Course Outcomes: At the end of the course, the student will be able to: Apply the finite element method to solve problems in solid mechanics, fluid mechanics and heat transfer. Steady State Heat Transfer Analysis: One-dimensional analysis of plate, fin and two-dimensional analysis of thin plate.
Mechanical Systems: Fuel cells- principle, thermodynamic aspects, selection of fuels &
Bio-Mass: Principles of bio-conversion, anaerobic/aerobic digestion, types of bio-gas solvents, gas yield, bio-gas combustion characteristics, cooking utilization, bio-fuels, I.C. Fault diagnosis, Interpretation of vibration measurements for common machine faults, unbalance, distortion, mechanical looseness, bearing and gear faults, faults in induction motors, resonances, some case studies, static and dynamic balancing, international standards for monitoring of the state of vibration.
TECH. AERONAUTICAL ENGINEERING INTRODUCTION TO SPACE TECHNOLOGY
L T P C Course code: CE511OE 3 0 0 3 Course code: CE511OE 3 0 0 3 Course objectives: The subject provides different disasters, tools and methods for disaster management. Organizational Structure for Disaster Management in India - Preparation of State and District Disaster Management Plans.
TECH. AUTOMOBILE ENGINEERING DATA STRUCTURES
Fundamentals of Data Structures in C, 2nd Edition, E.Horowitz, S.Sahni, and Susan Anderson-Freed, Universities Press. Data Structures and Algorithms Made Simple in JAVA, 2nd Edition by Narsimha Karumanchi and Career Monk Publications.
TECH. AUTOMOBILE ENGINEERING ARTIFICIAL NEURAL NETWORKS
TECH. AUTOMOBILE ENGINEERING INTRODUCTION TO MECHATRONICS
Programmable Motion Controllers: Introduction - System Transfer Function - Laplace Transform and its Application in Differential Equation Analysis of a Control System - Feedback Devices: Position, Velocity Sensors - Optical Incremental Encoders - Proximity Sensors: Inductive, Capacitive, Infrared - Continuous and Discrete Processes - Control System Performance and tuning - Digital controllers - P , PI , PID control - Control modes - Position , Speed and Torque - Speed profiles - Trapezoidal - S.
TECH. AUTOMOBILE ENGINEERING MICROPROCESSORS AND MICROCONTROLLERS
Advanced ARM Processors: Introduction to CORTEX Processor and its Architecture, OMAP Processor and its Architecture.
TECH. BIOMEDICAL ENGINEERING RELIABILITY ENGINEERING
Series systems, Parallel systems – Partially redundant systems - determination of reliability measure - MTTF for series and parallel systems – Examples. Approximate evaluation of system reliability: Series systems – Parallel systems - Network reduction techniques - Cut-set approach - Common mode fault modeling and evaluation techniques - Examples.
TECH. BIOMEDICAL ENGINEERING MEDICAL ELECTRONICS
To expose the various remote sensing platforms and sensors and introduce the concepts of GIS, GPS and GNSS. Satellite Image - Characteristics and Formats, Image Histogram, Introduction to Image Rectification, Image Enhancement, Land Use and Land Cover Classification System, Unsupervised and Supervised Classification, Applications of Remote Sensing.
TECH CIVIL ENGINEERING
The Environmental Protection Act, the Water Act, the Air Act (Pollution Prevention and Control Act), Motor Act, Wildlife Act.
TECH. CIVIL ENGINEERING
Course Outcome: It enables students to learn the basics of entrepreneurship and entrepreneurial development, which will help them provide a vision for their own start-up. Strategic Growth in Entrepreneurship, The Valuation Challenge in Entrepreneurship, The Latest Crop of New Ventures, Technology, Business Incubation, India Way - Entrepreneurship; Women Entrepreneurs - Strategies to Develop Women Entrepreneurs, Institutions that Support Women Entrepreneurship in India.
