GENERATION OF DARK PULSES IN A BISMUTH TELLURITE BASED MODE-LOCKED ERBIUM-DOPED FIBER LASER
Teks penuh
Dokumen terkait
THULIUM-DOPED FIBER AS GAIN MEDIUM AND SATURABLE ABSORBER FOR PULSED FIBER LASERS.. Muhammad Taufiq
This project will focus primarily on the simulation of the wideband optical amplifier using high concentration Erbium Doped Fibre in single pass configuration.. The
Since the performance of the amplifier is influenced by the parameter of Optical Signal-to-Noise Ratio (OSNR), Bit Error Rate (BER), and Noise Figure (NF), the problem encounter
Pada jurnal ini diteliti kinerja single Ring Resonator dua kopler yang diintegrasikan dengan Erbium Doped Fiber (EDF) terutama dalam konfigurasi Drop Port
Dengan melihat karakteristik dari kaca yang dihasilkan ini, maka kaca TBZP yang dihasilkan dalam penelitian ini dapat dija- dikan sebagai bahan untuk membuat fiber optik yang
After the laser cutting, three characteristics are observed, such as the re-solidified zone, HAZ and the glassy layer in the cut surface of cement-based materials.. The glassy layer is
The main analytical and numerical models we have used for the study of fiber optic amplifiers are [17-19]: the transport equations model for the analytical and numerical modeling of the
Noise Suppression of Hybrid Silicon Mode-Locked Ring Laser Using Intracavity Reflectors Mohammad Shekarpour, Mohammad Hasan Yavari Faculty of Engineering, Shahed University, Tehran,
