WATTECH FWM Seawater Reverse Osmosis System

(1)

WATTECH

| PT.TIRTA SUMBER MAKMUR , PUP Sektor V Blok A 2 No. 22 Babelan Bekasi Phone : 62 21 – 88982788; 88871689 Fax : 62 21 – 88875099 Web : http://www.tsm.or.id / www.wattech.co.id - Email : [email protected] / [email protected]

WATTECH FWM Seawater Reverse Osmosis System

Teknologi pengolahan air asin dengan teknologi membran Reverse Osmosis (RO) atau Osmosa Balik banyak dipakai di banyak negara seperti Amerika, Jepang, Jerman dan Arab. Teknologi ini banyak dipakai untuk memasok kebutuhan air tawar bagi kota-kota tepi pantai yang langka sumber air tawarnya. Pemakai adalah kapal laut, industri farmasi, industri elektronika, dan rumah sakit. Tentu saja di Indonesia juga teknologi pengolahan air ini telah dipakai, bahkan oleh Kementrian Kelautan kita. Jika anda membutuhkan alat pengolahan air asin dengan teknologi membran Reverse Osmosis (RO) (Osmosa Balik / Osmosis Terbalik) silahkan Hubungi kami.

 Thin Film Composite Membranes

 FRP Membrane Housings

 Stainless Steel High Pressure Pump

 Stainless Steel Dampeners

 Permeate Flow Meter

 Low and High Pressure Shutoff Switches

 Stainless Steel Frame with Powder Coated Finish

 Stainless Steel Back Pressure Control

 5 Micron Sediment Filter and Housing

 Differential Gauge Showing Filter Life

 High Pressure Relief Valve

 Liquid Filled System Pressure Gauge

 Product TDS with Digital Display Readout

 Fresh Water Divert: Monitors Permeate Quality and diverts to drain if it falls below a pre-set set point

 Booster Pump and Raw Water Strainer

 Fresh Water Flush Module

 Installation Kit

WATTECH WRO FWM.W.25 H

STANDARD FEATURES :

 Booster Pump

 Low and high pressure switch

 On / Off With storage tank level

 Permeate TDS

 Water temperatur

 Operating Hours

 Fresh Water Flush

 Automatic Product Water Diversion

 3Pre treatment Lock out

1

DESIGN CRITERIAS :

 Permeate Quality ( TDS )

 water temperatur

 operating Hours

 Operating Status

 Alarm Condition

 Wattech Panel Control

 Remotre control Operation ( Optional )

(2)

WATTECH

Technical Features

& Price FWM.W.25 H :

2

(3)

WATTECH

WATTECH WRO FWM.W.40 H

Standard Features :

 316L SS chassis

 Conductivity meter on the production line

 Production flow meter

 Low pressure and high pressure manometer

 Pressure switches

 High pressure lines 316 L

 Low pressure line Stainless Steel

 Automation panel

 1000 PSI (70 bar) resistant FRP membrane sheath

 316 L high pressure pump + Stainless Steel Dampeners

 Feed Water pump

 Stainless Steel Housing Sedimen Filter

Design Criterias :

 TDS < 35000 ppm

 18 C nominal operating temperature

 Min. 3 bar entrance pressure need

 Max. 67 bar operating pressure

 Flux 16 L/m2/h

 SDI < 3

 Iron < 0,01 mg/lt

 Manganese/Aluminum < 0,025 mg/lt

 Barium, Strontium very less

 Boron: none

 Silica < 20 ppm

 Free Chloride, oxidant material : none

 Hydrocarbons, oil and grease : none

 Hydrogen Sulfide : none

 BOI, KOI : none

 Bacteriological contamination : none

Advantages :

 Easy to operate without any need for full time operator

 Low business cost

 Automatic rinse and start

 LCD screen

 All automatic alarms

 Stainless steel 316 high pressure pump

 Systems status indicators on the automation panel

 Optional Frequency Electrical 50 / 60 Hz

Optional Features

 Acid dosage Unit

 PH ORP Control Unit

 Antischalant dosage unit

3

(4)

WATTECH

Technical Features And Price FWM.W40 :

* Reciprocating type high pressure pump is used.