Curriculum Vitae
Field of Specialization
Sustainable Manufacturing Technology-Modulation Assisted Machining, Surface Engineering, Fabrication and Thermal Analysis of Composite Materials
Short Project Descriptions
Modulation assisted drilling (MAD) of a Ni-based superalloy; Inconel 718 has been reported in the current study. During MAD, a controlled low-frequency vibration and high amplitude was superimposed in the feed direction, and its effect on tool flank wear, thrust force and surface roughness was investigated. For comparison, conventional machining was also done under similar machining parameters. A Tribo-MAM tool holder (Patented tool-M4 Sciences) was retrofitted on a computer controlled lathe for providing the vibration frequency to the drill bit. The maximum flank wear was measured with a tool maker’s microscope. The used carbide drills were inspected under the scanning electron microscope (SEM) to establish the probable wear mechanism. The results of the study showed that the tool flank wear (VBmax) got reduced significantly during MAD in comparison with that during the conventional drilling (CD).
Academic Record
Degree Institution University Percentage/
CGPA
Year Ph.D. Indian Institute of
Technology Ropar, Punjab, India.
Indian Institute of Technology Ropar,
Punjab, India.
7.54 Pursuing M.Tech
(Thermal Engineering)
Beant College of Engineering and Technology. Gurdaspur,
Punjab, India.
Punjab Technical University Jalandhar,
Punjab India.
73.81% 2015
B. Tech (Mechanical Engineering)
SSSETC,Gurdaspur, Punjab, India.
Punjab Technical University Jalandhar,
Punjab India
77.38 % 2013
12th
Tagore Memorial Sen. Sec School, Gurdaspur, Punjab
India.
PSEB, Mohali 63.11% 2009
Matriculation
Tagore Memorial Sen. Sec School, Gurdaspur, Punjab
India.
PSEB, Mohali 64.23% 2007 MALKEET SINGH
Research Scholar (Ph.D.)
Department of Mechanical Engineering, Indian Institute of Technology Ropar
Nangal Road, Rupnagar, Punjab, INDIA 140001 Email: [email protected]
[email protected] Contact number: +91-8968928466 Date of Birth & Sex: 20.02.1991, Male Marital Status: Unmarried
M.Tech Thesis Title: INVESTIGATION OF THERMAL CONDUCTIVITY OF BIMODAL- PARTICULATE REINFORCED ALUMINUM COMPOSITES
Teaching and Research Experience
Details of Trainings/Experiences
Name of Industry/organization Project Undertaken Tenure
Maruti Suzuki India Limited Gurgaon-122015 (Haryana)
India.
MOST Productivity,
Variation in Alternator Belt Tension, PFMEA, VAVE and Time Study.
6 Months Northern Railway Mechanical
Workshop, Amritsar (Punjab) India.
DC Generator 45 Days
Details of Fellowships/Scholarships:
Name of Fellowship/Scholarship Awarded Year (from-to) Amount of Scholarship Aeronautic Research & Development
Board
16.09.2016 – Till date 25000/- PM + HRA Teaching
Assistantship
MHRD, TEQIP-II, M.
Tech, BCET Gurdaspur.
13.08.2013 - 30.06.2015 8000/- PM
Subjects Taught
Engineering Drawing
Manufacturing practices Rewards/Prizes
Bagged Silver Medal in "BETiC Medical Innovation Challenge "during 7th Inter IIT Tech Meet (2018) held at IIT Bombay
Project selected in “Initiative for Research & Innovation in Science"
(IRIS) National Science Fair (2018) held on 2
nd-4
thDecember, (2018) in New Delhi., Project titled- “Re-inventing portable shelters by studying various properties of a new and denser physical FORM of Polystyrene (PS) obtained
Institution Year (from-to) Designation Guru Nanak Dev University
Regional Campus Gurdaspur, (Punjab) India.
04.08.2015 – 29.04.2016 Assistant Professor Indian Institute of Technology
Ropar (Punjab) India.
