Smartwire Resilient Data Transport

FOOD SECURITY Development of a Dipstick

Project 4: Smartwire Resilient Data Transport

- Improve harvesting model to consider realistic components - Implementation of Contiki/Cooja-platform wireless simulation sensor node - Develop and implement an integrated power line and RF

Energy harvesting SmartWire sensor node

- Develop and implement an integrated computation and communication subsystem for power line and Radio frequency communication

- Design and develop the MAC protocol and Cross-Layer module for a large-scale SmartWire sensor network

Page 19 of 25

Department Department of Science and Technology X Current Year Appropriations

Agency Philippine Council for Industry, Energy and Emerging Technology Research and Development Supplemental Appropriations

Operating Unit Continuing Appropriations

Organization Code (UACS) 19-013 Off-Budget Account

2 3 4 5 6 7=(3+4+5+6) 8 9 10 11 12=(8+9+1

0+11)

13 14

4th Quarter 1st Quarter

Particulars

4th Quarter

As of March 31, 2015

Physical Targets

Total Total

Variance as of March

2015 Physical Accomplishments

3rd Quarter 2nd Quarter

2nd Quarter 1

1st Quarter

BAR No. 1 QUARTERLY PHYSICAL REPORT OF OPERATION

UACS

CODE Remarks

3rd Quarter

Optimization of

Saccharification,Fermentati on and Purification processes for Pilot Scale Ethanol Production from Lignocellulosic Materials

- The saccharification reactor increases the amount of solids incorporated, improves substrate-enzyme contact and improves mixing

- The use of the saccharification Reactor improved the

performance of the enzymatic saccharification Synthesis of Carbon

Nanotubes (CNT) - Silicon Heterojunction for the Fabication and Assembly of a Solar Panel

- 100 % of EM, XPS and AFM were done to analyzed the structure and composition of the CVD-grown CNT films - Already grown CNT using the new CVD furnace system.

Currently optimizing the growth of the CNT particularly in the CNT yield

- Optimum process and optimum conditions for bench-scale ethanol fermentation

- Scale-up design from bench scale data for future pilotscale studies

Program on Fuel Ethanol Production from Lignocellulosic Feedstocks

- Pristine, high-density and predominantly semiconducting CNT film

- Optimized heterojunction characteristics for solar cell applications

- Solar Module Prototype

Page 20 of 25

Department Department of Science and Technology X Current Year Appropriations

Agency Philippine Council for Industry, Energy and Emerging Technology Research and Development Supplemental Appropriations

Operating Unit Continuing Appropriations

Organization Code (UACS) 19-013 Off-Budget Account

2 3 4 5 6 7=(3+4+5+6) 8 9 10 11 12=(8+9+1

0+11)

13 14

4th Quarter 1st Quarter

Particulars

4th Quarter

As of March 31, 2015

Physical Targets

Total Total

Variance as of March

2015 Physical Accomplishments

3rd Quarter 2nd Quarter

2nd Quarter 1

1st Quarter

BAR No. 1 QUARTERLY PHYSICAL REPORT OF OPERATION

UACS

CODE Remarks

3rd Quarter

A Graphene-Based Electrochemical

Supercapacitor for Solar Cells

- The laser scriber is already prepared and set up, as well.

- The synthesis and the characterization of LSG were done

- The synthesis and the characterization of LSG- Ecs were done and are being optimized Synthesis of Metal Nanowires

and Their Application in Foldable Transparent Conducting Electrode

- No progress report submitted as of 1st quarter of 2015 (Monitoring is done on a semestral basis) Flexible Nanohybrid

Supercapacitor Based on Conducting Polymers and Metal Oxides

- Synthesis of Polyvinyl alcohol, PVA as solid electrolyte

- Reached 60% in chracterization for Compositional analysis, Structural Analysis, & Electro chemical Impedance Measurement

- Synthesis of composite conducting polymer and metal oxides

- Superior quality Laser-Scribed Graphene

- Optimize Laser-Scribed Graphene Electrochemical cell (LSG-EC)

- Energy storage cell - Solar module

- Simple and low cost synthesis method for metal nanowires by chemical reduction at low temperature

- General concept for the oxidation-state control metal nanoparticle

- Cheap and efficient metal nanowire printing process at low temperature

- Preparation and characterization of solid electrolyte - Fabrication of nanocomposite materials based on conducting polymers and metal oxides

Page 21 of 25

Department Department of Science and Technology X Current Year Appropriations

Agency Philippine Council for Industry, Energy and Emerging Technology Research and Development Supplemental Appropriations

Operating Unit Continuing Appropriations

Organization Code (UACS) 19-013 Off-Budget Account

2 3 4 5 6 7=(3+4+5+6) 8 9 10 11 12=(8+9+1

0+11)

13 14

4th Quarter 1st Quarter

Particulars

4th Quarter

As of March 31, 2015

Physical Targets

Total Total

Variance as of March

2015 Physical Accomplishments

3rd Quarter 2nd Quarter

2nd Quarter 1

1st Quarter

BAR No. 1 QUARTERLY PHYSICAL REPORT OF OPERATION

UACS

CODE Remarks

3rd Quarter

Development of Ink Using Carbon from Straight Pyrolysis of Glycerol as Electrodes in Printed Electronics

- Design and fabrication of home-built furnace for larger scale pyrolysis of glycerol

- High resolution Transmission Electron Microscopy (TEM) of carbon from pyrolyzed glycerol

Development of Functional Nanocarbon-Based Catalysts for Biomass Conversion Processes

- Microwave induce plasma CNT production equipment undergoing thorough checking, re- starting, and tune up.

