Conclusion - 3D Printing Technology for Visually Impaired ...

Blind or visually impaired individuals confront numerous obstacles while attempting to self- administer medications. For the visually challenged, the need for braille on dosage forms, manufacturing packaging and drug labeling prescriptions is growing significantly. SLS and FDM 3D printing technologies could be used to produce individualized dosage forms for blind or visually impaired individuals. These approaches may be used to create Braille- or Moon-patterned printlets that blind individuals could read, as well as Braille-encoded intraoral films. This novel concept is likely to revolutionize the way visually impaired patients are treated, increasing independence, medication adherence, and lowering medication errors. This could eventually result in the rethinking of the regulatory or standards framework for pharmaceutical Braille, given the recent rise of 3D printing technologies and their enormous potential for pharmaceutical manufacture and patient well-being.

References

Aho, J., Bøtker, J.P., Genina, N., Edinger, M., Arnfast, L., Rantanen, J., 2019. Roadmap to 3D-Printed Oral Pharmaceutical Dosage Forms: Feedstock Filament Properties and Characterization for Fused Deposition Modeling. J. Pharm. Sci. 108, 26–35.

https://doi.org/10.1016/j.xphs.2018.11.012

Akande, S.O., Dalgarno, K.W., Munguia, J., Pallari, J., Assessment of tests for use in process and quality control systems for selective laser sintering of polyamide powders. Journal of Materials Processing Technology 229, 2016, 549-561.

Alhnan, M.A., Okwuosa, T.C., Sadia, M., Wan, K.W., Ahmed, W., Arafat, B., Emergence of 3D Printed Dosage Forms: Opportunities and Challenges. Pharmaceutical research 33, 2016, 1817-1832.

Allahham, N., Fina, F., Marcuta, C., Kraschew, L., Mohr, W., Gaisford, S., Basit, A.W., Goyanes, A., Selective Laser Sintering 3D Printing of Orally Disintegrating Printlets Containing Ondansetron. Pharmaceutics 12, 2020, 110.

Almukainzi, M., Almuhareb, A., Aldwisan, F., & Alquaydhib, W. (2020, January 28).

Medication use patterns in the visually impaired in Saudi Arabia and the importance of applying Braille labeling. Saudi Pharmaceutical Journal. Retrieved January 9, 2022, from https://www.sciencedirect.com/science/article/pii/S1319016420300074

Annaji M, Ramesh S, Poudel I, Govindarajulu M, Arnold RD, Dhanasekaran M, et al.

Application of extrusion-based 3D printed dosage forms in the treatment of chronic diseases.

J Pharm Sci 2020;109:3551-68

Apoorva, R.; Vasundara, K.; Umadevi, R. A study on medication adherence, medication related challenges faced and coping strategies adopted by visually impaired subjects in a tertiary care hospital. Int. J. Basic Amp Clin. Pharmacol. 2017

Aprecia Pharmaceuticals. (2018). Products. Aprecia The 3DP Pharmaceutical Company.

Retrieved January 2, 2022, from https://www.aprecia.com/products

Arafat B, Qinna N, Cieszynska M, Forbes RT, Alhnan MA. Tailored on demand anti- coagulant dosing: An in vitro and in vivo evaluation of 3D printed purpose-designed oral dosage forms. Eur J Pharm Biopharm 2018;128:282-9.

Awad, A., Fina, F., Goyanes, A., Gaisford, S., & Basit, A. W. (2020). 3D printing: Principles and pharmaceutical applications of selective laser sintering. International Journal of Pharmaceutics, 586, 119594. https://doi.org/10.1016/j.ijpharm.2020.119594

Awad, A., Fina, F., Trenfield, J.S., Patel, P., Goyanes, A., Gaisford, S., Basit, W.A., 3D Printed Pellets (Miniprintlets): A Novel, Multi-Drug, Controlled Release Platform Technology. Pharmaceutics 11, 2019.

Awad, A., Yao, A., Trenfield, S. J., Goyanes, A., Gaisford, S., & Basit, A. W. (2020, February 19). 3D printed tablets (printlets) with Braille and moon patterns for visually impaired patients. Pharmaceutics. Retrieved January 9, 2022, from https://www.ncbi.nlm.nih.gov/pmc/articles/PMC7076549/

Barakh Ali, S.F., Mohamed, E.M., Ozkan, T., Kuttolamadom, M.A., Khan, M.A., Asadi, A., Rahman, Z., Understanding the effects of formulation and process variables on the printlets quality manufactured by selective laser sintering 3D printing. Int J Pharm 570, 2019, 118651.

