• Tidak ada hasil yang ditemukan

Electrical Engineering

N/A
N/A
Protected

Academic year: 2023

Membagikan "Electrical Engineering"

Copied!
7
0
0

Teks penuh

(1)

Electrical Engineering

م ثحابلا مسا

ثحبلا ناونع رشنلا ناكم

ISI (Impact Factor) خيراتلا

1 Abdallah. G. Alharbi Ambipolar Leakage

suppression in Electron- Hole Bilayer TFET:

Investigation and Analysis Journal of Computational

Electronics, Springer 1.51

2018

Polarization Engineered Enhancement Mode GaN

HEMT: Design and Investigation Superlattices and

Microstructures Elsevier 2.1

2018

Electrostatically Doped DSL Schottky Barrier MOSFET on SOI for Low

Power Applications IEEE Journal of the

Electron Devices Society, 3.1

2017

Electrical Nonlinearity Emulation Technique for

Current-Controlled Memristive Devices IEEE Access,

3.2 2017

Hybrid AlGaN/GaN high- electron mobility transistor: design and

simulation, IET Circuits, Devices &

Systems 1.2

2017

Design, Simulation and the Comparative Analysis of Carbon Nanotube Field Effect Transistors Based

Multistage Operational Amplifiers Journal of Nanoelectronics

and Optoelectronics, 0.45

2017

DR. Ammar 2 Armghan Optical Negative-Index

Metamaterial Using CSRR by Incidenting the

Light Horizontally at Near-Infrared Domain Journal of Electromagnetic

Waves and Applications 0.96

2016

A narrow-band coherent perfect absorption in

bright–bright mode coupling metamaterials Journal of Optics

1.74 2016

Plasmon induced transparency and absorption in bright–

bright mode coupling metamaterials: a radiating

two-oscillator model analysis Journal of Physics D:

Applied Physics 2.85

2016

Backstepping based non- linear control for maximum power point tracking in photovoltaic

system Solar Energy

4.01 2017

(2)

3 DR. Ahmed Fathy A Novel Methodology for

Simulating Maximum Power Point Trackers

Using Mine Blast Optimization and Teaching Learning Based

Algorithms for Partially Shaded PV System Journal of Renewable and

Sustainable Energy 1.135

2016

A Reliable Methodology Based on Mine blast Optimization algorithm

for Optimal Sizing of Hybrid PV-Wind-FC System for Remote Area

in Egypt Renewable Energy

4.83 2016

An Improved Teaching Learning Based Optimization Algorithm

for Simulating the Maximum Power Point

Tracking Controller in Photovoltaic system The Egyptian International

Journal of Engineering Sciences and Technology 0.569

2016

An Optimal PV System Fed Water Pump Three Phase Induction Motor without Storage Systems

Based on TLBO Technique and ANN Solar Energy

4.018 2016

Simulation of global MPPT based on teaching–

learning-based optimization technique for partially shaded PV

system Electrical Engineering

0.569 2017

An efficient methodology for optimal reconfiguration of electric

distribution network considering reliability indices via binary particle

swarm gravity search algorithm Neural Comput & Applic.

2.505 2017

A comparison of different global MPPT techniques

based on meta-heuristic algorithms for photovoltaic system

subjected to partial shading conditions Renewable and Sustainable

Energy Reviews 8.050

2017

Grey Wolf Optimizer for Optimal Sizing and Siting of Energy Storage System in Electric Distribution

Network Electric Power Components

and Systems 1.22

2017

Optimal Gain Scheduling of VSC-HVDC System Sliding Mode Control via IET Gener. Transm. Distrib.

2.213 2017

(3)

Artificial Bee Colony and Mine Blast Algorithms

Single and Multi- Objective Operation Management of Micro-

Grid Using Krill Herd Optimization and Ant

Lion Optimizer Algorithms International Journal of

Energy and Environmental Engineering 0.895

2017

4 DR. Khaled Kaaniche Visual servoing based on

efficient histogram information SPRINGER

1.687 2017

Saliency based robust features for global visual

servoing Actapress

0.76 2016

2017

Developing new lifetime prolongation SVM algorithm for multilevel inverters with thermally aged

power devices IET Journal of Power

Electronics 3.547

DR. Emad 5 Mohammed ahmed Thermal and Reliability

Assessment for Wind Energy Systems with

DSTATCOM Functionality in Resilient Microgrids IEEE Transactions on

Sustainable Energy 4.9

2017

Thermal Stresses Relief Carrier-Based PWM Strategy for Single- Phase Multilevel Inverters IEEE Transactions on Powe

r Electronics 7.15

2017

Study and Analysis of New Three-Phase Modular Multi-Level

Inverter IEEE Transactions on indus

trial Power Electronics 7.168

2016

A Two State Feedback Active Damping Strategy

for the LCL Filter Resonance in Grid- Connected Converters Journal of Power

Electronics 1.047

2016

Eng.Hegazi Ibrahim 6 QoS Based IPTV Over

Mobile WiMAX Networks Wireless Personal

Communication (Springer Science- Business Media

New York 2017) 0.952

2017

(4)

ةيندملا ةسدنهلا مسقل ةيملعلا ثاحبلأاب ةمئاق

م ثحابلا مسا ثحبلا ناونع

رشنلا ناكم ISI

(Impact Factor) خيراتلا

1 Dr. Abdel Halim Azzam Influence of MEPDG Unbound

Material Type and Material Characterization Input Level on

Pavement Performance Journal of Transportation

Research Board, No. 2578, pp. 21–28, DOI:

10.3141/2578-03.

