Numerical Simulation Of Two - Dimensional Transient Heat Conduction Using Finite Element Method.
Bebas
24
0
0
Teks penuh
Dokumen terkait
The analysis was conducted using the available commercial finite element packages MSC.Nastran - Patran and MSC Marc using Solution 600 (implicit nonlinear).. A 2-D axisymmetric
"Chapter 7 A 3D- Coupled Field-Circuit Model for Analyzing the Internal Short-Circuit Faults of Power Transformer", Springer Science and Business Media LLC,
Numerical simulations and analysis for the system 3.1,3.2 and 3.3 were investigated extensively in the last several decades, applied mixed finite element method of the pressure and the
2021, 243 58-67 https://ph02.tci-thaijo.org/index.php/tsujournal/article/view/243606 Numerical Simulation of Granular Mixing in Conical Mixer with Different Angles Using Discrete
Therefore, a correlation between the stress and the junction temperature of the LED chip exist as demonstrated by the evaluated results Conclusion: Simulation was carried out to
Obtained FEA results show the effect of the clamping pressure, internal pressure, axial end load, temperature effect, gasket elasticity modulus on the contact pressure between the
A MOLECULAR DYNAMICS SIMULATION OF HEAT CONDUCTION OF A FINITE LENGTH SINGLE-WALLED CARBON NANOTUBE Shigeo Maruyama1 Department of Mechanical Engineering, The University of Tokyo,
