The Effect of tempering temperatures on a fatigue of AISI 4130.
Bebas
24
0
0
Teks penuh
Gambar
Dokumen terkait
TAJUK: The Effect of Cutting Parameter to the Hole Diameter Accuracy of AISI D2 Tool Steel in Drilling Process.. SESI PENGAJIAN: 2015/16
surface finish when hard turning AISI D2 tool steel of 45 HRC with carbide cutting tool. Besides that, the influence of size effect on surface morphology is also
heat treatment on microstructure and its effect on hardness, tensile. strength, and fatigue strength of low
Research on fatigue life has been carried out on 2 types of specimens, namely brass C3604BD type and AA1101 type with an analysis of the difference in profile radius of
Graph of Mean Value of Impact Test From the results of the impact test, the highest average toughness value toughest and most ductile was the specimen with a tempering treatment of
Volume 17 Number 2 Article 7 8-2-2013 Fatigue Life Prediction of the Keel Structure of a Tsunami Buoy Fatigue Life Prediction of the Keel Structure of a Tsunami Buoy Using Spectral
The finite element analysis FEA was used for the prediction of fatigue life and point for fatigue failure in the aluminium alloy AA6061 specimen.. The stress-life curves at different
Kumar and Shahi [3] studied the impact of varying heat input on the mechanical and metallurgical properties of TIG welded AISI 304 stainless steel joints and concluded that as welding
