Development of FeNiMoB thin film materials for microfabricated magnetoelastic sensors
Teks penuh
Dokumen terkait
Deposisi film tipis dengan penguapan dilakukan pada tekanan rendah sekitar (10 -3 -10 -10 torr); atom dan molekul dalam fase uap tidak bertabrakan satu sama lain di
Synthesis of polyamide thin film composite nanofiltration membrane for Arsenic removal Tran Le Hai*, Nguyen Thi Nguyen, Mai Thanh Phong ABSTRACT Arsen As is one of the most
LJXUH &RPSDULVRQ RI 0$3E, ILOP DQG 15 DUUD\V LQ WHUPV RI RSWLFDO SURSHUW\ DQG FU\VWDOOLQLW\ D 89±YLV DEVRUSWLRQ VSHFWUD RI 0$3E, ILOP 0$3E, 15V ZLWK 300$
Fig.12: Comparison between different built-in potential for ZnO/Si junctions at different substrate temperatures These results provide a suitable value of the built-in potential at
308 Table 1 The inks, print methods, substrates, test patterns, and curing parameters for experiments performed in this study Filler Material Print Method Substrate Test
Advanced Materials Research, vol.832, 2014, pages 124-127 Surface modification of titanium dioxide thin film for ss-DNA detection Abstract This paper studies the
XRD pattern of a as-deposited b annealed thin films Table 1: The average grain size of the Cu-doped SnS thin films predicted using Scherrer’s formula Cu doping wt% Grain size, D nm
These data from surface- sensitive tools suggest that electronic inhomogeneities in the VO2surface region are quite different from those inside the film and likely exhibit much slower