TECH. CIVIL AND ENVIRONMENTAL ENGINEERING DISASTER MANAGEMENT
National Disaster Management Plan, Ministry of Home Affairs, Government of India (http://www.ndma.gov.in/images/policyplan/dmplan/draftndmp.pdf).
TECH. CIVIL AND ENVIRONMENTAL ENGINEERING ENVIRONMENTAL IMPACT ASSESSMENT
TECH. CIVIL AND ENVIRONMENTAL ENGINEERING INTELLECTUAL PROPERTY RIGHTS
Introduction to Database Design: Database Design and ER Diagrams, Entities, Attributes and Entity Sets, Relationships and Relationship Sets, Additional Features of the ER Model, Conceptual Design with the ER Model, Conceptual Design for Enterprise gave me. Java Collection Framework – Introduction to Java Collections, Working Overview of Java Collection Framework, Generics, Commonly Used Collection Classes – Array List, Vector, Hash Table, Stack, Enumeration, Iterator, String Tokenizer, Random, Scanner, calendar and Properties.
UNIT IV
TECH COMPUTER SCIENCE AND ENGINEERING/TECH INFORMATION TECHNOLOGY
WORKING WITH FUNCTIONS: Variable function, String function, Math function, Date function, Array function and File function. WORKING WITH DATABASE: Creating a table, manipulating the table, editing the database, inserting a record, deleting a record, editing data.
TECH. ELECTRONICS AND COMMUNICATION ENGINEERING / TECH ELECTRONICS AND TELEMATICS ENGINEERING
ELECTRONICS AND COMMUNICATION ENGINEERING / B.TECH ELECTRONICS AND TELEMATICS ENGINEERING / B.TECH ELECTRONICS AND TELEMATICS ENGINEERING Principles of COMPUTER COMMUNICATIONS AND NETWORKS. Overview of Computer Communications and Networking: Introduction to Computer Communications and Networking, Introduction to Computer Networks, Types of Computer Networks, Network Addressing, Routing, Reliability, Interoperability and Security, Network Standards, Telephone System and Data Communications.
TECH. ELECTRONICS AND COMPUTER ENGINEERING SCRIPTING LANGUAGES
Tcl Fundamentals, String and Pattern Matching, Tcl Data Structures, Control Flow Commands, Procedures and Scope, Evel, Working with Unix, Reflection and Debugging, Script Libraries, Tk Fundamentals, Tk byexamples, The Pack Geometry Manager, Binding Commands to X Events, Buttons and Menus, Simple Tk Widgets, Input and Dropdown Widgets Focus, Grabs and Dialogs. Introduction to Python, using the Python interpreter, more Control Flow tools, data structures, modules, input and output, errors and exceptions, classes, quick tour of the standard library.
TECH. ELECTRONICS AND COMPUTER ENGINEERING SOFT COMPUTING TECHNIQUES
Basic concepts of Genetic Algorithms (GA), biological background, creation of offspring, working principle, coding, fitness function, reproduction, inheritance operators, crossover, inversion and deletion, mutation operator, bitwise operators used in GA, generation cycle, Convergence of Genetic Algorithm. Types of Hybrid Systems, Neural Networks, Fuzzy Logic and Genetic Algorithms Hybrid Genetic Algorithm Based BPN: GA Based Weight Determination, Fuzzy Back Propagation Dept.
TECH. ELECTRONICS AND COMPUTER ENGINEERING DATA ANALYTICS
Frequent itemsets and clustering: Mining of frequent itemsets – Market-based modeling – Apriori algorithm – Dealing with large data sets in main memory – Limited pass algorithm – Counting frequent itemsets in a stream – Clustering techniques – Hierarchical – K-means – Clustering of high-dimensional data – CLIQUE and ProCLUS – Frequent pattern-based clustering methods – Clustering in non-euclidean space – Clustering for flows and parallelism.