16.09.2016 – 05.08.2017 Junior Research Fellow
from its polymer waste by a chemically activated physical process of dissolution”
Environmental Management, Project ID: EM-584.
3
rdprize in Intellectual Property Rights (IPRs) Competition Award (2018) held on 24. January.2018 at IIT Ropar, (Punjab) India
First position in M. Tech from Beant College of Engineering and Technology Gurdaspur, (Punjab) India
Research Publications
International Refereed Journals
1. Singh, H., Sodhi, G., Singh, M., Chelliah, N., Singh, H., (2018) “Study: Wear and Superhydrophobic behaviour of PTFE-Ceria Composite”, Surface Engineering, DOI:
10.1080/02670844.2018.1499176
2. Sidhu, S.S., Singh M., Bains, P., (2016) “On The Thermal Conductivity of Bi-Modal Sic/A356 Composites Fabricated Via Powder Metallurgy Route”, Particulate Science and Technology., DOI: 10. 1080/02726351-2016-1248260.
National, International Conferences
1 Singh, M., Dhiman,S., Singh,H., Berndt,C., (2019) “Investigation of Drilled hole Quality for Modulation-Assisted Drilling: A comparative study”, selected at International Conference on Material, Manufacturing and Decision Making., February 22-23, 2019 held at BCET, Gurdaspur
2 Singh, M., Singh, H., (2017) “Modulation Assisted Drilling of Inconel-718 Ni-Based Superalloy,” delivered at International Conference on Nanotechnology: Ideas, Innovations & Initiatives ICN:3I-2017., December 6 - 8, 2017 held at IIT Roorkee, India.
3 Singh, M., Sidhu, S.S., Bains, P., (2016) “Analysis of Coefficient of Thermal Expansion of Al/Sicp Bimodal Composites Fabricated via Powder Metallurgy”, Proc. IVth International Conference on Production and Industrial Engineering, CPIE-2016., December 19-21, held at NIT Jalandhar.
4 Singh, M., Sidhu, S.S., Saini, B.B., (2015) “Review of Thermal Conductivity and Coefficient of Thermal Expansion of Metal Matrix Composites” proc. 17th ISME Conference Advances in Mechanical Engineering, organized by Dept. of Mechanical Engineering, Indian Institute of Technology Delhi 3rd – 4th October 2015, ISME-M-105.
5 Singh, M., Saini, B.B., Sidhu, S.S., (2015) “Review of Thermal Conductivity of Metal Matrix Composites” Proc.2nd National Conference on Recent Trends in Mechanical Engineering (RTME 2015), organized by Dept. of Mechanical Engineering, BCET Gurdaspur during 20-21 March, 2015, paper id 10293.
Details of Courses/Presentation/Seminars:
Sr.No Name of Course/Seminar/Presentation Contribution Tenure
(i) TEQIP Short Term Course on “Advances in Mechanical Engineering” held from 23-06-2014 to 27-06-2014 at BCET Gurdaspur.
Participant And In-charge of Decoration Committee
One Week (TEQIP)
(ii) TEQIP 1st National Conference on “Recent Trends in Mechanical Engineering (RTME 2014)” held from 21-
Organizer 2 Days
02-2014 to 22-02-2014 at BCET Gurdaspur. (TEQIP)
(iii) TEQIP 2nd National Conference on “Recent Trends in Mechanical Engineering (RTME 2015)” held during 20- 21 March, 2015 at BCET Gurdaspur.
Co-
coordinator and
Participant
2 days (TEQIP)
(iv) B.Tech (Mechanical) Seminar on “Global Warming” at SSSETC Gurdaspur.
Talk _ _ _ _
(v) M.Tech (Thermal) Seminar on “Renewable Energy System” at BCET Gurdaspur.
Talk _ _ _ _
Declaration
I hereby declare that the above written particulars are true to the best of my knowledge and belief. I assure to work sincerely and prepared to do hard work duly abiding to organization.
Yours sincerely
Malkeet Singh
