• Tidak ada hasil yang ditemukan

Thermal properties of Sn-0.7Cu/re-Al composite lead-free solder

N/A
N/A
Info
Unduh - Bebas
Protected

Academic year: 2024

Membagikan "Thermal properties of Sn-0.7Cu/re-Al composite lead-free solder"

Copied!
1
0
0

Memuat.... (Lihat teks lengkap sekarang)

Unduh sekarang ( 1 Halaman )

Teks penuh

(1)

Advanced Materials Research, vol.795, 2013, pages 451-454

Thermal properties of Sn-0.7Cu/re-Al composite lead-free solder

Abstract

Composite approach in lead-free solder development was perceived as an expectation in finding new robust solder. Accordingly, Sn-0.7Cu/re-Al composite lead-free solder with varying amount of recycled-Aluminium (0, 3.0, 3.5 and 4.0 wt. % re-Al) particulates produced from aluminium beverage cans were successfully fabricated via powder metallurgy techniques in this study. This paper focuses on the thermal properties focusing on the melting temperature of the new developed Sn-0.7Cu/re-Al lead-free composite solder. The melting temperature (Tm) of the new solders was determined using differential scanning calorimetry (DSC). The melting temperature of the composite solders has showed comparable results with the monolithic solders of Sn-0.7Cu lead-free solder.

Keywords — Lead-free composite solder, melting temperature, recycled-aluminium.

Referensi

Unduh sekarang ( PDF - 1 Halaman - 136.16 KB )

Dokumen terkait

Role Of Intermetallic Compound On Thermal Crack Propagation Of Lead Free Solders.

Furthermore, this project will provide an understanding of the failure mode mechanism of lead free solder particularly on the IMC layer morphology and the role of the IMC

Electronic and Optical Properties of Lead-Free

In this work, the electronic and optical properties of the triclinic lead-free hybrid halide perovskite CH3NH3SnI3as a solar cell absorber has been investigated using density functional

Flexural analysis of polyurethane foam and sandwich composite foam via experimental and finite element Cmethods

Advanced Materials Research, vol.795, 2013, pages 526-529 Flexural analysis of polyurethane foam and sandwich composite foam via experimental and finite element Cmethods Abstract

PDF Mechanical Properties of Sn-0.7Cu-xZn Solder Joint

The addition of Zn into Sn-0.7Cu solder alloy resulted in the phase Cu-Zn primary intermetallic IMCs forming after the reflow process, and when the annealing time in- creased, the Cu-Zn

The effect of different alkaline treatment condition on flexural properties of kenaf bast- unsaturated polyester composite

795, 2013, pages 631-634 The effect of different alkaline treatment condition on flexural properties of kenaf bast- unsaturated polyester composite Abstract The biocomposites were

Isothermal aging affect to the growth of Sn-Cu-Ni-1 wt. % TiO2 composite solder paste

The IMCs thickness and scallop diameter of composite solder paste were reduced and the growth of IMCs thickness after isothermal aging become slower as compared to unreinforced Sn-Cu-Ni

The outcome of sintering parameters study toward the thermal properties of CuSiC composite

Key Engineering Materials, vol.594-595, 2014, pages 702-706 The outcome of sintering parameters study toward the thermal properties of CuSiC composite Abstract Miniaturisation of