Proceedings of Abstracts and Papers of An Appropriate Lot Sizing Technique for Decreasing Demand.

(1)

Proceedings of Abstracts and Papers of

The 16

th

Asia Pacific Industrial Engineering

And Management Systems Conference (APIEMS 2015)

December 8

th

–

11

th

, 2015

Ho Chi Minh City, Vietnam

Edited by

Ho Thanh Phong

Pham Huynh Tram

Vo Quynh Mai

Phan Nguyen Ky Phuc

Le Nhat Ho

Le Phuoc Thien Thanh

Huynh Khanh Dang

Dao Anh Kim Ngan

Ha Thi Xuan Chi

(2)

PROCEEDINGS OF ABSTRACTS AND PAPERS OF THE 16th

ASIA PACIFIC INDUSTRIAL ENGINEERING &

MANAGEMENT SYSTEMS CONFERENCE (APIEMS 2015)

AUTHORS

.

English version ©, VNU-HCMC INTERNATIONAL UNIVERSITY, VNU-HCMC PRESS and AUTHORS.

(3)

PROCEEDINGS OF

ABSTRACTS & PAPERS OF

THE 16

TH

ASIA PACIFIC

INDUSTRIAL ENGINEERING

AND MANAGEMENT SYSTEMS

CONFERENCE (APIEMS 2015)

AUTHORS

VNU-HCMC PRESS

Quarter 6, Linh Trung Ward, Thu Duc District, Ho Chi Minh City

Block C, 10-12 Dinh Tien Hoang Street, Ben Nghe Ward, District 1, Ho Chi Minh City Tel: 86 272 6361 – 86 272 6390

E-mail: vnuhp@vnuhcm.edu.vn

DISTRIBUTION OFFICE

Block C, 10-12 Dinh Tien Hoang Street, Ben Nghe Ward, District 1, Ho Chi Minh City Tel: 86 272 6361 – 86 272 6390

Website: www.nxbdhqghcm.edu.vn

Responsible for publishing: NGUYEN HOANG DUNG

Responsible for content: NGUYEN HOANG DUNG

Responsible for manuscript and authorship: VNU-HCMC INTERNATIONAL UNIVERSITY

Responsible for editing: PHAN THỊ THANH THANH BUI TRAN CA DAO VU THI HANH TRANG

Responsible for printing preparation: THANH THANH

AN NHIEN CA DAO

Cover design:

VNU-HCMC INTERNATIONAL UNIVERSITY

First published in 2015

Quantity: 400 copies,

Size 20 x 28 cm, Publishing Registration No.:

3677-2015/CIBIPH/ 01-425/DHQGTPHCM, Publishing Decision No.: 224/QD issued on November 302d 2015 by VNU-HCM Publishing House

Printed at Hung Phu Printing and Packaging Company Limited. Address: 162A/1 – Quarter 1A – An Phu Ward – Thuan An Town – Binh Duong Province

Archival copy submitted: Quarter IV/2015

ISSN: 2350

–

742X

(4)

MESSAGE FROM THE GENERAL CHAIR

International University (IU), one of six member universities of

Vietnam National University-HCMC was established on

December 2003. The University is the first public international

university in Vietnam that entirely uses English in all activities.

IU-HCMC is considered a leading university in Vietnam

National University system that excels in operations, teaching,

and research aspects. This year, our university took great honor

to hold the 16

th

Asia Pacific Industrial Engineering and

Management Systems in Ho Chi Minh City, the largest city of

Vietnam.

As an organizer of the APIEMS 2015, we are impressed with the number and quality of papers

that we have received for the conference. On behalf of the APIEMS 2015 organizing committee,

I would like to thank Prof. Hoang Pham and Prof. Chen-Fu Chien for their excellent keynote

speeches, I would also like to express my gratitude to more than 300 participants and

distinguished speakers for their enthusiastic supports. As the conference was first time held in

Vietnam, we are very grateful for the help of the Honorary Chairs, Program Committee

Co-Chairs, Reviewers, who have given us valuable counseling and assist in reviewing a huge

number of abstracts and manuscripts. My sincere thanks to all faculties, staff and student

volunteers of Industrial and Systems Engineering Department, staff of the Office of Research

and Development Office, External and Public Relations, Facility Development in International

University for their hard work to hold this event successfully. Thanks also to all of our sponsors

who have generously support us for the Conference.

Finally, I would like to say a very warm welcome to all distinguished guests, speakers and

participants of the APIEMS 2015. I wish you enjoy the conference, have many good

presentations, fruitful discussions and meet new friends.

Dr. Ho Thanh Phong

Rector of International University

Head of Department of Industrial & Systems Engineering

(5)

MESSAGE FROM THE APIEMS PRESIDENT

On behalf of the Asia Pacific Industrial Engineering and

Management Society, I would like to welcome the participants to

this year APIEMS Conference. Started in 1998, APIEMS has

grown to become the premier conference for industrial

engineering and management systems in the Asia Pacific region

with participants from all over the world.

