• Tidak ada hasil yang ditemukan

The effect of sintering temperature to the properties of zinc oxide

N/A
N/A
Info
Unduh - Bebas
Protected

Academic year: 2024

Membagikan "The effect of sintering temperature to the properties of zinc oxide"

Copied!
1
0
0

Memuat.... (Lihat teks lengkap sekarang)

Unduh sekarang ( 1 Halaman )

Teks penuh

(1)

The effect of sintering temperature to the properties of zinc oxide

Abstract

In this paper, different sintering temperature used to study the influence of temperature on the structural and thermal properties of zinc oxide (ZnO). On this research, the sample was prepared by solid-state method for zinc oxide (ZnO) at different sintering temperature which was 700°C, 800°C and 900°C. It was observed that the density of bulk ZnO that sintering at 900°C had the higher value of density 5.03 g/cm3. The microhardness of the bulk ZnO had a higher measurement 397.3 Hv after sintered at 900°C. ZnO that sintering at 900°C had been observed that had thermal conductivity 1.1611W/cm-K in the sintering temperature range 700°C to 900°C.

Keywords

Density; Microhardness; Sintering temperature; Thermal conductivity; Zinc oxide

Referensi

Unduh sekarang ( PDF - 1 Halaman - 9.54 KB )

Dokumen terkait

JMMM Tailoring the structural and optical properties of zinc oxide with addition of bismuth oxide prepared by two step process

Tailoring the structural and optical properties of zinc oxide with addition of bismuth oxide prepared by two step process Saedah Munirah SANUSI1, Ruziana MOHAMED1,*, Nurin Jazlina

The Effect of Sintering Temperature on Hydrophobic Characteristic of Silica Manganese /Polystyrene (SiMn/PS)

Therefore, this research intends to decide the effect of variations in sintering temperature on the hydrophobic characteristic of SiMn/PS nanocomposite layers using a sintering

Influence of annealing temperature on the sensitivity of nickel oxide nanosheet films in humidity sensing applications

Influence of annealing temperature on the sensitivity of nickel oxide nanosheet films in humidity sensing applications ABSTRACT Nickel oxide NiO nanosheet films were successfully

Correlation between the calcination and sintering temperature on phase formation, microstructure and dielectric properties of SrTiO3 ceramics

Furthermore, obtained results show that the increase in the sintering temperature induces the increase in the grain size.However, study of the dielectric properties, show an interesting

Structural and optical properties of calcium-doped zinc oxide sputtered from nanopowder target materials

Abstract Calcium-doped zinc oxide ZnO:Ca thin films were deposited onto glass substrates by rf-magnetron sputtering at ambient temperature using nanocrystalline powder synthesized by

Effect of sintering time on the properties of LaYO3 doped with ZrO2 solid electrolyte

Effect of sintering time on the properties of LaYO3 doped with ZrO2 solid electrolyte Abstract LaYO3 doped-ZrO2ceramic with the composition La0.95Zr0.05YO3+δ was prepared via the

The effect of sintering duration on mechanical properties of Al/SiC composites

The effect of sintering duration on mechanical properties of Al/SiC composites Abstract Metal matrix composites MMCs have become attractive in a variety of applications due to its

The Mobility Enhancement of Indium Gallium Zinc Oxide Transistors via Low-temperature Crystallization using a Tantalum Catalytic Layer

www.nature.com/scientificreports The Mobility Enhancement of Indium Gallium Zinc Oxide Transistors via Low-temperature Crystallization using a Tantalum Catalytic Layer Yeonwoo