Course outcomes: At the end of the course the student will be able to Groundwater Occurrence, Groundwater Movement well construction etc. To understand Applications of GIS and Remote Sensing in Artificial Recharge of Groundwater along with Case Studies.
ROAD AGGREGATES
Course Outcomes: At the end of the course, the student will be able to assess the properties of highway materials on highway structures.
BITUMINOUS MATERIALS
TRAFFIC STUDIES
Introduction to earthquake resistant design: Seismic design requirements-regular and irregular configurations-basic assumptions-design earthquake loads-basic load combinations-allowable stresses-seismic methods of analysis-factors in seismic analysis-equivalent lateral force method. Introduction to Intellectual Property: Introduction, types of intellectual property, international organizations, agencies and treaties, meaning of intellectual property rights.
TECH. AUTOMOBILE ENGINEERING DATA STRUCTURES
Fundamentals of Data structures in C, 2nd Edition, E.Horowitz, S.Sahni and Susan Anderson-Freed, Universities Press. Data Structures and Algorithms Made Easy in JAVA, 2nd Edition, Narsimha Karumanchi and Career Monk Publications.
TECH. AUTOMOBILE ENGINEERING ARTIFICIAL NEURAL NETWORKS
Self-organizing maps (SOM): two basic feature mapping models, self-organizing map, SOM algorithm, feature map properties, computer simulations, learning vector quantization, adaptive pattern classification.
TECH. AUTOMOBILE ENGINEERING INTRODUCTION TO MECHATRONICS
Electromechanical drives: relays and solenoids - stepper motors - DC brush motors - DC brushless motors - DC servo motors - 4-quadrant servo drives, PWM - pulse width modulation - variable frequency drives, vector drives - drive system load calculation. Programmable Logic Controllers: Basic Structure - Programming: Ladder Diagram - Timers, Internal Relays and Counters - Shift Registers - Master and Skip Controllers - Data Handling - Analog Input/Output - PLC Selection - Application.
TECH. AUTOMOBILE ENGINEERING MICROPROCESSORS AND MICROCONTROLLERS
Advanced ARM Processors: Introduction to CORTEX processor and its architecture, OMAP processor and its architecture.
TECH. BIOMEDICAL ENGINEERING RELIABILITY ENGINEERING
Series systems, Parallel systems - Partially redundant systems - determination of reliability measure - MTTF for series and parallel systems - Examples. Approximate estimation of system reliability: Series systems - Parallel systems - Network reduction techniques - Cut set approach - Common mode failure modeling and evaluation techniques - Examples.
TECH. BIOMEDICAL ENGINEERING MEDICAL ELECTRONICS
To expose the various remote sensing platforms and sensors and introduce the concepts of GIS, GPS and GNSS. Satellite Image - Characteristics and Formats, Image Histogram, Introduction to Image Correction, Image Enhancement, Land Use and Land Cover Classification System, Unsupervised and Supervised Classification, Applications of Remote Sensing.
TECH CIVIL ENGINEERING
Environmental Protection Act, Water Act, Air Act (Pollution Prevention and Control Act), Motor Vehicle Act, Game Act.
TECH. CIVIL ENGINEERING
Course outcome: It enables students to learn the basics of entrepreneurship and entrepreneurial development, which will help them create a vision of their own start-up. Strategic Growth in Entrepreneurship, The Valuation Challenge in Entrepreneurship, The Final Harvest of New Ventures, Technology, Business Incubation, India way – Entrepreneurship; Women Entrepreneurs – Strategies for developing women entrepreneurs, institutions supporting women entrepreneurship in India.
TECH. CIVIL AND ENVIRONMENTAL ENGINEERING DISASTER MANAGEMENT
National Disaster Management Plan, Ministry of Home Affairs, Government of India (http://www.ndma.gov.in/images/policyplan/dmplan/draftndmp.pdf).