TECH ELECTRICAL AND ELECTRONICS ENGINEERING NON-CONVENTIONAL POWER GENERATION
Geothermal energy - sources - Hydrothermal convective sources - Geopressure sources - Petrothermal systems (HDR) - Magma sources - Prime Movers. OTEC systems - Principle of operation - Open and closed cycles, energy from tides - Principle of tidal energy - Components of tidal energy plants - Methods of operation - Estimation of energy in single and double basin systems - Energy and power from waves - Devices for the conversion of wave energy - Fuel cells - Design and working principle - Types of fuel cells - Advantages and disadvantages - Types of electrodes - Applications - Basics of batteries - Construction details of lead-acid batteries - Ni-Cd batteries.
TECH ELECTRICAL AND ELECTRONICS ENGINEERING ELECTRICAL ENGINEERING MATERIALS
TECH. ELECTRICAL AND ELECTRONICS ENGINEERING NANOTECHNOLOGY
Applications of nanomaterials: nanoelectronics, micro- and nanoelectromechanical systems (MEMS/NEMS), nanosensors, nanocatalysts, food and agricultural industry, cosmetics and consumer goods, structure and engineering, automotive industry, water purification and the environment, nano-medical applications, textiles, paints, energy, defense and space applications, concerns and challenges of nanotechnology.
TECH ELECTRICAL AND ELECTRONICS ENGINEERING DESIGN ESTIMATION AND COSTING OF ELECTRICAL SYSTEMS
Code of Practice for Electrical Wiring Installations, (System Voltage Not Exceeding 650 Volts), Indian Standards Institution, IS: 732-1983. Code of Practice for Electrical Wiring, Installations (System Voltage Not Exceeding 650 Volts), Indian Standards Institution, IS: 2274-1963.
TECH ELECTRICAL AND ELECTRONICS ENGINEERING ENERGY STORAGE SYSTEMS
Jim Eyer, Garth Corey”, Energy Storage for the Electric Grid: A Guide to Assessing Benefits and Market Potential, Report, Sandia National Laboratories, February 2010.
TECH ELECTRICAL AND ELECTRONICS ENGINEERING INTRODUCTION TO MECHATRONICS
Electromechanical drives: Relays and solenoids - Stepper motors - DC brush motors - DC brushless motors - DC servo motors - 4-quadrant servo drives, PWMs - Pulse width modulation - Variable frequency drives, vector drives - Drive system load calculation. Programmable Logic Controllers: Basic Structure - Programming: Ladder Diagram -Timers, Internal Relays and Counters - Shift Registers - Master and Jump Controls - Data Handling - Analog Input/Output - PLC Selection - Application.
TECH ELECTRICAL AND ELECTRONICS ENGINEERING ENTREPRENEUR RESOURCE PLANNING
ERP in Action and Business Modules: Operations and Maintenance - Performance - Maximizing the ERP System - Business Modules - Finance - Production - Human Resources - Plant Maintenance - Materials Management - Quality Management - Marketing - Sales, Distribution and Services. Enterprise Application Integration - ERP and e-Business - ERP II - Total Quality Management - Future Directions - Trends in ERP.
TECH ELECTRICAL AND ELECTRONICS ENGINEERING MANAGEMENT INFORMATION SYSTEM (MIS)
Modules: Finance, Accounting Systems, Manufacturing and Production Systems, Sales and Distribution Systems, Human Resource Systems, Plant Maintenance System, Materials Management System, Quality Management System, ERP System Options and Selection, ERP Proposal Evaluation.
TECH ELECTRICAL AND ELECTRONICS ENGINEERING ORGANIZATIONAL BEHAVIOUR
Teams – Nature of groups – dynamics of informal groups – dysfunctions of groups and teams – teams in the modern workplace. Leading high performance: task design and goal setting for high performance - Quality of work life - Sociotechnical design and high performance work practices - Behavioral performance management: reinforcement and punishment as learning principles - Process of behavior change - Leadership theories - Styles, activities and skills of great leaders.
