[1] (accessed 20 March, 2020) Sources of greenhouse gas emissions. [Online]. Available:
https://www.epa.gov/ghgemissions/sources-greenhouse-gas-emissions
[2] (accessed 20 March, 2020) Gas emissions from trans-
port in europe. [Online]. Available: https://www.eea.europa.
eu/data-and-maps/indicators/transport-emissions-of-greenhouse-gases/
transport-emissions-of-greenhouse-gases-12
[3] J. Y. Yong, V. K. Ramachandaramurthy, K. M. Tan, and N. Mithulananthan, “A review on the state-of-the-art technologies of electric vehicle, its impacts and prospects,” Renewable and sustainable energy reviews, vol. 49, pp. 365–385, 2015.
[4] (accessed 20 March, 2020) Energy technology perspectives 2010. [Online]. Available:
https://www.iea.org/publications/freepublications/publication/etp2010.pdf [5] (accessed 11 March, 2021) Iea (2021), global ev outlook 2021, iea, paris. [Online].
Available: https://www.iea.org/reports/global-ev-outlook-2021
[6] D. Vilathgamuwa and J. Sampath, “Wireless power transfer (wpt) for electric vehicles (evs)- present and future trends,” inPlug in electric vehicles in smart grids. Springer, 2015, pp. 33–60.
[7] L. Chen, G. R. Nagendra, J. T. Boys, and G. A. Covic, “Double-coupled systems for ipt roadway applications,”IEEE Journal of Emerging and Selected Topics in Power Electronics, vol. 3, no. 1, pp. 37–49, 2014.
[8] A. Khaligh and S. Dusmez, “Comprehensive topological analysis of conductive and inductive charging solutions for plug-in electric vehicles,”IEEE Transactions on Vehicular Technology, vol. 61, no. 8, pp. 3475–3489, 2012.
[9] B. Peschiera and S. S. Williamson, “Review of inductive power transfer technology for electric and plug-in hybrid electric vehicles,” inIECON 2013-39th Annual Conference of the IEEE Industrial Electronics Society. IEEE, 2013, pp. 4672–
4677.
[10] M. Yilmaz and P. T. Krein, “Review of battery charger topologies, charging power levels, and infrastructure for plug-in electric and hybrid vehicles,”IEEE trans- actions on Power Electronics, vol. 28, no. 5, pp. 2151–2169, 2012.
[11] (accessed 7 July, 2021) Sae electric vehicle and plug in hybrid electric vehicle conductive charge coupler. [Online]. Available: https://www.sae.org/standards/
content/j1772_201210/
[12] H. Wang, A. Hasanzadeh, and A. Khaligh, “Transportation electrification: Conduc- tive charging of electrified vehicles.”IEEE Electrification Magazine, vol. 1, no. 2, pp. 46–58, 2013.
[13] M. Etezadi-Amoli, K. Choma, and J. Stefani, “Rapid-charge electric-vehicle stations,”
IEEE transactions on power delivery, vol. 25, no. 3, pp. 1883–1887, 2010.
[14] D.-H. Kim, M.-J. Kim, and B.-K. Lee, “An integrated battery charger with high power density and efficiency for electric vehicles,”IEEE Transactions on Power Electronics, vol. 32, no. 6, pp. 4553–4565, 2016.
[15] H. Wang, S. Dusmez, and A. Khaligh, “Design and analysis of a full-bridge llc-based pev charger optimized for wide battery voltage range,”IEEE Transactions on Vehicular technology, vol. 63, no. 4, pp. 1603–1613, 2013.
[16] F. Musavi, W. Eberle, and W. G. Dunford, “A high-performance single-phase bridge- less interleaved pfc converter for plug-in hybrid electric vehicle battery chargers,”
IEEE Transactions on Industry Applications, vol. 47, no. 4, pp. 1833–1843, 2011.
[17] F. Musavi, M. Edington, W. Eberle, and W. G. Dunford, “Evaluation and efficiency comparison of front end ac-dc plug-in hybrid charger topologies,”IEEE Transac- tions on Smart grid, vol. 3, no. 1, pp. 413–421, 2011.