0.77 2016

Laboratory Characterization of Reclaimed Asphalt Pavement for

Road Construction in Egypt Canadian Journal of Civil

Engineering, (44), 417–425, dx.doi.org/10.1139/cjce-

2016-0435.

0.85 2017

"Discussion of "State-of-the-Art:

Prediction of Resilient Modulus of Unsaturated Subgrade Soils" by

Zhong Han and Sai K. Vanapalli International Journal of

Geomechanics, 17(11), 07017012, DoI:

10.1061/(ASCE)GM.1943- 5622.0000631.

1.26 2017

(5)

نيماع ةروشنملا ثاحبلأاب نايب 2017

- 2018 ةيكيناكيملا ةسدنهلا مسقب

م ثحابلا مسا

ثحبلا ناونع رشنلا ناكم

خيراتلا ISI

(Impact Factor)

1 DR. Imed Miraoui Effects of the laser cutting parameters on

the micro-hardness and on the heat affected zone of the mi-hardened steel International Journal of Advanced and Applied

Sciences 2017

ISI Journal

Long-unidirectional Palm and Sisal Fibers Reinforced Composite: An Experimental Investigation

Journal of Natural Fibers 2017

ISI-IF = 0.974

High-Power Laser Cutting of Steel Plates:

Hindawi Publishing Corporation 2016

ISI-IF = 1.3

Heat Affected Zone Analysis Advances in Materials Science and Engineering

2016 Scopus

0.91 ISI 1.299

Analysis of cut surface quality of sheet metals obtained by

Advances in Materials and Processing Technologies 2016

ISI-IF = 0.834

laser machining: thermal effects ARPN Journal of Engineering and Applied Sciences

2016 Scopus

0.37

NUMERICAL SIMULATION OF DROPLET DISPERSION AND EVAPORATION AND OF

AIR VELOCITY IN A JET BURNER Journal of Natural Fibers

2017 SJR-IF

(Scopus) = 0.21

2 DR. Saad A.A. Sayed The influence of magnetic field on the

mechanical properties &microstructure of plain carbon steel

Materials Science & Engineering A 2017

Scopus 3.39

Prediction of Strain Rate of Aluminum/Silicon Carbide Using Gray

Level Run- Length Matrices Journal of Energy Power Engineering

2017 Scopus

0.2

3 DR. Ahmad E. Eladawi Forming Temperature Investigation of

Aluminum and Aluminum/Silicon Carbide Using Image Texture Feature Advanced Structured Materials

2016 Scopus

0.19

Prediction of Strain Rate of Aluminum/Silicon Carbide Using Gray

Level Run- Length Matrices Journal of Energy Power Engineering

2016 Scopus

0.2

(6)

4 DR. M. Mosa

Variations of Air and Water Temperatures Across and Along the Pads

of Direct Evaporative Coolers and Their Effect on the Performance SSRG International Journal of Thermal Engineering

(SSRG-IJTE) 2016

0.35

5 DR. Ahmed Saleh Variations of Air and Water

Temperatures Across and Along the Pads of Direct Evaporative Coolers and Their

Effect on the Performance SSRG International Journal of Thermal Engineering

(SSRG-IJTE) 2016

0.35

6 DR. A. M. Soliman Performance analysis of different working

gases for concentrated solar gas engines Stirling& Bravton

Energy Conversion and Management 2017

5.589

Influence of solvent in the synthesis of nano- structured ZnO by hydrothermal method and their application in solar- still Journal of Environmental Chemical Engineering

2017 scopus

3.83

A novel study of using oil plants gases for thermal desalination and electric power

generation: Energy& cost evaluation Applied Energy

2017 7.182

DR. Mohamed Hanafy 7 El-Sayed Failure Analysis Investigation of Recycle

Compressor Cooler in a Gas Plant International Journal of Sciences: Basic and Applied

Research (IJSBAR) 2017

2.599

Flow enhanced corrosion of water injection pipelines Engineering Failure Analysis

2016 1.748

8 DR. T.M. Khass

Thermo-physical and kinetics parameters determination and gases emission s of

self-ignition of sieved rice husk of different sizes on a hot plate Asia-Pac. J. Chem. Eng

2017 scopus

1.05 0.836

9 DR. Ahmed Ghazy Solar desalination system of combined

solar still and humidification – dehumidification unit Heat and Mass Transfer

2016 1.233

The Thermal Protective Performance of Firefighters Clothing: The Air Gap between the Clothing and the Body Heat and Mass Transfer

2017 1.233

DR. Mahmoud A. M. 10 Youssef Influence of the specularity coefficient on

hydrodynamics and heat transfer in a conical fluidized bed combustor International Communication in Heat and Mass

Transfer 2016

4.03

Numerical study on heat transfer in a conical fluidized bed combustor

considering particle elasticity International Communication in Heat and Mass

Transfer 2016

4.03

(7)

Dr. Waleed 11 Abdelmaksoud Heat Transfer and Fluid Flow

Characteristics in a Heat Exchanger Tube Fitted With Inserts

Journal of Thermal Science and Engineering Applications

2018 0.985

Numerical Modeling and Performance Investigation for Compact Heat Exchangers in Different Fin Arrangement

and Fluid Flow Conditions Journal of Computational Thermal Sciences

2016 0.257

Referensi

Dokumen terkait

Phadke, “A novel adaptive current protection scheme for distribution systems with distributed generation,” International Journal of Electrical & Power Energy System, vol.

CONCLUSION This paper proposes a novel model for the planning of a resilient distribution system with hardening and distributed generation based on two-stage robust optimization to