TECH. CIVIL AND ENVIRONMENTAL ENGINEERING ENVIRONMENTAL IMPACT ASSESSMENT
TECH. CIVIL AND ENVIRONMENTAL ENGINEERING INTELLECTUAL PROPERTY RIGHTS
Introduction to Database Design: Database Design and ER Diagrams, Entities, Attributes and Entity Sets, Relationships and Relationship Sets, Additional Features of the ER Model, Conceptual Design with the ER Model, Conceptual Design for Enterprise Gave me. Java Collection Framework – Introduction to Java Collections, Working Overview of Java Collection Framework, Generics, Commonly Used Collection Classes – Array List, Vector, Hash Table, Stack, Enumeration, Iterator, String Tokenizer, Random, Scanner, calendar and Properties.
UNIT IV
TECH COMPUTER SCIENCE AND ENGINEERING/TECH INFORMATION TECHNOLOGY
WORKING WITH FUNCTIONS: Variable function, String function, Math function, Date function, Array function and File function. WORKING WITH DATABASE: Create a table, manipulate the table, edit the database, insert a record, delete a record, edit data.
TECH. ELECTRONICS AND COMMUNICATION ENGINEERING / TECH ELECTRONICS AND TELEMATICS ENGINEERING
ELECTRONICS AND COMMUNICATION ENGINEERING / ELECTRONIC AND TELEMATICS ENGINEERING B.TECH / ELECTRONIC AND TELEMATICS ENGINEERING PRINCIPLES OF COMMUNICATION AND COMPUTER NETWORKS. Overview of computer communications and networking: Introduction to computer communications and networking, computer networking, types of computer networks, network addressing, routing, reliability, interoperability and security, network standards, telephone system and data communication.
TECH. ELECTRONICS AND COMPUTER ENGINEERING SCRIPTING LANGUAGES
Tcl Basics, String and Pattern Matching, Tcl Data Structures, Control Flow Commands, Procedures and Scope, Evel, Working with Unix, Reflection and Debugging, Script Libraries, Tk Basics, Tk by Examples, Geometry Manager package, X event binding commands, Buttons and menus, Simple Tk widgets, Input and list box widgets Focus, capture and dialogs. Introduction to Python, using the Python interpreter, More control flow tools, data structures, modules, input and output, errors and exceptions, classes, a brief tour of the standard library.
TECH. ELECTRONICS AND COMPUTER ENGINEERING SOFT COMPUTING TECHNIQUES
Basic concepts of genetic algorithms (GA), biological background, generation of offspring, working principle, coding, fitness function, reproduction, inheritance operators, crossover, inversion and deletion, mutation operator, bitwise operators used in GA, Generative Cycle, Genetic Algorithm Convergence. Types of Hybrid Systems, Neural Networks, Fuzzy Logic and Hybrid Genetic Algorithms, BPN Based Genetic Algorithm: GA Based Weight Determination, Department of Fuzzy Back Propagation.
TECH. ELECTRONICS AND COMPUTER ENGINEERING DATA ANALYTICS
Frequent Itemsets and Clustering: Mining Frequent Itemsets – Market-Based Modeling – Apriori Algorithm – Handling Large Datasets in Main Memory – Limited Pass Algorithm – Counting Frequent Itemsets in a Stream – Clustering Techniques – Hierarchical – K-means – Clustering of High Dimensional Data – CLICK and ProCLUS – Regular pattern based clustering methods – Clustering in non-euclidean space – Clustering for streams and Parallelism.
TECH ELECTRICAL AND ELECTRONICS ENGINEERING NON-CONVENTIONAL POWER GENERATION
Dry Processes - Biogas Production - Aerobic and Anaerobic Digestion - Factors Affecting Biogas Production - Classification of Biogas Plants - Different Indian Digesters - Digester Design Considerations - Gasification Process - Gasification Apparatus - Applications. Geothermal Energy - Sources - Hydrothermal Convective - Geopressure Resources - Petrothermal Systems (HDR) - Magma Resources-Prime Movers.