[18] C.-Y. Oh, D.-H. Kim, D.-G. Woo, W.-Y. Sung, Y.-S. Kim, and B.-K. Lee, “A high- efficient nonisolated single-stage on-board battery charger for electric vehicles,”
IEEE transactions on Power Electronics, vol. 28, no. 12, pp. 5746–5757, 2013.
[19] D. Fu, F. C. Lee, Y. Qiu, and F. Wang, “A novel high-power-density three-level lcc resonant converter with constant-power-factor-control for charging applications,”
IEEE Transactions on Power Electronics, vol. 23, no. 5, pp. 2411–2420, 2008.
[20] C.-C. Hua, Y.-H. Fang, and C.-W. Lin, “Llc resonant converter for electric vehicle battery chargers,”IET Power Electronics, vol. 9, no. 12, pp. 2369–2376, 2016.
[21] Z. U. Zahid, Z. M. Dalala, R. Chen, B. Chen, and J.-S. Lai, “Design of bidirectional dc–
dc resonant converter for vehicle-to-grid (v2g) applications,”IEEE Transactions on Transportation Electrification, vol. 1, no. 3, pp. 232–244, 2015.
[22] S. Zou, Z. Ma, X. Liu, and I. Hiskens, “An efficient game for coordinating electric vehicle charging,”IEEE Transactions on Automatic Control, vol. 62, no. 5, pp.
2374–2389, 2016.
[23] K. Klontz, A. Esser, P. Wolfs, and D. Divan, “Converter selection for electric vehicle charger systems with a high-frequency high-power link,” inProceedings of IEEE Power Electronics Specialist Conference-PESC’93. IEEE, 1993, pp. 855–861.
[24] K. Klontz, A. Esser, R. Bacon, D. Divan, D. Novotny, and R. Lorenz, “An electric ve- hicle charging system with’universal’inductive interface,” inConference Record of the Power Conversion Conference-Yokohama 1993. IEEE, 1993, pp. 227–232.
[25] H. Ayano, K. Yamamoto, N. Hino, and I. Yamato, “Highly efficient contactless electrical energy transmission system,” inIEEE 2002 28th Annual Conference of the Industrial Electronics Society. IECON 02, vol. 2. IEEE, 2002, pp. 1364–1369.
[26] J. G. Hayes, M. G. Egan, J. M. Murphy, S. E. Schulz, and J. T. Hall, “Wide-load- range resonant converter supplying the sae j-1773 electric vehicle inductive charging interface,”IEEE Transactions on Industry Applications, vol. 35, no. 4, pp. 884–895, 1999.
[27] H. Sakamoto, K. Harada, S. Washimiya, K. Takehara, Y. Matsuo, and F. Nakao,
“Large air-gap coupler for inductive charger for electric vehicles,”IEEE Transac- tions on Magnetics, vol. 35, no. 5, pp. 3526–3528, 1999.
[28] J. Kim, D.-H. Kim, and Y.-J. Park, “Analysis of capacitive impedance matching networks for simultaneous wireless power transfer to multiple devices,”IEEE Transactions on Industrial Electronics, vol. 62, no. 5, pp. 2807–2813, 2014.
[29] M. P. Kazmierkowski and A. J. Moradewicz, “Unplugged but connected: Review of contactless energy transfer systems,”IEEE Industrial Electronics Magazine, vol. 6, no. 4, pp. 47–55, 2012.
[30] T. Sawant, D. Pilankar, R. Sule, and S. Mahadeshwar, “An overview of technological advancements and future possibilities in wireless power transmission,”Interna- tional Journal of Research in Engineering and Technology (IJRET), vol. 2, no. 8, pp. 260–267, 2013.
[31] A. K. RamRakhyani, S. Mirabbasi, and M. Chiao, “Design and optimization of resonance-based efficient wireless power delivery systems for biomedical im- plants,”IEEE transactions on biomedical circuits and systems, vol. 5, no. 1, pp.
48–63, 2010.
[32] J. Kim, B. Lee, J. Lee, S. Lee, C. Park, S. Jung, S.M.and Lee, K. Yi, and J. Baek,
“Development of 1-mw inductive power transfer system for a high-speed train,”
IEEE Transactions on Industrial Electronics, vol. 62, no. 10, pp. 6242–6250, 2015.
