To perform planned and preventive maintenance program  To involves in troubleshooting and repairing of rotating equipment

(1) Operation Technician

Responsibilities:

 Operate and monitor the plant equipment operation

 Plant patrolling and collect field data

 Recognize and identify any situation or problem(s) that may lead to safety equipment and/or products quality

 Check product sample and check the quality / make necessary adjustment to meet the specification

 Check and identify plants equipment for maintain and raise work request

 Carry out housekeeping and equipment cleaning

 Issue safe work permit / safety watch

 Start-up / Shutdown / commissioning of equipment

 Log book recording & hand over

 Assists at other areas when needed

 Carry out assignment from superior

 Check selected rotating equipment’s. Top up lube oil and seal oil when required.

 Carry out selected flange tightening when required

 Carry out routine preventive, corrective maintenance & monitoring on selected rotating equipment

Requirements:

 Diploma in Chemical / Mechanical Engineering or equivalent.

 At least 2 year(s) of working experience in the related field is required for this position.

 Able to work on 12 hours Rotating Shift.

(2) Mechanical Technician

Responsibilities:

 Maintain workshop machinery reliability and ensure excellence workshop machinery and tools’ room housekeeping.

 To perform planned and preventive maintenance program

 To involves in troubleshooting and repairing of rotating equipment.

 To perform daily fabrication and machining activities & complete on time.

 To assist supervisor to troubleshooting on equipment failures to determine root cause and implement corrective measures.

 To perform other duties and responsibilities given from superior.

Requirements:

 Diploma in Mechanical Engineering or equivalent.

 At least 5 year(s) of hand-on experience in handling rotary machinery and precision machining using conventional lathe, milling, shaping, surface grinder and radial drilling.

 Good knowledge in repair pumps, air compressors, heat exchangers, PSV & fabrication

 Acquire skill in sharpening tools like drill bit and lathe related tool bits/cutter and creative in fabricate special tools holder when handling abnormal shape work piece.

 Familiar with rotating equipment condition monitoring, mainly vibration analysis and lube oil analysis

 Knowledge on Static equipment is an added advantage

 Able to manage contractors with good people skill.

 Able to read and interpret engineering drawing.

(3) Instrument Technician

Responsibilities:

 Assist Instrument Superintendent in carrying out troubleshooting of equipment of repetitive failures.

 Contact vendors for assistance in resolving difficult problem which require their specialized skills and knowledge Review the adequacy / availability of critical spare parts.

 Plan, prepare and executive preventive maintenance programs on time based basis to enhance the reliability of the equipment.

Perform other duties as and when required and directed by Instrument Superintendent.

 Actively manage controls activities on site during operation

maintenance, including but not limited to oversight of installation, maintenance, troubleshooting and diagnostics of DCS auxiliary system

 Understand PLC ladder logic, including basic understanding of how to navigate through ladder rungs while troubleshooting

 Read and interpret electrical/mechanical flow and instrument diagrams

 Provide knowledge of turbine instrumentation calibration, including various types of transmitters

 Provide technical expertise to engineers, technicians, and operators

 Ensure competence levels are maintained in line with DCS access accreditation and ensure any deficiencies are identified and

addressed through development plans.

Requirements:

 Diploma in Electrical / Electronic /Instrumentation Engineering or Equivalent.

 Min 5 years’ experience in instrumentation and control

(4) Lab Technician

Responsibilities:

 To adhere and enforce safety rules and procedures by adopting established safety code and practices and regulatory requirements to ensure all employees working in safe & sound environment.

 To carry out all laboratory/machine shop analysis / processes assigned by immediate supervisor as according to standard operating procedures and maintain all data generated.

 Maintaining and replenishing the sufficient stock of

laboratory/machine shop equipment parts, chemicals, consumable items, glassware and others.

 Maintain good housekeeping and discipline in the laboratory/machine shop and its vicinity.

 To perform and report any abnormality during testing/ in laboratory/machine shop to the immediate superior.

 To carry out equipment verification and maintenance tasks.

 To assist in writing, implementing of operating procedures and work instruction.

 To execute the assignments delegated by the supervisor competently.

Requirements:

 Diploma in Science or Material Science.

 Able to communicate in English.

 Analytical or physical knowledge preferable.

 Possesses data entry & basic computer knowledge.

 Able to work independently and highly cooperative.

(5) Electrical Technician (Chargeman A0 - A4)

Responsibilities:

 To execute corrective, preventive & shutdown maintenance work as instructed by superior

 To perform switching, energization, isolations, troubleshooting and fault finding of electrical equipment

 To periodically check & update critical spare parts inventory and propose additional critical stock requirement in warehouse

 To maintain and ensure good housekeeping at plant site, substation and other electrical associated rooms

 To carry out preventive maintenance on air conditioner units in the substations and plant premises

 To perform motor greasing in accordance with running hour

 To perform daily data recording of electrical equipment in daily log sheet for condition monitoring program

 To attend any plant emergency electrical activities and carry out any other duties and responsibilities required by superior

Requirements:

 Diploma in Electrical Engineering and A0 - A4 CHARGEMAN Certificate

 Minimum 1-3 years working experience in Maintenance low and high voltage system.

