BAB V HASIL DAN PEMBAHASAN
BAB 6 KESIMPULAN DAN SARAN
6.2 Saran
108
Berdasarkan kesimpulan pada sub-bab sebelumnya, saran yang dapat diberikan adalah:
a) Berdasarkan kesimpulan yang dapat diambil dari penelitian ini adalah areal yang paling beresiko terjadi perubahan struktur batuan berada pada jarak 0 sampai 23 meter dari baris akhir peledakan. Oleh karena itu jarak minimum dari lereng tambang sebaiknya diluar dari radius tersebut.
b) Perlu dilakukan simulasi berulang untuk beberapa variasi kekuatan batuan untuk memodelkan kestabilan lereng yang dipengaruhi oleh kerusakan batuan akibat peledakan ini. Perubahan secara horizontal dan vertical dapat dilakukan dengan memperbanyak lobang pengamatan, sehingga akurasi lebih baik lagi.
109
DAFTAR PUSTAKA
Andersson, P., (1992): Excavation disturbed zone in tunneling, SveBeFo Report No. 8 Swedish Rock Engineering Research, Stockholm.
Arief, I., (1997): Permodelan Struktur Alamiah, Bidang Spesialisasi Geomekanika, Program Studi Rekayasa Pertambangan, Program Pasca Sarjana, Institut Teknologi Bandung.
Arora, S., and Dey, K., (2010): Estimation of near-field peak particle velocity: A mathematical model, Journal of Geology and Mining Research Vol. 2(4), pp. 68-73.
Asosiasi Pertambangan Batubara Indonesia, (2011): DMO batubara tahun 2012 naik 3,8% menjadi 82,07 juta ton, http://www.apbi-icma.com, News, From the Media, Selasa, September 13, 2011.
Aydan, Omer, Kumsar, Halil, (2009): An Experimental and Theoretical Approach on the Modeling of Sliding Response of Rock Wedges under Dynamic Loading, Rock Mechanic Rock Engineering, DOI 10.1007/s00603-009-0043.
Barla, G., Barla, M., and Repetto, L., (1999): Continuum and discontinuum modeling for design analysis of tunnels, 9th Int. Congress on Rock Mech, Paris, France. Bauer A, Calder PN (1970): Open Pit Drilling and Blasting, Seminar Mining Engg.
Dept. publication, Queen’s University, Kingston, Ontario, p. 3.
Bauer, A. (1982): Wall control blasting in open pits, CIM Special 30, Canadian Institute of Mining and Metallurgy. In 14th Can, rock mechanics symposium (pp.3–10).
Belytschko, T. and T. Black (1999): Elastic Crack Growth in Finite Elements With Minimal Remeshing, International Journal for Numerical Methods in Engineering, Vol. 45(5), pp. 601-620.
Bieniawski, Z.T., (1973): Engineering Classification of Jointed Rock Masses, Trans. S. Afr. Inst Civil Eng. 15. Pp. 335-344.
Bieniawski, Z.T. & Orr, C.M., (1976): Rapid Site Appraisal for Dam Foundation by Geomechanics Classification, In Proc. 12 th Int. Congr. Large Dams, Q 46, R32, pp 483-501. ICOLD, Mexico (1976).
Bieniawski, Z.T., (1989): Engineering rock Mass Classifications, John-Willey, New York. Burchell, J.H, (1987): Explosive and Rock Blasting, Atlas Powder Company, Field
Technical Operation, Dallas, Texas U.S.A, hal. 375 - 406.
Blair D, Minchinton A (1996): On the damage zone surrounding a single blasthole, Proceedings of Rock fragmentation by blasting, FRAGBLAST-5, (Ed) Mohanty, Montreal, Quebec, Canada, 23-24 August, pp. 121-130.
Bogdanhoff, I., (1996): Vibration measurements in damage zone in tunnel blasting, Proceedings of Rock fragmentation by blasting, FRAGBLAST-5, (Ed) Mohanty, Montreal, Quebec, Canada, 23-24 August, pp. 177-185.
Brent, G.F and Smith, G.E., (2000): The detection of blast damage by borehole pressure measurement, The Journal of The South African Institute of Mining and Metallurgy.