TECH ELECTRICAL AND ELECTRONICS ENGINEERING ELECTRICAL ENGINEERING MATERIALS
TECH. ELECTRICAL AND ELECTRONICS ENGINEERING NANOTECHNOLOGY
Applications of nanomaterials: Nano-electronics, micro- and nano-electromechanical systems (MEMS/NEMS), nanosensors, nanocatalysts, food and agricultural industries, cosmetic and consumer goods, structure and engineering, automotive industry and environment, water treatment - applications medical, Textiles, Paints, Energy, Defense and Space Applications, Nanotechnology concerns and challenges.
TECH ELECTRICAL AND ELECTRONICS ENGINEERING DESIGN ESTIMATION AND COSTING OF ELECTRICAL SYSTEMS
Code of Practice for Electrical Wiring Installations, (System Voltage Not Exceeding 650 Volts), Indian Standards Institution, IS: 732-1983. Code of Practice for Electrical Wiring, Installations (System Voltage Not Exceeding 650 Volts), Indian Standards Institution, IS: 2274-1963.
TECH ELECTRICAL AND ELECTRONICS ENGINEERING ENERGY STORAGE SYSTEMS
Jim Eyer, Garth Corey”, Energy Storage for the Electric Grid: Benefits and Market Potential Assessment Guide, Report, Sandia National Laboratories, February 2010.
TECH ELECTRICAL AND ELECTRONICS ENGINEERING INTRODUCTION TO MECHATRONICS
Programmable Motion Controllers: Introduction - System Transfer Function - Laplace Transform and its Application in Differential Equation Analysis of a Control System - Feedback Devices: Position, Velocity Sensors - Optical Incremental Encoders - Proximity Sensors: Inductive, Capacitive, Infrared - Continuous and Discrete Processes - Control System Performance and tuning - Digital controllers - P , PI , PID control - Control modes - Position , Speed and Torque - Speed profiles - Trapezoidal - S.
TECH ELECTRICAL AND ELECTRONICS ENGINEERING ENTREPRENEUR RESOURCE PLANNING
ERP In Action & Business Modules: Operation and Maintenance – Performance – Maximizing the ERP system – Business Modules – Finance – Manufacturing – Human Resources – Plant Maintenance – Materials Management – Quality Management – Marketing – Sales, Distribution and Service. Business Application Integration – ERP and E-Business – ERP II – Total Quality Management – Future Directions – Trends in ERP.
TECH ELECTRICAL AND ELECTRONICS ENGINEERING MANAGEMENT INFORMATION SYSTEM (MIS)
Management systems, Reasons for the growth of ERP, Business modeling, Integrated data model, Foundations of IS in business, Obstacles to the use of IT, ERP market - ERP modules: Finance, Accounting systems, Production and production systems, Sales and distribution systems, , Human resource systems , plant maintenance system, material management system, quality management system, ERP system options and selection, ERP proposal evaluation.
TECH ELECTRICAL AND ELECTRONICS ENGINEERING ORGANIZATIONAL BEHAVIOUR
Teams – Nature of groups – dynamics of informal groups – dysfunctions of groups and teams – teams in the modern workplace. High Performance Manager: Job design and goal setting for high performance - Quality of work life - Socio-technical design and high performance work practices - Behavioral performance management: reinforcement and punishment as learning principles - Behavior modification process - Leadership theories - Styles, activities and skills of great leaders.
TECH. ELECTRONICS AND INSTRUMENTATION ENGINEERING ELECTRONIC MEASUREMENTS AND INSTRUMENTATION
Oscilloscopes: CRT, block diagram of CRO, time base circuit, Lissajous figures, CRO probes, high frequency CRO considerations, delay lines, applications: measurement of time, period and frequency specifications. Measurement of physical parameters: flow measurement, displacement gauges, liquid level measurement, humidity and moisture measurement, speed, force, pressure – high pressure, vacuum level, temperature measurements, data acquisition systems.
