct On Line circuit can be used for starting with a motor power of no more than 5 HP and if it is more there will be an increase in nominal current of six times the initial nominal current. Star Delta circuit can be used to reduce the nominal current increase up to 33.33% for motors with power above 5 HP.
Keywords: Trainer ,, Practicum Module, Direct on line (DOL) circuit, star delta circuit
Daftar Pustaka
Sudaryana Siden I. Gede (2015). Pemanfaatan Relai Tunda Waktu dan Kontaktor Pada Panel Hubung Bagi (PHB) Untuk Praktek Penghasutan Starting Motor Star Delta. ISSN 0216- 3241: 135
Purba Arnold Jupiter, Tobing S.M.L Panusur (2014). Analisis Perbandingan Torsi Start dan Arus Start, Dengan Menggunakan Metode Pengasutan Autotrafo, Star Deltar dan DOL (Direct On Line) Pada Motor Induksi 3 Fasa. DTE FT USU. 6(1): 1-5.
Pradika Hendy, Moediyono (Oktober 2012-April 2013). Thermal Overload Relay Sebagai Pengaman Overload Pada Miniatur Gardu Induk Berbasis Programmable Logic Controller (PLC) CP1E-E40DR-A. Gema Teknologi. 17(2): 81-82.
Bunga Pefrianus (2015), Perancangan Sistem Pengendalian Beban Dari Jarak Jauh Menggunakan Smart Relay. E-Journal Teknik Elektro dan Komputer. 4(5): 66.
Putra Mala Sando Jefri, dkk (2016). Pembuatan Trainer Instalasi Motor 3 Phase. JUPITER (Jurnal Pendidikan Teknik Elektro). 1(2): 83-85
Teguh, Santoso. (2015). Pengembangan Unit Modul Trainer Praktik Instalasi Listrik Industri. TA.
UNY. Yogyakarta
Siswoyo. (2008). Teknik Listrik Industri Jilid 2. Jakarta : Direktorat Pembinaan Sekolah Menegah Kejuruan.
Amat Jaenudin (2011), Puslit Dikdasmen, Lemlit UNY
References
Sudaryana Siden I. Gede (2015). Utilization of Time Delay Relays and Contactors on the Sharing Panel (PHB) for the Practice of Starting Motor Star Delta. ISSN 0216-3241: 135
Purba Arnold Jupiter, Tobing S.M.L Panusur (2014). Comparative Analysis of Start Torque and Start Flow, Using the Autotrafo Starting Method, Star Deltar and DOL (Direct On Line) On a 3 Phase Induction Motor. DTE USU FT. 6 (1): 1-5.
Pradika Hendy, Moediyono (October 2012-April 2013). Thermal Overload Relay As A Safety Overload In Miniature Substation Based Programmable Logic Controller (PLC) CP1E- E40DR-A. Echoes of Technology. 17 (2): 81-82.
Bunga Pefrianus (2015), Designing a Load Control System Remotely Using a Smart Relay. E- Journal of Electrical and Computer Engineering. 4 (5): 66.
Putra Mala Sando Jefri, et al (2016). Making 3 Phase Motor Installation Trainer. JUPITER (Journal of Electrical Engineering Education). 1 (2): 83-85
Teguh, Santoso. (2015). Development of Industrial Electrical Installation Practice Trainer Module Units. TA. UNY. Yogyakarta
Siswoyo (2008). Industrial Electrical Engineering Volume 2. Jakarta: Directorate of Vocational Middle School Development.
Amat Jaenudin (2011), Dikdasmen Research Center, UNY Research Institute