The Degree of Jawaharlal Nehru Technological University Hyderabad will be awarded to candidates who are admitted to the program and who fulfill all the requirements for the award of the Degree. Degree, the candidate must meet all the academic requirements of the courses, according to the structure of the course. Only after receiving the approval from the Academic Committee of the Department, the student can start the work of the Project.
For the purpose of approval by the PRC, the candidate must submit the draft copy of the thesis to the Vice-Chancellor through the Head of Department and make an oral presentation before the PRC. If the examiner's report is again unfavorable, the thesis is rejected. The head of department must coordinate and ensure the implementation of the Viva-Voce exam.
In case the Viva-Voce report is unsatisfactory, the candidate will undergo the Viva-Voce examination again only after three months. If he fails to obtain a satisfactory report in the second Viva-Voce examination, he will not be eligible for the award of the degree. Once a student has met the prescribed requirements for completing the program and is eligible for the award of the M.
Has copied in the examination hall from any paper, book, programmable calculators, PDAs or any other material relevant to the subject of the examination (theory or practical) in which the candidate is appearing. Exclusion from the examination hall and cancellation of participation in this subject only for all registered candidates. Exclusion from the exam hall and cancellation occurs in this subject and all other subjects that the candidate has already taken, including practical exams and project work, and may not appear in the remaining exams of the subjects of this semester/.
The candidate's hall ticket must be canceled and sent to the university. The academic rules regarding loss of seat apply to the candidate's continuation of the training. Removal from the examination hall and cancellation of performance in that subject and all other subjects for which the candidate has already appeared including practical examinations and project work and will not be allowed for the remaining examinations of the subjects of that semester/year.
In case of students of the college, they will be removed from the examination halls and their performance in that subject and all other subjects for which the candidate(s) has already appeared will be suspended and they will not be allowed to appear for the remaining examinations of the courses of that semester/year. Removal from the examination hall and cancellation of appearance in that subject and all other subjects for which the candidate has already appeared including practical examinations and project work and will not be allowed for the remaining examinations of the subjects of that semester/year. Expulsion of students of the colleges from the examination hall and cancellation of the performance in that subject and all other subjects for which the candidate has already appeared including practical examinations and project work and will not be admitted to the remaining examinations of the subjects of that semester/year .
Cancellation of performance in that subject and all other subjects in which the candidate has appeared including practical examinations and project work of that semester/annual examination.
Any two of the following
Two-dimensional FEM: Different types of elements for plane stress and plane strain analysis - displacement models - generalized coordinates - shape functions - convergent and compatibility requirements - geometric invariance - natural coordinate system - area and volume coordinates - generation of element stiffness and nodal load matrices. Introduction to Finite Element Method by Tirupathi Chandra Patila and Belugunudu Prentice Hall of India Pvt Ltd - 2007. Conventional Retaining Wall: Types of Retaining Walls, Stability (Sliding, Tilting, Load Capacity and General) of Gravity and Cantilever Walls, Proportion of Retaining Walls Walls, Filling Material and drainage.
Reinforced cuts and soil nailing: lateral earth pressure in reinforced cuts, design of various components, stability of reinforced cuts, base heaving and stability, yielding and settlement of the soil around the excavation, diaphragm walls – mud support; Soil nailing. Principles of Highway Engineering & Traffic Analysis, New York: FL Mannering & WP Kilareski, John Wiley & Sons publications. Introduction to photogrammetry: principle and types of aerial photographs, stereoscopy, map versus mosaic, ground control, parallax measurements for height, determinations.
Design of shear walls: Classification according to behavior, loads in shear walls, design of rectangular and flanged shear walls, derivation of the formula for the resisting moment of rectangular shear walls - coupled shear walls. Consideration of Ductility in Seismic Design of AB Buildings: Introduction – Effect of Ductility – Ductility Requirements – Assessment of Ductility – Factors Affecting Ductility – Consideration of Ductile Details as per IS 13920 Seismic Design of Structures – Pankaj Agarwal and Manish Shrikhande, Prentice Hall of India Pvt.
Repair of Structure – Common Types of Repair – Repair in Concrete Structures – Repair in Underwater Structures – Guniting – Shot Create – Support. Concrete Bridges: Introduction-Types of bridges-Economic span length-Types of loading-Dead load-live load-Impact effect-Centrifugal force-wind loads-Lateral forces-Longitudinal forces-Seismic loads-Discussion of IRC loads-Frictional resistance of expansion bearings-Secondary stresses-Temperature -effect- Erecting forces and effects-Width of road and footpath-General design requirements. Prestressed Concrete Bridges: Basic Principles-General Design Requirements-Mild Steel Reinforcement in Prestressed Concrete Member-Concrete Cover and Spacing of Prestressing Steel-Slender Beams-Composite Section-Bracing-Design of Bracing Composite Section-Unsupported Composite Section-Two -Stage Prestressing-Shrinkage-General Design Requirements for Road Bridges – design of beams and expansion joints.
Investment Valuation: Tools and Techniques for Determining the Value of Any Asset : University Edition, John Wiley and Sons, Inc.
Financial and Cost Concepts for Construction , John Wiley & Sons
Investment Valuation: Tools and Techniques for Determining Asset Value: University Edition, John Wiley and Sons, Inc. University Edition, John Wiley and Sons, Inc. Modern Construction Management, 5th Edition. Engineering Economics, Prentice Hall Halpin, D. JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD M. BASIS OF STRUCTURAL ENGINEERING CHOICE III & IV. Basic design concepts: Introduction, work stress method and limit state method, Code recommendations for limit state design.
Limit state of serviceability: Deflections – Limit values – Short-term and long-term deflections – Effective and cracked moment of inertia – Effect of compressive reinforcement on deflections. JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD M. EARTH ENGINEERING ELECTIVE III & IV UNIT -I. Introduction to the modification of engineered soils: Needs and objectives, Identification of soil types, In situ and laboratory tests for the characterization of problem soils; Mechanical, hydraulic, physico-chemical, electrical, thermal methods and their applications. Hydraulic modification - objectives and techniques, traditional dewatering methods and their selection, dewatering system design, electroosmosis, electrokinetic dewatering.
Physical and chemical modification – Modification by admixtures, Fusion and shot technology, Deep modification with deep joints, crack and compression joints, reaction joints, Thermal modification, soil freezing. -soil reinforcement in place, ground anchors, stone bolts and soil nailing. 1990) – Engineering Principles of Ground Modifications, McGraw Hill Publications. Organizational Development Strategy for Construction Organizations Strategy Planning, Formulation and Implementation, Organizational Structures for Construction Firms and Projects, Project Management Maturity Integrating Project Management into Other Management Systems in Project-Based Organizations, Organizational Culture in construction organizations.
Dynamics of behavior in construction organizations, development of leadership skills, motivating the construction team, joint project management, recruitment and training of construction managers. Naoum, Shamil (2001): Managing People and Organizations in Construction, 1st Edition, London: Thomas Telford. 2006): The New Age of Management, International Edition, Thomson Publisher.