[33] C. Zheng, H. Ma, J. Lai, and L. Zhang, “Design considerations to reduce gap variation and misalignment effects for the inductive power transfer system,”
IEEE Transactions on Power Electronics, vol. 30, no. 11, pp. 6108–6119, 2015.
[34] D. Ludois, M. Erickson, and J. Reed, “Aerodynamic fluid bearings for translational and rotating capacitors in noncontact capacitive power transfer systems,”EEE Transactions on Industry Applications, vol. 50, no. 2, pp. 1025–1033, 2013.
[35] J. Dai and D. Ludois, “A survey of wireless power transfer and a critical compar- ison of inductive and capacitive coupling for small gap applications,” IEEE Transactions on Power Electronics, vol. 30, no. 11, pp. 6017–6029, 2015.
[36] C. Mollan, J. Upton, and C. Brown, “The scientific apparatus of nicholas callan and other historic apparatus,”Annals of Science, vol. 52, no. 4, 1995.
[37] C.-J. Chen, T.-H. Chu, C.-L. Lin, and Z.-C. Jou, “A study of loosely coupled coils for wireless power transfer,”IEEE Transactions on Circuits and Systems II:
Express Briefs, vol. 57, no. 7, pp. 536–540, 2010.
[38] W. Zhang and C. C. Mi, “Compensation topologies of high-power wireless power transfer systems,”IEEE Transactions on Vehicular Technology, vol. 65, no. 6, pp. 4768–4778, 2015.
[39] J. Zhang, X. Yuan, C. Wang, and Y. He, “Comparative analysis of two-coil and three-coil structures for wireless power transfer,”IEEE Transactions on Power Electronics, vol. 32, no. 1, pp. 341–352, 2016.
[40] S. R. Hui and W. W. Ho, “A new generation of universal contactless battery charging platform for portable consumer electronic equipment,”IEEE Transactions on Power Electronics, vol. 20, no. 3, pp. 620–627, 2005.
[41] B. Choi, J. Nho, H. Cha, T. Ahn, and S. Choi, “Design and implementation of low- profile contactless battery charger using planar printed circuit board windings as energy transfer device,”IEEE Transactions on Industrial Electronics, vol. 51, no. 1, pp. 140–147, 2004.
[42] N.-C. Kuo, B. Zhao, and A. M. Niknejad, “Inductive wireless power transfer and uplink design for a cmos tag with 0.01 mm 2 coil size,”IEEE Microwave and Wireless Components Letters, vol. 26, no. 10, pp. 852–854, 2016.
[43] P. Si, A. P. Hu, S. Malpas, and D. Budgett, “A frequency control method for regulat- ing wireless power to implantable devices,”IEEE transactions on biomedical circuits and systems, vol. 2, no. 1, pp. 22–29, 2008.
[44] R. Jegadeesan, K. Agarwal, Y.-X. Guo, S.-C. Yen, and N. V. Thakor, “Wireless power delivery to flexible subcutaneous implants using capacitive coupling,”IEEE Transactions on Microwave Theory and Techniques, vol. 65, no. 1, pp. 280–292, 2016.
[45] D. Patil, M. K. Mcdonough, J. M. Miller, B. Fahimi, and P. T. Balsara, “Wireless power transfer for vehicular applications: Overview and challenges,” IEEE Transactions on Transportation Electrification, vol. 4, no. 1, pp. 3–37, 2017.
[46] S. Stoecklin, A. Yousaf, T. Volk, and L. Reindl, “Efficient wireless powering of biomedical sensor systems for multichannel brain implants,”IEEE Transactions on Instrumentation and Measurement, vol. 65, no. 4, pp. 754–764, 2015.
[47] L. Xie, Y. Shi, Y. T. Hou, and A. Lou, “Wireless power transfer and applications to sensor networks,”IEEE Wireless Communications, vol. 20, no. 4, pp. 140–145, 2013.
[48] S. Hui, “Planar wireless charging technology for portable electronic products and qi,”Proceedings of the IEEE, vol. 101, no. 6, pp. 1290–1301, 2013.