Beaman, J.J., Deckard, C.R., Selective laser sintering with assisted powder handling US 4938816 A. 1990.

Beck RCR, Chaves PS, Goyanes A, et al. 3D printed tablets loaded with polymeric nanocapsules: An innovative approach to produce customized drug delivery systems. Int J Pharm 2017; 528(1-2): 268-79.

Blindness and vision impairment. (n.d.). Retrieved October 22, 2021, from https://www.who.int/news-room/fact-sheets/detail/blindness-and-visual-impairment

BRAILLE UNDER COPYRIGHT LAW - Talwar Advocates. (n.d.). Retrieved October 23, 2021, from https://talwaradvocates.com/braille-copyright-law/

Chua, C.K., Leong, K.F., Tan, K.H., Wiria, F.E., Cheah, C.M., Development of tissue scaffolds using selective laser sintering of polyvinyl alcohol/hydroxyapatite biocomposite for craniofacial and joint defects. Journal of Materials Science: Materials in Medicine 15, 2004, 1113-1121.

Cui, M., Pan, H., Su, Y., Fang, D., Qiao, S., Ding, P., & Pan, W. (2021, March 12).

Opportunities and challenges of three-dimensional printing technology in pharmaceutical formulation development. Acta Pharmaceutica Sinica B. Retrieved November 11, 2021, from https://www.sciencedirect.com/science/article/pii/S2211383521000873.

Di Giacomo, G.d.A., Cury, P.R., da Silva, A.M., da Silva, J.V., Ajzen, S.A., A selective laser sintering prototype guide used to fabricate immediate interim fixed complete arch prostheses in flapless dental implant surgery: Technique description and clinical results. The Journal of prosthetic dentistry 116, 2016, 874-879.

Dotchev, K., Yusoff, W., Recycling of polyamide 12 based powders in the laser sintering process. Rapid Prototyping Journal, 2009.

Ehtezazi T, Algellay M, Islam Y, Roberts M, Dempster NM, Sarker SD. The Application of 3D Printing in the Formulation of Multilayered Fast Dissolving Oral Films. J Pharm Sci 2018; 107(4): 1076-85.

Eleftheriadis, G. K., & Fatouros, D. G. (2021). Haptic Evaluation of 3D-printed Braille- encoded Intraoral Films. European Journal of Pharmaceutical Sciences, 157, 105605.

31 https://doi.org/10.1016/j.ejps.2020.105605

Eleftheriadis, G.K., Monou, P.K., Bouropoulos, N., Boetker, J., Rantanen, J., Jacobsen, J., Vizirianakis, I.S., Fatouros, D.G., 2020d. Fabrication of mucoadhesive buccal films for local administration of ketoprofen and lidocaine hydrochloride by combining fused deposition modeling and inkjet printing. J. Pharm. Sci. 109, 2757–2766.

https://doi.org/10.1016/j.xphs.2020.05.022

Eosoly, S., Brabazon, D., Lohfeld, S., Looney, L., Selective laser sintering of hydroxyapatite/poly-εcaprolactone scaffolds. Acta Biomaterialia 6, 2010, 2511-2517.

Fina F, Goyanes A, Madla CM, Award A, Trenfield SJ, Kuek JM, et al. 3D printing of drug- loaded gyroid lattices using selective laser sintering. Int J Pharm 2018;547:44-52.

Fina, F., Goyanes, A., Gaisford, S., Basit, A.W., Selective laser sintering (SLS) 3D printing of medicines. Int J Pharm 529, 2017, 285-293

Fu J, Yin H, Yu X, et al. Combination of 3D printing technologies and compressed tablets for preparation of riboflavin floating tabletin-device (TiD) systems. Int J Pharm 2018; 549(1-2):

370-9.

Gayer, C.; Ritter, J.; Bullemer, M.; Grom, S.; Jauer, L.; Meiners, W.; Pfister, A.; Reinauer, F.; Vuˇcak, M.; Wissenbach, K.; et al. Development of a solvent-free polylactide/calcium carbonate composite for selective laser sintering of bone tissue engineering scaffolds. Mater.