I congratulate and thank to Dr. Ho Thanh Phong, Rector of

International University, the Conference Chair and his colleagues

who have made this conference a successful one. This is the first

time the APIEMS held in Vietnam and hope we can come back

again! We also welcome IEM professions join APIEMS activities and share their research

results and applications.

Wish you had an enjoyable stay and have fruitful discussions at the conference!

Bernard C.Jiang, Ph.D, P.E.

(6)

KEYNOTE SPEECHES

Keynote Speech I

Research Challenges and Opportunities in Reliability Computing

Hoang Pham

Distinguished Professor

Department of Industrial and Systems Engineering

Rutgers University, State University of New Jersey, NJ - USA

Abstract

Reliability computing, which consists of modeling and prediction, has become of great interest in recent years due to spacious arrays of complex systems and applications in our everyday safety, serviceability, security and economic welfare. Modeling is hard but predicting is much harder due to the uncertainties of the system's operating environments and human will when it come to the know-how to use the analysis of complex data and modeling results in order to make effective decisions.

This talk discusses some research challenges and opportunities in reliability computing that focus on the modeling of complex systems, both hardware and software, subject to the uncertainties of operating environments. Reliability computing results and model selections based on various criteria are also discussed.

Brief Bio

Dr. Hoang Pham is a Distinguished Professor and former Chairman (2007-2013) of the Department of

Industrial and Systems Engineering at Rutgers University. Before joining Rutgers, he was a Senior Engineering Specialist with the Boeing Company and the Idaho National Engineering Laboratory. He has served as Editor-in-Chief, Editor, Associate Editor, Guest Editor, and board member of many journals. He is the Editor of Springer Book Series in Reliability Engineering, the Editor of World Scientific Book Series on Industrial and Systems Engineering, and has served as Conference Chair and Program Chair of over 30 international conferences.

(7)

Keynote Speech II

Big Data Analyticsto Empower Manufacturing Intelligence and Smart

Production for Industry 3.5

Chen-Fu Chien

Tsinghua Chair Professor

NTHU-TSMC Center for Manufacturing Excellence

Department of Industrial Engineering & Engineering Management

National Tsing Hua University, Taiwan

Abstract

The leading nations including Germany and USA have reemphasized the importance of manufacturing in the corresponding national competitive strategies such as Industry 4.0 and AMP. The paradigm of production and manufacturing system is shifting, in which the increasing adoption of the multimode sensors, intelligent equipment and robotics, Internet of Things (IOT), and big data analytics have empowered an unprecedented level of manufacturing intelligence. Indeed, various companies are battling for dominant positions in this newly created arena via providing novel value-proposition solutions and/or employing new technologies to enhance smart production.On the basis of our empirical studies with various industries, this talk aims to address emergent issues and propose a strategy called Industry 3.5 as a hybrid strategy between the best practice of existing manufacturing for Industry 3.0 and to-be Industry 4.0 with a number of illustrations of disruptive innovations via data mining and big data analytics. This talk will use some case studies to foster more discussions for future industrial engineering by addressing the revolutionary industry as a whole.

Brief Bio

Chen-Fu Chienis a Tsinghua Chair Professor in National Tsing Hua University, Taiwan. He is PI for the

(8)

SPECIAL TALK

Why is Uncertainty Theory Useful in Industrial Engineering?

Baoding Liu

Professor

Department of Mathematical Sciences

Tsinghua University, China

Abstract

When no samples are available to estimate aprobability distribution, we have to invite some domain experts toevaluate the belief degree that each event will occur. Perhaps some people think that the belief degree issubjective probability orfuzzy concept. However, it is usuallyinappropriate because both probability theory and fuzzy set theorymay lead to counterintuitive results in this case. In order torationally deal with belief degrees, anuncertainty theory was founded in 2007 and subsequently studiedby many researchers. Nowadays, uncertainty theoryhas become a branch of mathematics for modelling belief degrees.

This talk will introduce some fundamental concepts of uncertainty theory and discuss why uncertainty theory is useful in industrial engineering and management Science. This presentation is based on the

speaker’s book Uncertainty Theory published by Springer-Verlag, Berlin

Brief Bio

Baoding Liu received his B.S. degree in 1986 from Nankai University, and his M.S. degree in 1989 and

(9)

TUTORIAL TALK

Recent Advances in Hybrid Metaheuristics for Manufacturing Scheduling

Mitsuo Gen

Professor

Fuzzy Logic Systems Institute

Research Institute for Science and Technology

Tokyo University of Science, Japan

Abstract

Many combinatorial optimization problems (COP) in the real world manufacturing systems impose on more complex issues, such as complex structure, nonlinear constraints, and multiple objectives to be handled simultaneously and make the problem intractable to the traditional approaches because of NP-hard COP. In order to develop an efficient solution algorithm for finding a best solution with the reasonable computational time for NP-hard combinatorial problems, we have to consider the following very important issues:Quality of solution, Computational time, and Effectiveness of the nondominated solutions for multiobjective optimization problem (MOP).