Choudhury, D., Savoikar, P., (2010): Seismic Yield Accelerations of MSW Landfills by Pseudo-dynamic Approach, Springer Science Business Media B.V.
Chun-rui, Li., Li-junb, Kang., Qing-xing, Qi., De-bing, Mao., Quan-ming, Liu., Gang, Xu., (2009): The numerical analysis of borehole blasting and application in coal mine roof-weaken, The 6th International Conference on Mining Science & Technology, Procedia Earth and Planetary Science 1 (2009) 451– 459, Elsevier.
Da Gama, D.C., (2002): Prediction of EDZ (Excavation Damaged zone) from Explosive Detonation in Underground Opening, ISRM International Symposium on Rock Engineering for Mountainous Regions – Eurock 2002 Funchal, 2002 November 25-28.
Dey, K. and Murthy, V.M.S.R., (2011): Delineating rockmass damage zones in blasting from in-field seismic velocity and peak particle velocity measurement, International Journal of Engineering, Science and Technology Vol. 3, No. 2, pp. 51-62.
Dey, K. (2004): Investigation of blast-induced rock damage and development of predictive models in horizontal drivages. Unpublished Ph. D. thesis in Indian School of Mines. Dhanbad. pp. 45-103.
Dowding, C.H., (1985): Blast Vibration Monitoring and Control, Prentice-Hall, Inc., Englewood Cliffs, NJ 07632, pp. 6 – 8.
Edwards AT, Northwood TD (1960): Experimental studies of effects of blasting on structures, The Engineer, p. 211.
Ferrero, A.M., Migliazza, M., Tebaldi, G., (2010): Development of a New Experimental Apparatus for the Study of the Mechanical Behaviour of Rock Discontinuity Under Monotonic and Cyclic Loads.
Forsyth, W.W. and Moss, A.E. (Editors), (1991): Investigation of development blasting practices, CANMET MRL, 91 143 pp.
Forsyth, W.W. (Editor), (1993): A discussion on the blast induced overbreak around underground excavations, Rock Fragmentation by Blasting, FRAGBLAST 4, 161 166 pp.
Gate, W. C., Ortiz, B. L. T., & Florez, R. M. (2005): Analysis of rockfall and blasting backbreak problems. In Paper ARMA/USRMS, proceedings of the American rock mechanics conference, Vol. 5, pp. 671–680.
Hoek, E., (1983): Twenty third Rankine lecturer. Strength of jointed rock masses. Geotechnique, 33: 185 -222.
Hoek, E. and E.T. Brown, (1997): Practical estimates of rock mass strength. International Journal of Rock Mechanics and Mining Sciences, 34(8): p. 1165-1186.
Hoek, E. and Brown, E.T., (1980): Empirical strength criteria for rock masses. J. Geotech. Engng. Div., ASCE., 106: 1013 1035
Hoek, E., Carranza Toress, C. and Corkum, B., (2002): Hoek Brown failure criterion – 2002 edition, Proc. 5th. North American Rock Mechanics Symposium and 17th Tunneling Association of Canada Conference. ATM TAC 2002. University of Toronto, University of Toronto, pp. 267 271.
Holmberg, R., Persson, PA., (1979: Swedish approach to contour blasting, Proceedings of Fourth Conference on explosive and blasting techniques, pp. 113-127.
Holmberg, R. and Persson, P. A., (1980): Design of tunnel perimeter blasthole patterns to prevent rock damage. Transc. Inst. Min. Metall.: A37 A40.
Holmberg, R. and Maki, K., (1981): Case Examples of Blasting Damage and Its Influence on Slope Stability, Proceedings 3rd International Conference on Stability in Surface Mining, SME-AIME, New York.
Hudson, J.A. (1993): Comprehensive rock engineering: principles, practice, and projects, Imperial College of Science, Technology & Medicine, London, UK Jimeno, C. L., Jimeno, E. L., & Carcedo, F. J. A. (1995): Drilling and blasting of rocks,
Rotterdam: Balkema.
Konya, C. J. (2003): Rock blasting and overbreak control (2nd edition). USA: National Highway Institute, FHWA-HI-92-001.
Langefors, U. And Khilstrom, B. (1973): The Modern Technique of Rock Blasting, 2nd Edition, New York: Wiley, 405 pages.