TECH. ELECTRONICS AND INSTRUMENTATION ENGINEERING INDUSTRIAL ELECTRONICS
TECH. ELECTRONICS AND INSTRUMENTATION ENGINEERING SENSORS AND TRANSDUCERS
Various Transducers: Piezoelectric Transducer - Hall Effect Transducer - Smart Sensors - Fiber Optic Sensors - Film Sensors - MEMS - Nano Sensors, Digital Transducers.
TECH. ELECTRONICS AND INSTRUMENTATION ENGINEERING PC BASED INSTRUMENTATION
TECH. MECHANICAL ENGINEERING OPTIMIZATION TECHNIQUES
Constrained Nonlinear Programming: Characteristics of a constrained problem - classification - Basic approach to penalty function method - Basic approach to penalty function method - Basic approaches to interior and exterior penalty function methods - Introduction to convex programming problem. Dynamic programming: Dynamic programming multi-step decision processes – types – concept of suboptimization and the principle of optimality – calculation procedure in dynamic programming – examples illustrating the calculus method of solution – examples illustrating the tabular method of solution.
TECH. MECHANICAL ENGINEERING COMPUTER GRAPHICS
Computer Graphics Second edition”, Zhigand xiang, Roy Plastock, Schaum's outlines, Tata Mc Graw hill edition. Computer Graphics Principles & practice”, anden udgave i C, Foley, Van Dam, Feiner og Hughes, Pearson Education.
TECH. MECHANICAL ENGINEERING INTRODUCTION TO MECHATRONICS
TECH. MECHANICAL ENGINEERING
Clutches, Couplings and Brakes: Construction and application of clutches (box; flange; . pin type flexible; Universal and Oldham), clutches (disc and centrifugal) and brakes (block; shoe; band and disc). Engineering materials: Types and uses of ferrous and non-ferrous metals, timber, abrasives, silica, ceramic, glass, graphite, diamond, plastic and polymer.
TECH. MECHANICAL ENGINEERING WORLD CLASS MANUFACTURING
The Future of WCM: Manufacturing Strategy: A Futile Search for the Elusive Link, Classification of Manufacturing Strategic Intentions, Converting Intentions into Actions.
TECH. MECHANICAL ENGINEERING FUNDAMENTALS OF ROBOTICS
Trajectory planning: Joint space scheme- Cubic polynomial fit- Obstacle avoidance in operation space-cubic polynomial fit with via point, bleed scheme.
TECH. MECHANICAL ENGINEERING FABRICATION PROCESSES
Forging Processes: Forging operations and principles – Tools – Forging methods – Smith forging, Spot hardening – Roll hardening – Forging hammers : Rolling forging – defects of forging – cold forging, oscillations, Forces in forging operations.
TECH. MECHANICAL ENGINEERING TOTAL QUALITY MANAGEMENT
Understand and apply the laws of thermodynamics to different types of systems undergoing different processes. The aim is to introduce the students to the overview of the non-destructive testing methods of materials.
TECH. MECHANICAL ENGINEERING (MATERIAL SCIENCE AND NANOTECHNOLOGY)
- Ray Diffraction and Spectroscopic methods
To provide knowledge on top-down and bottom-up approaches for the synthesis of nanomaterials. Biological methods – use of bacteria, fungi, actinomycetes for the synthesis of nanoparticles. nanoparticles Solvated metal atom dispersion, template-based synthesis of nanomaterials.
TECH. MECHANICAL ENGINEERING (MECHATRONICS) ANALOG AND DIGITAL IC APPLICATIONS
TECH. MECHANICAL ENGINEERING (MECHATRONICS) INTELLECTUAL PROPERTY RIGHTS
Understand basic concepts such as abstract data types, linear and non-linear data structures. Understand the behavior of data structures such as stacks, queues, trees, hash tables, search trees, graphs and their representations.