TECH. ELECTRONICS AND INSTRUMENTATION ENGINEERING ELECTRONIC MEASUREMENTS AND INSTRUMENTATION
Oscilloscopes: CRT, Block Diagram of CRO, Time Base Circuits, Lissajous Figure, CRO Probes, High Frequency CRO Considerations, Delay Lines, Applications: Time Measurement, Period and Frequency Specifications. Measurement of physical parameters: Flow measurement, displacement meters, liquid level measurement, moisture and humidity measurement, velocity, force, pressure - High pressure, vacuum level, temperature - measurements, data collection systems.
TECH. ELECTRONICS AND INSTRUMENTATION ENGINEERING INDUSTRIAL ELECTRONICS
TECH. ELECTRONICS AND INSTRUMENTATION ENGINEERING SENSORS AND TRANSDUCERS
TECH. ELECTRONICS AND INSTRUMENTATION ENGINEERING PC BASED INSTRUMENTATION
TECH. MECHANICAL ENGINEERING OPTIMIZATION TECHNIQUES
Nonlinear Constrained Programming: Characteristics of a Constrained Problem - Classification - Basic Approach of Penalty Function Method - Basic Approach of Penalty Function Method - Basic Approaches of Inner and Outer Penalty Function Methods - Introduction to Convex Programming Problem . Dynamic programming: Dynamic programming multistage decision processes – types – concept of suboptimization and optimality principle – computational procedure in dynamic programming – examples illustrating computational method of solution – examples illustrating tabular method of solution.
TECH. MECHANICAL ENGINEERING COMPUTER GRAPHICS
Computer Graphics Edition Second”, Zhigand xiang, Roy Plastock, Schaum’s outlines, Tata Mc Graw hill edition. Computer Graphics Principles & Practice”, botimi i dytë në C, Foley, Van Dam, Feiner and Hughes, Pearson Education.
TECH. MECHANICAL ENGINEERING INTRODUCTION TO MECHATRONICS
TECH. MECHANICAL ENGINEERING
Couplings, clutches and brakes: construction and applications of couplings (box; flange; . pin type flexible; universal and Oldham), clutches (disc and centrifugal), and brakes (block; shoe; belt and disc). Engineering Materials: Types and applications of ferrous and non-ferrous metals, wood, abrasives, silica, ceramics, glass, graphite, diamond, plastic and polymer.
TECH. MECHANICAL ENGINEERING WORLD CLASS MANUFACTURING
The Future WCM: Manufacturing Strategie: Futiele Search for an Elusive Link, Manufacturing Strategic Intent Classification, Translating Intent into Action.
TECH. MECHANICAL ENGINEERING FUNDAMENTALS OF ROBOTICS
Trajectory planning: Common space scheme- Cubic polynomial fit-Obstacles Avoidance in operation space-cubic polynomial fit with via point, bleeding scheme.
TECH. MECHANICAL ENGINEERING FABRICATION PROCESSES
Forging Processes: Forging operations and principles – Tools – Forging methods – Smith forging, Spot hardening – Roll hardening – Forging hammers : Rolling forging – defects of forging – cold forging, oscillations, Forces in forging operations.
TECH. MECHANICAL ENGINEERING TOTAL QUALITY MANAGEMENT
Understand the laws of thermodynamics and apply them to different types of systems undergoing different processes. The goal is to provide students with an overview of the non-destructive testing methods of materials.
TECH. MECHANICAL ENGINEERING (MATERIAL SCIENCE AND NANOTECHNOLOGY)
- Ray Diffraction and Spectroscopic methods
To provide knowledge about top-down and bottom-up approaches for the synthesis of nanomaterials. Biological methods – use of bacteria, fungi, actinomycetes for nano-particle synthesis Nano-particle Dispersion of dissolved metal atom, Template-based synthesis of nanomaterials.
TECH. MECHANICAL ENGINEERING (MECHATRONICS) ANALOG AND DIGITAL IC APPLICATIONS
TECH. MECHANICAL ENGINEERING (MECHATRONICS) INTELLECTUAL PROPERTY RIGHTS
To understand the basic concepts like Abstract Data Types, Linear and Non-linear Data Structures. To understand the behavior of data structures such as stacks, rows, trees, hash tables, search trees, graphs and their representations.