Liu, E.L., (2010): Deformation and Breakage Properties of Crushable Blocky Material, Rock Mechanic Rock Engineering, DOI 10.1007/s00603-010-0117-3
Li, J., Ma, G., Xing, H., (2009): Analysis of Wave Propagation Through a Filled Rock Joint, Rock Mechanic Rock Engineering, DOI 10.1007/s 00603-009-003-5. Liang,Q., An, Y., Zhao, L, Li, D., Yan, L., (2010): Comparative Study on Clculation
Methods of Blasting Vibration Velocity, Rock Mechanic Rock Engineering, DOI 10.1007/s00603-010-0108-3.
Lubis, S., (2011): Kemandirian Industri Bahan Peledak di Indonesia Mendukung Aktifitas Pertambangan Indonesia, PERHAPI, Hotel Sultan Jakarta, 24 Januari 2011.
Lusk, B., Silva,J., Eltschlager, K., Hoffman, J., (2010): Acoustic Response of Structures to Blasting Analyzed Against Comfort Levels of Residents Near Surface Coal Operations, OSM Report, University of Kentucky Mining and Minerals Resources Building, Lexington, KY
MacKown, A.F., (1986): Perimeter controlled blasting for underground excavations in fractured and weathered rocks, Bull. Assoc. Engg. Geol. , XXIII(4): 461 478. Malmgren L, Saiang D, Toyra J, Bodare A (2007): The excavation disturbed zone (EDZ)
at Kiirunavaara mine, Sweden—by seismic measurements. J Appl Geophys 61(1):1–15.
Mark C., Iannacchione A.T. (2001): Best Practice to Mitigate, Injuries and Fatalities from Rock Falls, Paper in the Proceedings of the 20th International Conference on Ground Control in Mining 2001, NIOSH, Pittsburgh, PA. Martino, J.B., (2003a): The 2002 International EDZ Workshop: The excavation
damaged zone – cause and effects, Atomic Energy of Canada Limited. Martin A.C.T., et.al, (2003): Comparative Study of Structure Response to Coal Mine,
Office of Surface Mining Reclamation and Enforcement Appalachian Regional Coordinating Center, Pittsburgh, Pennsylvania
Martino, J.B., (2003b): The excavation damaged zone and recent studies at the URL. In: J.B. Martino (Editor), Proceedings of the 2002 International EDZ Workshop, Toronto.
Maxwell, S.C. and Young, R.P., (1998): Propagation effects of an underground excavation. Tectonophysics, 289(13): 17 30.
Meyer T, Dunn PG (1995). Fragmentation and rockmass damage assessment Sunburst excavator and drill and blast, Proceedings North American Rock Mechanics Symposium, pp. 609-616.
Monjezi, M., Rezaei, M., Yazdian, A., (2009): Prediction of backbreak in open-pit blasting using fuzzy set theory, Expert Systems with Applications 37 (2010) 2637–2643, Elsevier Ltd.
Monsen, K. and Barton, N., (2001): A numerical study of cryogenic storage in underground excavations with emphasis on the rock joint response, International Journal of Rock Mechanics & Mining Sciences, 38(7): 1035-1045.
Mojtabai, N. and Beatty, S., (1995): An Empirical Approach to Assessment of and Prediction of Damage in Bench Blasting, Transactions of The Institution of Mining and Metallurgy, Vol. 105, p A75-A80
Morris J., Glenn, L., Blair S., Heuze F., (2001): The Distinct Element Method - Application to Structures in Jointed Rock, International Workshop Meshfree Methods of Partial Differential Equations, Bonn, Germany, September 11 -14.
Murthy VMSR, Dey K (2002): Prediction of Overbreak in Underground Tunnel Blasting – A Case Study, North American Rock Mechanics Symposium2002, July 7 to July 10, Toronto, Canada, pp. 1499-1506.
Ohta, Y., Aydan, O, (2009): The Dynamic Responses of Geo-Materials during Fracturing and Slippage, Rock Mechanic Rock Engineering, DOI 10.1007/s00603-010-0095-4.