[49] T. Imura and Y. Hori, “Maximizing air gap and efficiency of magnetic resonant coupling for wireless power transfer using equivalent circuit and neumann formula,”IEEE Transactions on industrial electronics, vol. 58, no. 10, pp. 4746–
4752, 2011.
[50] S. Y. R. Hui, W. Zhong, and C. K. Lee, “A critical review of recent progress in mid-range wireless power transfer,”IEEE Transactions on Power Electronics, vol. 29, no. 9, pp. 4500–4511, 2013.
[51] A. Kurs, A. Karalis, R. Moffatt, J. D. Joannopoulos, P. Fisher, and M. Soljaˇci´c,
“Wireless power transfer via strongly coupled magnetic resonances,”science, vol.
317, no. 5834, pp. 83–86, 2007.
[52] F. Lu, H. Zhang, and C. Mi, “A review on the recent development of capacitive wireless power transfer technology,”Energies, vol. 10, no. 11, p. 1752, 2017.
[53] M. Kline, I. Izyumin, B. Boser, and S. Sanders, “Capacitive power transfer for contactless charging,” in2011 Twenty-Sixth Annual IEEE Applied Power Elec- tronics Conference and Exposition (APEC). IEEE, 2011, pp. 1398–1404.
[54] A. Z. Amanci, H. E. Ruda, and F. P. Dawson, “Galvanic isolation for high-frequency applications using an integrated dielectric structure,”IEEE Transactions on Power Electronics, vol. 31, no. 8, pp. 5797–5804, 2015.
[55] X. Chen-yang, L. Chao-wei, and Z. Juan, “Analysis of power transfer characteristic of capacitive power transfer system and inductively coupled power transfer system,” in 2011 International Conference on Mechatronic Science, Electric Engineering and Computer (MEC). IEEE, 2011, pp. 1281–1285.
[56] E. Culurciello and A. G. Andreou, “Capacitive inter-chip data and power transfer for 3-d vlsi,” IEEE Transactions on Circuits and Systems II: Express Briefs, vol. 53, no. 12, pp. 1348–1352, 2006.
[57] K. V. T. Piipponen, R. Sepponen, and P. Eskelinen, “A biosignal instrumentation system using capacitive coupling for power and signal isolation,”IEEE Transac- tions on Biomedical Engineering, vol. 54, no. 10, pp. 1822–1828, 2007.
[58] D. C. Ludois, J. K. Reed, and K. Hanson, “Capacitive power transfer for rotor field current in synchronous machines,” IEEE Transactions on Power Electronics, vol. 27, no. 11, pp. 4638–4645, 2012.
[59] C. Mi, “High power capacitive power transfer for electric vehicle charging applica- tions,” in2015 6th international conference on Power Electronics Systems and Applications (PESA). IEEE, 2015, pp. 1–4.
[60] J. Dai and D. C. Ludois, “Single active switch power electronics for kilowatt scale capacitive power transfer,”IEEE Journal of Emerging and Selected Topics in Power Electronics, vol. 3, no. 1, pp. 315–323, 2014.
[61] C. Liu and A. P. Hu, “Steady state analysis of a capacitively coupled contactless power transfer system,” in2009 IEEE energy conversion congress and exposition.
IEEE, 2009, pp. 3233–3238.
[62] B. H. Choi, D. T. Nguyen, S. J. Yoo, J. H. Kim, and C. T. Rim, “A novel source-side monitored capacitive power transfer system for contactless mobile charger using class-e converter,” in2014 IEEE 79th Vehicular Technology Conference (VTC Spring). IEEE, 2014, pp. 1–5.
[63] Y. Yusop, S. Saat, Z. Ghani, H. Husin, and S. K. Nguang, “Capacitive power transfer with impedance matching network,” in 2016 IEEE 12th International Collo- quium on Signal Processing & Its Applications (CSPA). IEEE, 2016, pp.
124–129.
[64] B. Chokkalingam, S. Padmanaban, Z. M. Leonowiczet al., “Class e power amplifier design and optimization for the capacitive coupled wireless power transfer system in biomedical implants,”Energies, vol. 10, no. 9, p. 1409, 2017.