Sci. Eng. C 2019, 101, 660–673.

George, M., Aroom, K.R., Hawes, H.G., Gill, B.S., Love, J., 3D printed surgical instruments:

the design and fabrication process. World journal of surgery 41, 2017, 314-319.

Gioumouxouzis CI, Baklavaridis A, Katsamenis OL, et al. A 3D printed bilayer oral solid dosage form combining metformin for prolonged and glimepiride for immediate drug delivery. Eur J Pharm Sci 2018; 120(120): 40-52.

Goyanes A, Robles Martinez P, Buanz A, Basit AW, Gaisford S. Effect of geometry on drug release from 3D printed tablets. Int J Pharm 2015; 494(2): 657-63.

Holländer J, Genina N, Jukarainen H, et al. Three-Dimensional Printed PCL-Based Implantable Prototypes of Medical Devices for Controlled Drug Delivery. J Pharm Sci 2016;

105(9): 2665-76.

Introduction to Pharmaceutical Braille – PharmaBraille. (n.d.). Retrieved December 25, 2021, from https://www.pharmabraille.com/pharmaceutical-braille/introduction-to-pharmaceutical- braille/

Invention of braille - RNIB - See differently. (n.d.). Retrieved October 22, 2021, from https://www.rnib.org.uk/braille-and-other-tactile-codes-portal-braille-past-present-and-

future/invention-braille

ISO 17351, Packaging – Braille on packaging for medicinal products, 2014

Jamróz, W., Szafraniec, J., Kurek, M., & Jachowicz, R. (2018). 3D Printing in Pharmaceutical and Medical Applications – Recent Achievements and Challenges.

Pharmaceutical Research, 35(9). https://doi.org/10.1007/S11095-018-2454-X

Kentab, B. Y., Al-Rowiali, K. Z., Al-Harbi, R. A., Al-Shammari, N. H., Balhareth, W. M., &

Al-Yazeed, H. F. (2015). Exploring medication use by blind patients in Saudi Arabia. Saudi Pharmaceutical Journal, 23(1), 102–106. https://doi.org/10.1016/J.JSPS.2014.05.002

Khamkar, P., & Mahapatra, D. K. (2021, October 21). Fused deposition modelling: 3D printing technique on the verge to create booming growth in pharmaceuticals. American

Pharmaceutical Review. Retrieved January 6, 2022, from

http://www.americanpharmaceuticalreview.com/Featured-Articles/580329-Fused-Deposition- Modelling-3D-Printing-Technique-on-the-Verge-to-Create-Booming-Growth-in-

Pharmaceuticals/

Khan, F. A., Narasimhan, K., Swathi, C. S. V., Mustak, S., Mustafa, G., Ahmad, M. Z., &

Akhter, S. (2019). 3D Printing Technology in Customized Drug Delivery System: Current State of the Art, Prospective and the Challenges. Current Pharmaceutical Design, 24(42), 5049–5061. https://doi.org/10.2174/1381612825666190110153742

Kollamaram, G., Croker, D. M., Walker, G. M., Goyanes, A., Basit, A. W., & Gaisford, S.

(2018, April 26). Low temperature fused deposition modeling (FDM) 3D printing of Thermolabile Drugs. International Journal of Pharmaceutics. Retrieved January 6, 2022,from https://www.sciencedirect.com/science/article/abs/pii/S0378517318302825

Kruth, J.-P., Mercelis, P., Van Vaerenbergh, J., Froyen, L., Rombouts, M., 2003. Advances in selective laser sintering, Proceedings of the 1st International Conference on Advanced Research in Virtual and Rapid Prototyping, pp. 59-70.

Lee, B.H., Lee, Y.J., 2018. Evaluation of medication use and pharmacy services for visually impaired persons: perspectives from both visually impaired and community pharmacists.

Disab. Health J. https://doi.org/10.1016/j. dhjo.2018.07.012.

