The Influence Of Cu-Reinforced Aluminium Metal Matrix Composite To The Mechanical Properties, Corrosion Resistance And Microstructure.
Bebas
24
0
0
Teks penuh
Dokumen terkait
Cu addition does not have a significant effect on refining the size of the α (Al) globules. 3) In parallel to the increase in the Cu content, the hardness and tensile strength
Komposit adalah perpaduan dalam skala makroskopis dari dua atau lebih material yang memiliki fasa berbeda, dipilih berdasarkan kombinasi fisik masing-masing material penyusun
Pada Gambar 1 dapat dilihat bahwa secara umum struktur mikro yang terbentuk dari perlakuan panas yang diberikan mengand- ung martensit yang berbentuk bilah (lath
The compressive strength, microhardness, the coefficient of friction and wear rate of the composites are noticeably improved, compared to the matrix alloy of AZ31.. GNP content is the
The presence of hard ZrB2 particles, processing of composite through in-situ method and grain refinement may be the attribute for improvement in tensile strength of composites [25]..
The hardness, tensile strength, flexural strength and compression strength of the aluminium hybrid metal matrix composites are found to be increased by increasing the weight
PROCESSING AND CHARACTERISATION OF PARTICULATE REINFORCED
ALUMINIUM -11.8 % SILICON MATRIX COMPOSITE
PROCEEDING OF ADIC 2010 ACEH DEVELOPMENT INTERNATIONAL CONFERENCE 2010 26 – 28 March 2010 Auditorium Hall, Faculty of Engineering, Universiti Putra Malaysia Jointly Organised by
450 | P a g e DEVELOPMENT AND EVALUATION OF MECHANICAL PROPERTIES OF HYBRID ALUMINIUM METAL MATRIX COMPOSITES Rajesh Kivade1, Mahendra K V2 1IEM, Dr Ambedkar Institute of
