• Tidak ada hasil yang ditemukan

Mechanical properties and wear behavior of brake pads produced palm slag

N/A
N/A
Info
Unduh - Bebas
Protected

Academic year: 2024

Membagikan "Mechanical properties and wear behavior of brake pads produced palm slag"

Copied!
1
0
0

Memuat.... (Lihat teks lengkap sekarang)

Unduh sekarang ( 1 Halaman )

Teks penuh

(1)

Mechanical properties and wear behavior of brake pads produced palm slag

Abstract

Brake pads are important safety devices in vehicles. An effort to avoid the use of asbestos in brake pads has led to the development of asbestos-free brake pads that incorporate various organic and inorganic fillers. Palm slag as a filler in brake pads was investigated in this paper.

Different processing pressures were employed during production of samples through compression molding. The properties examined included hardness, compressive strength, and wear behavior. The results showed that brake pad samples prepared with 60 tons of compression pressure resulted in the most desirable properties. Hence, palm slag has its own potential for use as a filler in asbestos-free brake pads.

Referensi

Unduh sekarang ( PDF - 1 Halaman - 8.79 KB )

Dokumen terkait

Potential of palm kernel activated carbon epoxy (PKAC-E) composite as solid lubricant: Effect of load on friction and wear properties.

Potential of palm kernel activated carbon epoxy (PKAC-E) composite as solid lubricant: Effect of load on friction and wear

The Effect on Friction Coefficient and Wear Rate of Palm Kernel Activated Carbon-Epoxy (PKAC-E) Composite at Different Temperatures.

The purpose of this study is to investigate the tribological effect on friction coefficient and wear rate of Palm Kernel Activated Carbon-Epoxy (PKAC-E) composite

Microstructure, mechanical properties and wear performance of AZ31 matrix composites reinforced by graphene nanoplatelets(GNPs)

The compressive strength, microhardness, the coefficient of friction and wear rate of the composites are noticeably improved, compared to the matrix alloy of AZ31.. GNP content is the

FUEL AnD ASH PROPERTiES OF BiOCHAR PRODUCED FROM MiCROWAVE-ASSiSTED CARBOniSATiOn OF OiL PALM TRUnK CORE

Comparison of biochar yield from oil palm trunk core OPTC under various carbonisation temperature and microwave power for a 4 cm cube and b 6 cm cube... earlier study on oil palm shell

Mechanical and Wear Properties of Carburized Mild Steel Samples

3.6 Tempering of carburized mild steel samples 22 3.7 Abrasive wear test 23 3.8 Hardness test 25 3.9 Tensile test 26 3.9.1 Machine parameters of Instron 1195 26 3.9.2 Dimension

Effectiveness of Using Slag as Coarse Aggregate and Study of its Impact on Mechanical Properties of Concrete

Tensile Strength Fig.4 to Fig.6 shows the variation of tensile strength of different grades of modar with different slag content as partial replacement of coarse aggregate for various

View of Influence of Multiwall Carbon Nanotube on mechanical and wear properties of Copper – Iron composite

Many researchers have investigated the wear and mechanical characteristics of copper matrix composite reinforced with CNTs; however, the wear and mechanical characteristics of hybrid

Fabrication and mechanical properties of composite palm ash mixed with phenolic resins

Eksperiments: Six types of raw material such as palm ash, CaCO3, phenolic resin, Al2O3, graphite and steel fiber were used to fabricate composite samples for brake pad.. Palm ash was