Oriard, L.L., (1982): Influence of Blasting on Slope Stability; State of the Art. Proceedings 3rd International Conference on Stability in Surface Mining, SME-AIME, New York, pp. 43-87.
Ozer, H., (2005), Wireless Sensor Networks for Crack Displacement Measurement, a Master Theses Field of Civil Engineering, NorthWestern University, Evanston, IL
Paventi M, Lizotte Y, Scoble M, Mohanty B (1996): Measuring Rockmass Damage in Drifting, Proceedings of Fifth International Symposium on Rock Fragmentation by Blasting, FRAGBLAST-5, (Ed) Mohanty, Montreal, Quebec, Canada, August 23-24, pp. 131-138.
Persson, P.A., Holmberg, R. and Lee, J., (1996): Rock Blasting and Explosives Engineering, CRC, Tokyo. 244 285 pp
Plis, M.N., Fletcher, L.R., Stachura, V.J. and Sterk, P.V., (1991): Overbreak control in VCR stopes at Homestake mine, 17th Conference on Explosives and Blasting Res., ISEE, pp. 19.
Potyondy, D.O. and Cundall, P.A., (2004): A bonded particle model for rock, International Journal of Rock Mechanics and Mining Sciences, 41(8): 1329 1364.
Pusdatin-ESDM, (2011): Statistik Batubara (2004 – 2011), Publikasi Kementrian Energy dan Sumberdaya Mineral, www.esdm.go.id.
Rai, M.A., Kramadibrata, S., Wattimena, R.K., (2011): TA 3111-Mekanika Batuan, Catatan Kuliah, Laboratorium Geomekanika dan Peralatan Tambang, Institut Teknologi Bandung.
Raina, A.K., Chakraborty, A.K., Ramulu, M. and Jethwa, J.L., (2000): Rock mass damage from underground blasting, a literature review, and lab and full scale tests to estimate crack depth by ultrasonic method. FRAGBLAST International Journal for Blasting and Fragmentation, 4: 103 125.
Ricketts, T.E., (1988): Estimating underground mine damage produced by blasting. 4th Mini Symp. on Explosive and Blasting Res., Soc. Explosive Engg., Anaheim, California, pp. 115.
Rustan, LN., (1985): Controlled blasting in hard intense jointed rock in tunnels, CIM Bulletin, Dec. 78(884): 63-68.
Saiang, D., (2004): Damaged Rock Zone Around Excavation Boundaries and its Interaction with Shotcrete. Licentiate Thesis Thesis, Luleå University of Technology, 121 pp.
Saiang, D., (2008b). Damaged rock zone around excavation boundaries, A progress report to Banverket, Division of Rock Mechanics & Rock Engineering, Luleå University of Technology.
Sato, T., Kikuchi, T. and Sugihara, K., (2000): In situ experiments on an excavation disturbed zone induced by mechanical excavation in Neogene sedimentary rock at Tono mine, central Japan. Engineering Geology, 56(1 2): 97 108.
Scoble, M.J., Lizotte, Y.C., Paventi, M. and Mohanty, B.B., (1997): Measurement of blast damage, Mining Engineering (June): 103-108.
Shen, B. and Barton, N., (1997): Disturbed zone around tunnels in jointed rock masses, International Journal of Rock Mechanics and Mining Sciences, 34(1): 117 125.
Sheng, Q., Yue, Z.Q., Lee, C.F., Tham, L.G. and Zhou, H., (2002): Estimating the excavation disturbed zone in the permanent shiplock slopes of the Three Gorges Project, China. International Journal of Rock Mechanics and Mining Sciences, 39(2): 165 184.
Sitharam, T.G., Sridevi, J. and Shimizu, N., (2001): Practical equivalent characterization of jointed rock mass. International Journal of Rock Mechanics and Mining Sciences, 38: 437 448.
Saiang, D., (2008), Damage Rock Zone Study - A progress report, Technical Report, Lulea University of Technology, Depertment of Civil, Mining and Environmental Engineering, division of rock mechanics.
Simangunsong, G.M., Yulianto, E., Kramadibrata, S., Matsui, K., Shimada, H., Kubota, S., Ogata, Y., (2004): Field Investigation of Blast-Induced Damage of the Sedimentary Strata Rock Mass at PT Kaltim Prima Coal, Indonesia’, First International Symposium on Explosion, Shock. Wave and Hypervelocity Phenomena (1st ESHP Symposium), Kumamoto University, Japan, March 15-17.
