REFERENCES
[1] Neil H.E. Weste and David Harris (2005), CMOS VLSI Design. 3rd Edition, Pearson Education, Inc. USA.
[2] Hong Xiao (2001), Introduction to Semiconductor Manufacturing Technology. 1st Edition, Prentice-Hall, Inc. USA.
[3] Robert Arns (1998), Engineering Science and Education Journal, pp. 152-166.
[4] Uda Hashim & Ibrahim Ahmad, Silicon Photocell Fabrication Using Sacrificial Photoresist Lift-off Process: An Alternative. Pp.156-176.
[5] Osmann A., Simon J., Reichl H., 1993. The Pretreatment of Aluminum Bondpads for Electroless Nickel Bumping. Proceeding Multi-Chip Module Conference, MCMC-93 2: pp 74-48.
[6] Simon J., Zakel E., Reichl H., 1990. Electroless Deposition of Bumpss for TAB Technology. Proceeding Electronic Components and Technology Conference 40 : pp. 412-417 (1).
[7] W. Riedel, Electroless Nickel Plating, American Electroplaters and Surface Finishers Society (1990).
[8] T. Pearson and S. J. Wake, Improvements in the pretreatment of aluminum as a substrate for electrodeposition, Trans. Inst. Met. Fin., vol. 75, pp. 93–97, 1997.
[9] F. J. Monteiro and D. H. Ross, A study of modified alloy zincate pretreatments for plating aluminum part I, Trans. Inst. Met. Fin., vol. 62, pp. 98–103, 1984
[10] Hutt D.A., Liu C., Conway P.P., Whalley D.C., Mannan S.H., 2002. Electroless Nickel Bumping of Aluminum Bond Pads – II. Electroless Nickel Plating.
Components and Packaging Technologies, IEEE Transaction 25 (1) : pp 98-105 [11] K. P. Thurlow, “Electroless nickel plating on aluminum connectors,” Trans. Inst.
Met. Fin., vol. 67, pp. 82–86, 1989.
73
[12] F. J. Monteiro, M. A. Barbosa, D. H. Ross, and D. R. Gabe, Pretreatments to improve the adhesion of electrodeposits on aluminum, Surf. Interface Anal., vol. 17, pp. 519–528, 1991
[13] E. Zakel, J. Lau, and H. Reichl, Flip Chip Technologies, Ed. New York: McGraw- Hill, 1995, pp. 415–490.
[14] Martyak NM, McCaskie JE. Removal of orthophosphite ions from electroless nickel plating baths. International Patent WO98/21381, 1998.
[15] Valayil SP, Aronson V. Electroless nickel plating. European patent application, publication number 0114986, 1984.
[16] Lau JH, editorFlip chip technologies. New York, United States of America: Mc- Graw Hill International; 1996. p. 435.
[17] Law SPC, Cai J, Chan PCH. The effect of passivation defect on electroless nickel under bump metallization plating process, 2004. Available from:
http://www.ee.ust.hk/~flipchip/ctu_simon.doc [accessed 20.02.07].
[18] Jin JG, Lee SK, Kim YH. Adhesion improvement of electroless plated Ni layer by ultrasonic agitation during zincating process. Thin Solid Films 2004;466(1–2):272–
8.
[19] Lee S-K, Jin J-G, Kim Y-H, Lee J-H. A study on the nucleation behavior of zinc particles on aluminum substrate. In: International symposium on electronics material and packaging, EMAP 2001, 19–22 November 2001. p. 73–8 [20] Haydo J. Paneccasio Jr V, Cacciatore PA. Zincate Solutions for Treatment of
Aluminum and Aluminum Alloys.US Patent Number 5,182,006, January 26,1993.
74