Development of a Philippine Metropolitan Advanced Travelers Information System (PhilMATIS)

- The server for the PhilMATIS was delivered last January 28, 2015

- On-going

adjustments/processing of the the data being retrieved to make 5 minutes interval for the data transmission - Database for the flood sensors for correlating traffic with on-

street flooding along Espana Boulevard

- Method of ink formulation and further characte-rization of carbon properties

- Characterization of hydrodynamic, drying properties of carbon ink formulations on different substrates

- Exploratory tests on potential applications of the carbon ink formulation

- Technical and theoretical research implementations - Synthesis of CNT using microwave induce plasma CVD apparatus

Intelligent Transport System (ITS) Program SUSTAINABLE MASS TRANSPORT

Page 22 of 25

Department Department of Science and Technology X Current Year Appropriations

Agency Philippine Council for Industry, Energy and Emerging Technology Research and Development Supplemental Appropriations

Operating Unit Continuing Appropriations

Organization Code (UACS) 19-013 Off-Budget Account

2 3 4 5 6 7=(3+4+5+6) 8 9 10 11 12=(8+9+1

0+11)

13 14

4th Quarter 1st Quarter

Particulars

4th Quarter

As of March 31, 2015

Physical Targets

Total Total

Variance as of March

2015 Physical Accomplishments

3rd Quarter 2nd Quarter

2nd Quarter 1

1st Quarter

BAR No. 1 QUARTERLY PHYSICAL REPORT OF OPERATION

UACS

CODE Remarks

3rd Quarter

Advanced Traffic &

Pollution Monitoring and Analysis System Based on GPS Data, Air Quality Data & Engine Status Data from Tracked Taxis in Metro Manila

- No progress report submitted as of 1st quarter of 2015

Integrated Optimal Scheduling of Public Transport System along a Route (PUBFix)

- No progress report submitted as of 1st quarter of 2015

Development of a Customized Local Simulator (LocalSim)

- Enhancements on user interface to create link and node network using QT and Visual Q++

(parallel exploration) - Initial codes written for user interface to build link and node representation of road network

Molecularly Imprinted Polymers (MIP) for the Targeted Purification of Natural Product Compounds

- No progress report submitted as of 1st quarter of 2015 - Preparation of MIPs for isolation of fractions of pure

compounds (lagundi, banaba and amplaya)

- Analysis, design, development and deployment of traffic prediction model

- Analysis, design, development and deployment of incident and accident detection model

- Inventory of the existing public transport system (city buses) and determine their service operating characteristics

- Pilot test the proposed scheduling scheme of city buses (whether by simulation or actual testing) along Epifanio de los Santos Avenue (EDSA) to determine its effectiveness - Web-based Public Transport Information System for the existing city bus operation in Metro Manila

- Agent-based traffic models - Calibrated traffic simulation model - Integrated ITS database platform

KRA No. 5 - Integrity of the Environment and Climate Change Mitigation and Adaption ENVIRONMENT, CLIMATE CHANGE & DISASTER RISK REDUCTION

Page 23 of 25

Department Department of Science and Technology X Current Year Appropriations

Agency Philippine Council for Industry, Energy and Emerging Technology Research and Development Supplemental Appropriations

Operating Unit Continuing Appropriations

Organization Code (UACS) 19-013 Off-Budget Account

2 3 4 5 6 7=(3+4+5+6) 8 9 10 11 12=(8+9+1

0+11)

13 14

4th Quarter 1st Quarter

Particulars

4th Quarter

As of March 31, 2015

Physical Targets

Total Total

Variance as of March

2015 Physical Accomplishments

3rd Quarter 2nd Quarter

2nd Quarter 1

1st Quarter

BAR No. 1 QUARTERLY PHYSICAL REPORT OF OPERATION

UACS

CODE Remarks

3rd Quarter

Design, Fabrication and Evaluation of Monitoring and Sampling Devices for Particulate Matter

- No progress report submitted as of 1st quarter of 2015 Radiation-induced grafting of

nonwoven fabrics for waste water treatment to meet Class C effluent heavy metal standards

- No progress report submitted as of 1st quarter of 2015

Design and Development of Aerial Mapping and Imaging Systems and Standards

- No progress report submitted as of 1st quarter of 2015 Project e-Bayanihan: A

Nationwide Web – Mobile Based System for Participatory Disaster Management

- No progress report submitted as of 1st quarter of 2016

Voices of Yolanda:

Narratives of disaster among the survivors of typhoon Yolanda in Eastern Visayas and Cebu, the Philippines

- Currently on datqa organization and analysis - Ethnography of disaster

- Risk maps

- Documented performance characteristics for the device - Functional prototypes (beta-grade)

- Optimum absorbed dose and monomer concentration obtained - Data for characterized grafted nonwoven fabric and results for initial batch adsorption test

- Research report/conference paper on findings

- Successful deployment and data gatehring on experimental sites - Design, build web based and mobile versions of PINOY PATROL 2.0

- Capacity building

Understanding And Communicating Risk for Community-based DRR Program

Page 24 of 25