Leong, K.F., Chua, C.K., Gui, W.S., Verani, Building Porous Biopolymeric Microstructures for Controlled Drug Delivery Devices Using Selective Laser Sintering. The International Journal of Advanced Manufacturing Technology 31, 2006, 483-489

Loconsole, C., Leonardis, D., Bergamasco, M., & Frisoli , A. (2016, July). An experimental study on fused-deposition ... - springer. Retrieved January 6, 2022, from https://link.springer.com/chapter/10.1007%2F978-3-319-41962-6_18

Long J, Nand AV, Ray S, et al. Development of customised 3D printed biodegradable projectile for administrating extendedrelease contraceptive to wildlife. Int J Pharm 2018;

548(1): 349-56

Ma, F., Zhang, H., Hon, K.K.B., Gong, Q., An optimization approach of selective laser sintering considering energy consumption and material cost. Journal of Cleaner Production 199, 2018, 529- 537

Melocchi, A., Uboldi, M., Maroni, A., Foppoli, A., Palugan, L., Zema, L., Gazzaniga, A., 2020. 3D printing by fused deposition modeling of single- and multi-compartment hollow systems for oral delivery – A review. Int. J. Pharm. 579, 119155.

https://doi.org/10.1016/j.ijpharm.2020.119155

Pal, B., & Rajpoot, C. (2021, July 5). FDM Printing Advantages & disadvantages: Detailed.

TheMechNinja. Retrieved January 7, 2022, from https://themechninja.com/07/fdm-printing- advantages-disadvantages-detailed/

Palo M, Holländer J, Suominen J, Yliruusi J, Sandler N. 3D printed drug delivery devices:

perspectives and technical challenges. Expert Rev Med Devices 2017; 14(9): 685-96

Partee, B., Hollister, S.J., Das, S., Selective Laser Sintering Process Optimization for Layered Manufacturing of CAPA[sup ®] 6501 Polycaprolactone Bone Tissue Engineering Scaffolds.

Journal of Manufacturing Science and Engineering 128, 2006, 531.

Revilla-León, M., Özcan, M., Additive Manufacturing Technologies Used for 3D Metal Printing in Dentistry. Current Oral Health Reports 4, 2017, 201-208.

Sadia M, Arafat B, Ahmed W, Forbes RT, Alhnan MA. Channelled tablets: An innovative approach to accelerating drug release from 3D printed tablets. J Control Release 2018; 269:

355-63.

Salmoria, G., Klauss, P., Kanis, L., Laser Printing of PCL/Progesterone Tablets for Drug Delivery Applications in Hormone Cancer Therapy. Lasers in Manufacturing and Materials Processing 4, 2017a, 108-120.

Salmoria, G., Vieira, F., Ghizoni, G., Gindri, I., Kanis, L., Additive Manufacturing of PE/Fluorouracil Waffles for Implantable Drug Delivery in Bone Cancer Treatment.

International Journal of Engineering Research and Science 3, 2017b, 62-70.

Salmoria, G., Vieira, F., Ghizoni, G., Marques, M., Kanis, L., 3D printing of PCL/Fluorouracil tablets by selective laser sintering: Properties of implantable drug delivery for cartilage cancer treatment. drugs 2, 2017c, 1-7.

Salmoria, G., Vieira, F., Muenz, E., Gindri, I., Marques, M., Kanis, L., Additive Manufacturing of PE/fluorouracil/progesterone intrauterine device for endometrial and ovarian cancer treatments. Polymer Testing 71, 2018, 312-317

Salmoria, G.V., Cardenuto, M.R., Roesler, C.R.M., Zepon, K.M., Kanis, L.A., PCL/Ibuprofen Implants Fabricated by Selective Laser Sintering for Orbital Repair. Procedia CIRP 49, 2016, 188- 192.

Salmoria, G.V., Klauss, P., Zepon, K., Kanis, L.A., Roesler, C.R.M., Vieira, L.F., Development of functionally-graded reservoir of PCL/PG by selective laser sintering for drug delivery devices. Virtual and Physical Prototyping 7, 2012c, 107-115.

Shahrubudin, N., Lee, T. C., & Ramlan, R. (2019). An Overview on 3D Printing Technology:

Technological, Materials, and Applications. Procedia Manufacturing, 35, 1286–1296.

https://doi.org/10.1016/J.PROMFG.2019.06.089

Shellabear, M., Nyrhilä, O., DMLS-Development history and state of the art. Laser Assisted Netshape engineering 4, proceedings of the 4th LANE, 2004, 21-24.

Smith D, Kapoor Y, Hermans A, et al. 3D printed capsules for quantitative regional absorption studies in the GI tract. Int J Pharm 2018; 550(1-2): 418-28.

Smith, M.; Bailey, T. Identifying Solutions to Medication Adherence in the Visually Impaired Elderly. Consult. Pharm. 2014, 29, 131–134.

