1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
A
B
C
D
T - 1 T - 1 T - 1 T - 4 T - 4 T - 1 T - 1 T - 1T - 2
T - 3 T - 3
T - 2 T - 2 T - 2 T - 2 T - 2 T - 2
USE 2" x 4" x 1.5mm C- PURLINS SPACED @ 600mm O.C.
NOTE:
1. PROVIDE 10mm SAG ROD AT MIDPOINT EACH SPAN
2. PROVIDE TURN BUCKLE
CONNECTING TOP CHORD OF TRUSS TO TOP OF COLUMN (BOTH SIDES) UNDER GRID LINE B.
3. ALL JOINTS SHALL BE CONNECTED BY 6-mm GUSSET PLATE AND
EACH.
4. MEMBER SHALL BE WELDED ON THE PLATE WITH 4-mm WELD THROAT USING E70XX
ELECTRODE WITH A MINIMUM WELD LENGTH OF 100mm FOR EACH ANGLE.
WP
16mm Ø A.Bolt Plate Washer for 16mm Bolt
1
4" (6mm) Thick A36 Gusset Plate
5
8" (16mm) Thick A 36 Base Plate (Attached also with Structual Grout)
16mm Ø Anchor Bolt with Washer
6mm Thick Gusset Plate 16mm Thick
A36 B.PL.
CONCRETE COLUMN
CONCRETE COLUMN
ELEVATION
SECTION
Apply Structural Grout
(Beneath the Base Plate and in all edges)
WP
TOP CHORD
WEB MEMBER 6mm THICK
A36 G. PL.
BATAAN PENINSULA STATE UNIVERSITY
TECHNICAL WORKING GROUP FOR INFRASTRUCTURE
DINALUPIHAN CAMPUS
UNIVERSITY PRESIDENT
DR. GREGORIO J. RODIS
VICE PRESIDENT ADMIN. & FINANCE
DR. EDMUNDO C. TUNGOL
APPROVED BY:
RECOMMENDED BY:
REVISION
NO.
2
DESCRIPTION DATE
SHEET CONTENT:
LOCATION:
AR. ROXETTE S. UMEREZ
PREPARED BY:
REVIEWED BY:
PROJECT TITLE:
DIRECTOR OF PPES
ENGR. ALFREDO D. VALENTOS
NOTED BY:
SHEET NUMBER:
BATAAN PENINSULA STATE UNIVERSITY,
REPAIR & REHABILITATION OF ACADEMIC BLDG. II AT DINA-
LUPIHAN CAMPUS
CAMPUS DIRECTOR
MR. BILLY ALIPIO
1
S-DC-05 ROOF FRAMING PLAN
TRUSS CONNECTION DETAIL