[65] L. Huang, A. P. Hu, and A. Swain, “A resonant compensation method for improving the performance of capacitively coupled power transfer system,” in2014 IEEE Energy Conversion Congress and Exposition (ECCE). IEEE, 2014, pp. 870–875.
[66] J. Dai and D. C. Ludois, “Capacitive power transfer through a conformal bumper for electric vehicle charging,”IEEE Journal of Emerging and Selected Topics in Power Electronics, vol. 4, no. 3, pp. 1015–1025, 2015.
[67] Y. Yusop, H. Husin, S. Saat, S. K. Nguang, and Z. Ghani, “Class-e lccl for capacitive power transfer system,” in2016 IEEE International Conference on Power and Energy (PECon). IEEE, 2016, pp. 428–433.
[68] J. Zhu, M. Xu, J. Sun, and C. Wang, “Novel capacitor-isolated power converter,”
in2010 IEEE Energy Conversion Congress and Exposition. IEEE, 2010, pp.
1824–1829.
[69] C. Liu, A. P. Hu, G. A. Covic, and N.-K. C. Nair, “Comparative study of ccpt systems with two different inductor tuning positions,” IEEE Transactions on power electronics, vol. 27, no. 1, pp. 294–306, 2011.
[70] C. Liu and A. Hu, “Effect of series tuning inductor position on power transfer capability of ccpt system,”Electronics letters, vol. 47, no. 2, pp. 136–137, 2011.
[71] M. Siddique, S. Abdullah, and Q. Islam, “A comprehensive overview on the de- velopment of compensation topologies for capacitive power transfer system,”
Electrical and Electronic Engineering, 2019.
[72] F. Lu, H. Zhang, and C. Mi, “A two-plate capacitive wireless power transfer sys- tem for electric vehicle charging applications,” IEEE Transactions on Power Electronics, vol. 33, no. 2, pp. 964–969, 2017.
[73] F. Lu, H. Zhang, H. Hofmann, and C. C. Mi, “A double-sided lc-compensation circuit for loosely coupled capacitive power transfer,” IEEE transactions on power electronics, vol. 33, no. 2, pp. 1633–1643, 2017.
[74] H. Zhang, F. Lu, H. Hofmann, and C. Mi, “A loosely coupled capacitive power transfer system with lc compensation circuit topology,” in2016 IEEE Energy Conversion Congress and Exposition (ECCE). IEEE, 2016, pp. 1–5.
[75] B. Regensburger, A. Kumar, S. Sinha, K. Doubleday, S. Pervaiz, Z. Popovic, and K. Afridi, “High-performance large air-gap capacitive wireless power transfer system for electric vehicle charging,” in2017 IEEE Transportation Electrification Conference and Expo (ITEC). IEEE, 2017, pp. 638–643.
[76] M. P. Theodoridis, “Effective capacitive power transfer,” IEEE Transactions on Power Electronics, vol. 27, no. 12, pp. 4906–4913, 2012.
[77] H. Zhang, F. Lu, H. Hofmann, W. Liu, and C. C. Mi, “A four-plate compact capacitive coupler design and lcl-compensated topology for capacitive power transfer in electric vehicle charging application,”IEEE Transactions on Power Electronics, vol. 31, no. 12, pp. 8541–8551, 2016.
[78] F. Lu, H. Zhang, H. Hofmann, and C. Mi, “A double-sided lclc-compensated capaci- tive power transfer system for electric vehicle charging,”IEEE Transactions on Power Electronics, vol. 30, no. 11, pp. 6011–6014, 2015.
[79] ——, “A cllc-compensated high power and large air-gap capacitive power transfer system for electric vehicle charging applications,” in2016 IEEE applied power electronics conference and exposition (APEC). IEEE, 2016, pp. 1721–1725.
[80] L. Huang, A. P. Hu, A. K. Swain, and Y. Su, “Z-impedance compensation for wireless power transfer based on electric field,”IEEE Transactions on Power Electronics, vol. 31, no. 11, pp. 7556–7563, 2016.