 Knowledge of electrical installation will be an added advantage.

(6) Mechanical Engineer (Rotating)

Responsibility

 Preventive & Predictive Maintenance (PM) activities supervision &

execution

 Planning on daily work based on preventive and predictive

maintenance schedule and communicate with plant operation team to execute PM activities

 Provide comprehensive & concise report after finding

 Interpret instruction manual & simplify into a checklist Requirements

 Degree in Mechanical Engineering from Reputable University Or Equivalent

 3 – 5 years’ experience in process / petrochemical / refinery life plant

 Well verse in rotating equipment repair mainly pump, compressor, steam turbine, blower, fan, cooling tower, gearbox.

 Certified with minimum Vibration Analysis ISO category 2 in a MANDATORY.

 Familiar with SAP Maintenance Module

 Familiar with rotating equipment condition monitoring, mainly vibration analysis and lube oil analysis (viscosity)

(7) Safety Engineer

Responsibilities:

 To adhere and enforce safety rules and procedures by adopting established safety code and practices and regulatory requirement to all employees working in safe and sound environment

 Conduct safety promotion, awareness with day-to-day monitoring and enforcement for safety procedures, rules and regulations to meet good safety standard

 Day to day permitting approval for hot work, confined space entry, excavation works and any related safety permitting

 Inspection of scaffolding, safety audits and other safety related activities

 Conduct SOC for contractors, project punch listing and follow up with completion items of outstanding items

Requirements:

 Degree in Chemical Engineering Or Equivalent

 Attending SHO Course / Registered SHO

 2 - 5 years experience in a petrochemical/ oil & gas/ heavy industry

 Competent in Safety & Health technical knowledge

 Well versed with OSHA legal requirements and other Industry Code of Practices

(8) Environment Engineer

Responsibilities:

 Develops and implements Environmental Monitoring Program for Lotte Chemical Titan Complex.

 Prepares and maintains the complete list of all Waste generated from Lotte Chemical Titan Complex.

 Plans and conducts in-house audit and leads the team to investigate when the monitoring results show non-compliance and advices plant personnel on corrective actions.

 Establishes, plans and conducts Environmental Awareness Program for plants employees.

 Prepares monthly report on waste generated, effluent, sewage and other environmental monitoring at Lotte Chemical Titan Complex and develops programs to reduce waste generation.

 Leads and ensure continuous and effective implementation of ISO14001 EMS.

 Coordinates and work closely with Technical engineers to identify and upgrade the existing environmental facilities to meet the DOE standards.

 Designs and organizes internal responsible care award programs.

 Establishes, provides and participates with Lotte Chemical Titan management in communicating with Public and Government agencies in matters pertaining to environment.

 Actively supports, reviews and provides necessary technical

information and guidance on the DEIA and EMP of the new projects in coordination with the project team and DOE registered

consultants.

 Closely monitors project sites to ensure compliance to the DEIA/EMP requirements on the mitigation measures and environmental

monitoring especially during construction, commissioning and operation.

Requirements:

 Degree in Chemical Engineering / Environmental Engineering At least 5 year(s) of working experience in the related field in petrochemical plant

 Familiar with the Environment Act and its Regulations

 Preferably knowledgeable on ISO14001 EMS

 With experience in biological waste water treatment plant is an advantage

 Preferably with Ce-PIETSO( waste water treatment plant) and Ce- PSWaM (scheduled waste management)

(9) Procurement / Purchasing Executive

Job Description

 Source, evaluate and select reliable vendor according to company purchasing policy and procedure

 Negotiate with vendor for best terms, conditions (price, delivery, quality and services)

 Maintain an effective bridge between vendors and user dept to ensure relevant information conveyed

 Give suggestions or constructive ideas and solutions to dept manager when necessary

 Handle quality rejection and other problems with vendors

 Handle the assigned purchasing section’s procurement function and routine matters

 Evaluate potential vendor in the selection process

 Expediting deliveries of Purchase Orders

 Any other duties assigned by department Manager

Requirements

 Degree holder in Engineering / Business / Logistic / Transportation.

 At least 3 years’ working experience in procurement functions, preferably in petrochemical industry

 Good interpersonal skills and positive working attitude.

 Team player and able to work independently

 Familiar with Microsoft software applications (Word, Excel & PowerPoint).

 Fresh graduates are welcome to apply

 1 Full-Time position(s) available.

(10) Internship 2023

Requirement

• Degree in Chemical Engineering / Mechanical Engineering / Electrical Engineering / Instrumentation Or Equivalent

• Good attitude and willing to take on extra assignments

• A Team player to handle people and project well

• Proficient in Ms Office Application

• No work experience required.