Republic of the Philippines
MSU-ILIGAN INSTITUTE OF TECHNOLOGY
Office of the Bids and Awards Committee
Office of the BAC Secretariat, 3rd Flr, MSU-IIT Canteen Annex, Tibanga, Iligan City Telefax No. (063) 225-4926
I NVITATION T O B ID
A. The MSU- Iligan Institute of Technology through its Bids and Awards Committee invites interested suppliers to apply for eligibility and to bid for the hereunder project:
Name of Project : Supply of Data Acquisition System for COE
Location : MSU-Iligan Institute of Technology
Approved Budget : P1,307,500.00
Source of Fund : FIDUCIARY
Delivery Period : Twenty (20) days upon receipt of P.O.
Non-refundable Bidder Fee : 0.002 of the Approved Budget Cost
Reference No. : 2011 – 060
LOT 1 – DAQ Hardware (Modules and Accessories)
•
2 units USB CompactDAQ CHASSIS- 8 Slot USB CompactDAQ Chassis (NicDAQ-9178)
- Choose from more than 50 hot-swapple I/O modules with integrated signal conditioning - Four general purpose 32-bit counter/timers built into chassis (access through digital module)
- Run up to seven hardware-timed analog, I/O, digital I/O or counter/timer operations simultaneously
- Stream continuous waveform measurements with patented NI Signal Streaming technology
- Built-in BNC connections for external clocks and triggers (up to 1 MHz)
- Measure in minutes with NI-DAQmx software and automatic code generation using the DAQ Assistant
• 3 units THERMOCOUPLE MODULE
- 16-Ch Isothermal, 24-bit C series module (NI 9214)
- Isothermal terminal block (included) for measurement accuracy up to 0.45°C
- Several CJC sensors (co; d-junction compensation)
- 250 Vrms channel-to-earth ground safety isolation
- Autozero channel for offset error compensation
- 24-bit ADC for up to 0.02°C measurement sensitivity
- J, K, T, E, N, B, R and S types supported
• 3 units UNIVERSAL ANALOG INPUT MODULE
- 4 Ch-Ch Isolated, 24-bit, ±60V, 100S/s Universal Analog Input Module (NI9219)
- 250Vrms channel-to-channel isolation
- Built-in quarter, half, and full-bridge support
- Built-in voltage and current excitation
- Thermocouple, RTD, resistance, voltage, and current measurements
- CJC per channel for accurate thermocouple measurement
- 100 S/s/ch simultaneous inputs (50S/s/ch for thermocouple)
• 1 unit VOLTAGE MODULE
- Analog Input Module, 8 Ch, ±10V, 500kS/s, 12-Bit C series (NI 9201)
- Signal conditioning for high voltage (±60V), thermocouples, RTDs, accelerometers, microphones,
strain gages current inputs
- Advanced features such as smart TEDS sensor capability, antialiasing, filters, open-thermocouple detection
- ±10V, or ±60V analog input ranges - 12-, 16-, or 24-bit (delta-sigma) resolution
- Up to 800 kS/s multiplexed or up to 100 kS/s simultaneous sampling analog-to-digital converter (ADC)
- up to 32 channels per module
- up to 2,300 Vrms isolation (withstand), up to 250 Vrms isolation (continuous)
- NIST – traceable calibration certificate for guaranteed accuracy
• 2 units STRAIN AND BRIDGE MODULE (1/4 Bridge Input) - 120 ohm, 8-Ch, 24- Bit , ¼ Bridge Input Module ( NI 9235)
- 24-bit, simultaneous ADC’s
- 10kS/sch dynamic strain measurements
- Built-in voltage excitation for quarter-bridge sensors
- 120 Ω strain gage
1
• 2 units STRAIN AND BRIDGE MODULE (Full, Half-Bridge Input Module)
- 4-Ch 50 kS/s/Ch, 24-bit Bridge Al Module (NI 9237)
- 24-bit resolution, ±25 mV/V analog inputs with RJ50 connectors - 4 simultaneously sampled analog inputs; 50 kS/s maximum sampling rate - programmable half and full-bridge completion; up to 10V internal excitation - Smart-sensor (TEDS) compatible
- 1,000 Vrms transient isolation - 40 to 70 °C operating range
• 1 unit CURRENT INPUT MODULE
- 4 CH CURRENT INPUT, 5aMP, iso, 50K, 24bit ( NI 9227 ) - 50 kS/s/ch simultaneous inputs
- built-in antialias filters
- screw terminal connectors included, protective backshells sold separately - 250 Vrms channel-to-channel isolation
• 1 unit DIGITAL INPUT / OUTPUT MODULE
- 8-channel, 100 ns ultrahigh-speed, TTL digital Input / Output Module ( NI 9401) - 5 V/TTL, sinking / sourcing digital I/O
- bidirectional, configurable by nibble ( 4 bits) - industry standard 25-pin D-sub connector - hot-swappable operation
- -40 to 70 °C operating range
• 1 unit ACCELEROMETERS AND MICROPHONES MODULE
- 4 Input, 24-bit, 51.2 kS/s, SW Selectable IEPE & AC/DC (NI 9234) - 51.2 kS/s per-channel maximum sampling rate; ±5 V input
- 24-bit resolution; 102 db dynamic range, antialiasing filters - software-selectable AC/DC coupling; AC-coupled (0.5 Hz) - software-selectable IEPE signal conditioning ( 0 or 2 mA) - Smart TEDS sensor compatibility
- NIST-traceable calibration
• 1 unit COUNTER MODULE
- 6-CH ±5-24 V, 1 Mhz, 500 ns, Differential / Single-Ended digital Input module (NI 9411) - Hot-swappable operation
- extreme industrial certification / ratings - -40 to 70 °C operating range
•
1 unit PULSE GENERATION MODULE- 8-Ch 24 V, 100 us, sourcing Digital Output Module (NI 9472 with screw terminals) - D-Sub or screw-terminal connector options
- hot-swappable operation
- extreme industrial certifications / ratings - -40 to 70 °C operating range
• 2 units RUGGED CARRYING CASE FOR INSTRUMENTATION
- NI Compact DAQ chassis and modules shown in image are not included - rugged case with rubber seal for airtight / watertight closure
- removable foam inserts for customization
- designed with space for product and extra accessories - shoulder strap with metal clasp included
- molded lock insert for added security
• 2 units MOUNTING ACCESSORIES - Industrial enclosures - DIN – rail mounting kit - Desktop mounting kit - panel – mount kit
• 2 units NI 9932 Backshell with 10-pcs connector block
• 2 units NI 9965 Backshell for 24 Pos spring terminal
• 2 units NI 9965 Backshell for 24 Pos Spring term connector block
• 2 units RJ50 Cable for 9944, 9945 and 9949, 2 cm (qty 4)
•
1 unit NI 9971 Backshell for 2-Pos connector block (qty 4)• 1 unit NI 9934 25pin D-sub connector kit
•
3 units NI 9972 Backshell for 6-pos connector block (qty 4)• 1 unit NI 9935 15pin D-sub connector kit