[81] S. Goma, “Capacitive coupling powers transmission module,”Asia Electron. Ind., vol. 17, no. 194, pp. 20–23, 2012.
[82] H. Zhang, F. Lu, H. Hofmann, W. Liu, and C. C. Mi, “An lc-compensated electric field repeater for long-distance capacitive power transfer,”IEEE Transactions on Industry Applications, vol. 53, no. 5, pp. 4914–4922, 2017.
[83] K. Doubleday, A. Kumar, B. Regensburger, S. Pervaiz, S. Sinha, Z. Popovic, and K. K. Afridi, “Multi-objective optimization of capacitive wireless power transfer systems for electric vehicle charging,” in2017 IEEE 18th Workshop on Control and Modeling for Power Electronics (COMPEL). IEEE, 2017, pp. 1–8.
[84] X. Wu, Y. Su, A. P. Hu, X. Qing, and X. Hou, “Multi-objective parameter optimization of a four-plate capacitive power transfer system,”IEEE Journal of Emerging and Selected Topics in Power Electronics, 2020.
[85] D.-H. Kim and D. Ahn, “Optimization of capacitive wireless power transfer system for maximum efficiency,”Journal of Electrical Engineering & Technology, vol. 15, no. 1, pp. 343–352, 2020.
[86] Y.-G. Su, W. Zhou, Z.-H. Wang, X.-Y. Wu, and X.-D. Qing, “Parameter design method for capacitive power and signal transfer system based on multi-objective op- timisation algorithm,”IET Power Electronics, vol. 12, no. 10, pp. 2650–2659, 2019.
[87] B. Luo, A. P. Hu, H. Munir, Q. Zhu, R. Mai, and Z. He, “Compensation network design of cpt systems for achieving maximum power transfer under coupling voltage constraints,”IEEE Journal of Emerging and Selected Topics in Power Electronics, 2020.
[88] B. Luo, R. Mai, Y. Chen, Y. Zhang, and Z. He, “A voltage stress optimization method of capacitive power transfer charging system,” in 2017 IEEE Applied Power Electronics Conference and Exposition (APEC). IEEE, 2017, pp. 1456–1461.
[89] R. Mai, B. Luo, Y. Chen, and Z. He, “Double-sided cl compensation topology based component voltage stress optimisation method for capacitive power transfer charging system,”IET Power Electronics, vol. 11, no. 7, pp. 1153–1160, 2018.
[90] B. Ge, D. C. Ludois, and R. Perez, “The use of dielectric coatings in capacitive power transfer systems,” in2014 IEEE Energy Conversion Congress and Exposition (ECCE). IEEE, 2014, pp. 2193–2199.
[91] H. Fnato, Y. Chiku, and K. Harakawa, “Wireless power distribution with capacitive coupling excited by switched mode active negative capacitor,” in 2010 Inter- national Conference on Electrical Machines and Systems. IEEE, 2010, pp.
117–122.
[92] A. Sepahvand, A. Kumar, K. Afridi, and D. Maksimovi´c, “High power transfer density and high efficiency 100 mhz capacitive wireless power transfer system,”
in 2015 IEEE 16th workshop on control and modeling for power electronics (COMPEL). IEEE, 2015, pp. 1–4.
[93] C. Liu, A. P. Hu, and N.-K. Nair, “Modelling and analysis of a capacitively coupled contactless power transfer system,” IET power electronics, vol. 4, no. 7, pp.
808–815, 2011.
[94] T. M. Mostafa, D. Bui, A. Muharam, R. Hattori, and A. P. Hu, “Capacitive power transfer system with reduced voltage stress and sensitivity,”Applied Sciences, vol. 8, no. 7, p. 1131, 2018.
[95] T. M. Mostafa, A. Muharam, and R. Hattori, “Wireless battery charging system for drones via capacitive power transfer,” in 2017 IEEE PELS Workshop on Emerging Technologies: Wireless Power Transfer (WoW). IEEE, 2017, pp. 1–6.
[96] Y. Su, Q. Fu, J. Ma, X. Qing, and C. Tang, “Fringing electric field suppression method of electric-field coupled power transfer system with a new four-plate coupler,”Autom Electr Power Syst, vol. 43, no. 2, pp. 130–141, 2019.