Siskind, D.E, Stagg, M.S., Kopp, J.W., dan Dowding, C.H., (1980): Structure Response and Damage Produced by Ground Vibration from Surface Mine Blasting, US Bureau of Mines Report of Investigation, Bulettin RI 8507.
Siskind, D.E, Stagg, M.S., (1985): Blast Vibration Measurement Near and On Structure Foundation, US Bureau of Mines Report of Investigation, Bulettin RI 8969 Siskind, D.E, Stachura, J.V, Nutting, M.J., (1987): Low-Frequency Vibration Produced
by Surface Mine Blasting over Abandoned Undergrounds Mines, US Bureau of Mines Report of Investigation, Bulettin RI 9078.
Siskind, D.E, Crum, S.V., Otterness, E., Kopp, J.W., (1989): Comparative Study of Blasting Vibration from Indiana Surface Coal Mines, US Bureau of Mines Report of Investigation, Bulettin RI 9226.
Siskind, D.E, Crum, S.V., Plis, M.N., (1993): Blast Vibration and other Potential Causes of Damage in Homes near a Large Surface Coal Mine in Indiana, US Bureau of Mines Report of Investigation, Bulettin RI 9455.
Siskind, D.E, Stagg, M.S., Wiegand, J.E., Schulz, D.L., (1994): Surface Mine Blasting near Pressurized Transmission Pipelines, US Bureau of Mines Report of Investigation, Bulettin RI 9523.
Siskind, D.E, Stagg, M.S., (2000): Assesment of Blast Vibration Impact from Quarry Blasting in Dade County, Blast Vibration Damage Assessment Study and Report, C3TS Project No. 1322-01.
Tonon, F., Amadei, B., Pan, E. and Frangopol, D.M., (2001): Bayesian estimation of rock mass boundary conditions with applications to the AECL underground research laboratory. International Journal of Rock Mechanics and Mining Sciences, 38(7): 995-1027.
Van Gool, B.S., (2007): Effect of Blasting on the Stability of Paste Fill Stopes at Cannington Mine, Dissertation Thesis for the degree of Doctor of Philosophy in the School of Engineering, James Cook University.
Waldron, M.J., (2006): Residential Crack Response to Vibrations from Underground Mining, a Master Theses Field of Civil Engineering, NorthWestern University, Evanston, IL.
Waisman, H., and T. Belytschko (2008): Parametric enrichment adaptivity by the extended finite element method, International Journal for Numerical Methods in Engineering, Vol. 73, pp 1671-1692.
Warneke, J., Dwyer, J.G. and Orr, T., (2007): Use of a 3 D scanning laser to quantify dift geometry and overbreak due to blast damage in underground manned entries. In: E. Eberhardt, D. Stead and T. Morrison (Editors), Rock Mechanics: Meeting Societys Challenges and Demands. Taylor & Francis Group, London, Vancouver, Canada, pp. 93-100.
Yang, RL., Rocque, P., Katsabanis, P., Bawden, WF., (1993): Blast damage study by measurement of blast vibration and damage in the area adjacent to blast hole. Proceedings of Fourth International seminar on Rock Fragmentation by Blasting, FRAGBLAST – 4, (Ed) Rossmanith, Vienna, Austria 5-8 July, pp. 137-144.
Young, R.P. and Collins, D.S., (2001): Seismic studies of rock fracture at the Underground Research Laboratory, Canada. International Journal of Rock Mechanics and Mining Sciences, 38(6): 787 799.
Yu, T.R. and Vongpaisal, S., (1996): New blast damage criteria for underground blasting. CIM Bulletin, 89(998): 139 145.
Zulfahmi, Astika, H., Mujahidin, S., (2009): Pengembangan Sistem dan Alat Pemantauan Sederhana untuk Mendeteksi Keruntuhan Batuan Atap (Roof Failure) pada Tambang Bawah Tanah, Kolokium Pertambangan 2009, Puslitbang Teknologi Mineral dan Batubara-tekMIRA, Bandung.