Solanki NG, Tahsin M, Shah AV, Serajuddin ATM. Formulation of 3D Printed Tablet for Rapid Drug Release by Fused Deposition Modeling: Screening Polymers for Drug Release, Drug-Polymer Miscibility and Printability. J Pharm Sci 2018; 107(1): 390-401.

Tagami T, Nagata N, Hayashi N, et al. Defined drug release from 3D-printed composite tablets consisting of drug-loaded polyvinylalcohol and a water-soluble or water-insoluble polymer filler. Int J Pharm 2018; 543(1-2): 361-7.

Tan, K.H., Chua, C.K., Leong, K.F., Cheah, C.M., Cheang, P., Abu Bakar, M.S., Cha, S.W., Scaffold development using selective laser sintering of polyetheretherketone–hydroxyapatite biocomposite blends. Biomaterials 24, 2003, 3115-3123.

Tan, K.H., Chua, C.K., Leong, K.F., Cheah, C.M., Gui, W.S., Tan, W.S., Wiria, F.E., Selective laser sintering of biocompatible polymers for applications in tissue engineering.

Bio-medical materials and engineering 15, 2005a, 113-124.

Telenko, C., Seepersad, C.C., 2010. Assessing energy requirements and material flows of selective laser sintering of Nylon parts, Proceedings of the Solid Freeform Fabrication Symposium, pp. 8- 10.08

Thomas, D.S., Gilbert, S.W., Costs and cost effectiveness of additive manufacturing. NIST special publication 1176, 2014, 12.

Tiwari, S.K., Pande, S., Agrawal, S., Bobade, S.M., Selection of selective laser sintering materials for different applications. Rapid Prototyping Journal, 2015.

UKAAF. (2020, July 31). . UK Association for Accessible formats. Retrieved January 5, 2022, from https://www.ukaaf.org/standards/

Vail, N.K., Balasubramanian, B., Barlow, J.W., Marcus, H.L., A thermal model of polymer degradation during selective laser sintering of polymer coated ceramic powders. Rapid prototyping journal, 1996.

Ventola CL. Medical Applications for 3D Printing: Current and Projected Uses. P&T 2014;

39(10): 704-11.

Vujčić, Đ., Kašiković, N., Stančić, M., Majnarić, I., & Novaković, D. (2021). UV ink-jet printed braille: a review on the state of the art. Pigment and Resin Technology, 50(2), 93–

103. https://doi.org/10.1108/PRT-03-2020-0022

Walker, J., Santoro, M., 2017. Processing and production of bioresorbable polymer scaffolds for tissue engineering, Bioresorbable Polymers for Biomedical Applications. Elsevier, pp.

181-203.

Wang C-C, Tejwani MR, Roach WJ, et al. Development of Near Zero-Order Release Dosage Forms Using Three-Dimensional Printing (3-DPTM) Technology Zero-Order Release Dosage Forms Using 3-DPTM. Drug Dev Ind Pharm 2006; 32(3): 367-76.

Weisman JA, Ballard DH, Jammalamadaka U, et al. 3D Printed Antibiotic and Chemotherapeutic Eluting Catheters for Potential Use in Interventional Radiology: In Vitro Proof of Concept Study. Acad Radiol 2018; 1-5.

What Is Braille? | American Foundation for the Blind. (n.d.). Retrieved October 22, 2021, from https://www.afb.org/blindness-and-low-vision/braille/what-braille

Williams, J., Revington, P., Novel use of an aerospace selective laser sintering machine for rapid prototyping of an orbital blowout fracture. International journal of oral and maxillofacial surgery 39, 2010, 182-184.

World Braille Day - United Rehabilitation Services of Greater Dayton. (n.d.). Retrieved October 23, 2021, from https://ursdayton.org/braille-facts/

World Health Organization. (n.d.). Vision Impairment and blindness. World Health Organization. Retrieved January 9, 2022, from https://www.who.int/news-room/fact- sheets/detail/blindness-and-visual-impairment

Zeeshan F, Madheswaran T, Pandey M, Gorain B. Three-dimensional (3-D) printing technology exploited for the fabrication of drug delivery systems. Curr Pharm Design 2018;24:5019-28.

Dalam dokumen 3D Printing Technology for Visually Impaired ... - BracU IR (Halaman 39-50)