[97] T. Duerbaum, “First harmonic approximation including design constraints,” in INTELEC-Twentieth International Telecommunications Energy Conference (Cat.
No. 98CH36263). IEEE), 1998, pp. 321–328.
[98] V.-B. Vu, M. Dahidah, V. Pickert, and V.-T. Phan, “An improved lcl-l compensation topology for capacitive power transfer in electric vehicle charging,”IEEE Access, vol. 8, pp. 27 757–27 768, 2020.
[99] W. Zhou, Y.-G. Su, L. Huang, X.-D. Qing, and A. P. Hu, “Wireless power transfer across a metal barrier by combined capacitive and inductive coupling,”IEEE Transactions on Industrial Electronics, vol. 66, no. 5, pp. 4031–4041, 2018.
[100] Z. Zhang, H. Pang, A. Georgiadis, and C. Cecati, “Wireless power transfer‚Äîan overview,”IEEE Transactions on Industrial Electronics, vol. 66, no. 2, pp. 1044–
1058, 2018.
[101] H. Ueda and H. Koizumi, “Class-e 2 dc-dc converter with basic class-e inverter and class-e zcs rectifier for capacitive power transfer,”IEEE Transactions on Circuits and Systems II: Express Briefs, vol. 67, no. 5, pp. 941–945, 2020.
[102] J. Dai and D. C. Ludois, “A survey of wireless power transfer and a critical com- parison of inductive and capacitive coupling for small gap applications,”IEEE Transactions on Power Electronics, vol. 30, no. 11, pp. 6017–6029, 2015.
[103] “Ieee standard for safety levels with respect to human exposure to radio frequency electromagnetic fields, 3 khz to 300 ghz,” IEEE Std C95.1-2005 (Revision of IEEE Std C95.1-1991), pp. 1–238, 2006.
[104] (accessed 20 March, 2020) Processing. [Online]. Available: https://processing.org/
[105] C. Liu, A. P. Hu, G. A. Covic, and N.-K. C. Nair, “Comparative study of ccpt systems with two different inductor tuning positions,” IEEE Transactions on power electronics, vol. 27, no. 1, pp. 294–306, 2011.
[106] X. Wu, Y. Su, L. Chen, S. Xie, and Y. Zhao, “An ecpt system with complementary symmetric lcc resonant network,” in2017 IEEE PELS Workshop on Emerging Technologies: Wireless Power Transfer (WoW). IEEE, 2017, pp. 1–6.
[107] H. Nishiyama and M. Nakamura, “Form and capacitance of parallel-plate ca- pacitors,”IEEE Transactions on Components, Packaging, and Manufacturing Technology: Part A, vol. 17, no. 3, pp. 477–484, 1994.
[108] G. A. S. Rate and T. a Cue, “13] holland, jh (1975). adaptation in natural and artificial systems. ann arbor: University of michigan press. 14] holland, jh (1992). adaptation in natural and artificial systems. cambridge. ma: Mit press.”
[109] R. Eberhart and J. Kennedy, “A new optimizer using particle swarm theory,” in MHS’95. Proceedings of the Sixth International Symposium on Micro Machine and Human Science. Ieee, 1995, pp. 39–43.
[110] S. Saremi, S. Mirjalili, and A. Lewis, “Grasshopper optimisation algorithm: theory and application,”Advances in Engineering Software, vol. 105, pp. 30–47, 2017.
[111] M. Dorigo, M. Birattari, and T. Stutzle, “Ant colony optimization,”IEEE computa- tional intelligence magazine, vol. 1, no. 4, pp. 28–39, 2006.
[112] D. Karaboga, “Artificial bee colony algorithm,”scholarpedia, vol. 5, no. 3, p. 6915, 2010.
[113] M. A. Hossain, S. M. Abdullah, A. Ahmed, Q. N. U. Islam, and S. Tito, “Optimal gen- eration mix of hybrid renewable energy system employing hybrid optimization algorithm,” inInternational Conference on Intelligent Computing & Optimiza- tion. Springer, 2020, pp. 681–692.