Evolutionary algorithm (EA) is a subset of metaheuristics, a generic population-based metaheuristic such as genetic algorithm (GA), particle swarm optimization (PSO), and estimation of distribution algorithm (EDA). EA is based on principles from evolution theory, and it is very powerful and broadly applicable stochastic search and combinatorial optimization technique which is effective for solving various NP hard COP models.

This tutorial talk will be firstly introduced a brief survey of several metaheuristics based on EA such as GA, hybrid GA (HGA), multiobjective GA (MoGA), PSO and EDA for applying to various combinatorial optimization problems in real world manufacturing systems. Secondly real applications based on hybrid metaheuristics will be introduced the recent manufacturing scheduling topics such as semiconductor devices final testing scheduling, hard-disc drive devices (HDD) manufacturing scheduling, thin-film transistor-liquid crystal display (TFT-LCD) module assembly scheduling.

Brief Bio

(10)

CONFERENCE COMMITTEE



General Chair

 Ho Thanh Phong (Rector of IU-VNU, Vietnam)



Honorary Chairs

 Bernard Jiang (National Taiwan University of Science and Technology, Taiwan)

 Hoang Pham (Rutgers, the State University of New Jersey, USA)

 Kwok Leung Tsui (City University of Hong Kong, Hong Kong)

 Mario T. Tabucanon (United Nations University Institute for the Advanced Study of Sustainability (UNU-IAS), Japan)

 Moumen Darcherif (Rector of EPMI, France)

 Voratas Kachitvichyanukul (AIT, Thailand)

Program Committee Co-Chairs

 Anthony Shun Fung Chiu (De La Salle University, Philippines)

 Baoding Liu (Tsinghua University, China)

 Chen Youhua Frank (City University of Hong Kong, Hong Kong)

 Chi-Hyuck Jun (POSTECH, Korea)

 Du-Ming Tsai (Yuan Ze University, Taiwan)

 Erhan Kozan (Queensland University of Technology, Australia)

 Hirokazu Kono (Keio University, Japan)

 Huynh Trung Luong (AIT, Thailand)

 Kap Hwan Kim (Pusan National University, Korea)

 Katsuhiko Takahashi (Hiroshima University, Japan)

 Kazuyoshi Ishii (Kanazawa Institute of Technology, Japan)

 Kenichi Nakashima (Kanagawa University, Japan)

 Kin Keung Lai (City University of Hong Kong, Hong Kong)

 Kinnya Tamaki (Aoyama Gakuin University, Japan)

 Mohammad T. Khasawneh (Binghamton, the State University of New York, USA)

 Nagen Nagarur (Suny Binghamton University, USA)

 Samir Hamaci (EPMI, France)

 Shouyang Wang (Chinese Academy of Sciences, China)

 Tae Eog Lee (KAIST, South Korea)

 Takashi Irohara (Sophia University, Japan)

 Takashi Oyabu (Kokusai Business Gakuin College, Japan)

 Vincent F. Yu (National Taiwan University of Science and Technology, Taiwan)

 Yon-Chun Chou (National Taiwan University, Taiwan)

(11)

 Young Hoon Lee (Yonsei University, Korea)

 Zahari Taha (Universiti Malaysia Pahang, Malaysia)

Organizing Committee Co-Chairs

 Nguyen Van Chung (IU-VNU, Vietnam)

 Pham Huynh Tram (IU-VNU, Vietnam)

 Nguyen Hong Quang (IU-VNU, Vietnam)

 Nguyen Phuong Anh (IU-VNU, Vietnam)

(12)

CONFERENCE SCHEDULE

December 8

th

December 9

th

December 10

th

December 11

th

09:00 - 17:00

Registration

07:00 - 09:00 APIEMS Fellow Meeting

8:00 - 9:30 IFPR-APR meeting

08:20 - 10:00 Technical Sessions

09:00 - 09:30 Opening

Speech

09:30 - 10:30 Keynote

Speech 1 09:30 - 10:30

Keynote Speech 2

10:30 - 11:00 Coffee Break 10:30 - 11:00 Coffee Break 10:00 - 10:20 Coffee Break

11:00 - 12:00

Technical

Sessions _{11:00 - 12:00} Technical

Sessions 10:20 - 12:00

Technical Sessions

Special Talk

12:00 - 13:00 Lunch 12:00 - 13:00 Lunch 12:00 - 13:00 Lunch

Excursion

13:00 - 14:40

Technical

Sessions _{13:00 - 14:40} Technical Sessions

13:30 – 17 :30

IU + Saigon HTP Tours

(Optional) Tutorial Talk

14:40 - 15:00 Coffee Break 14:40 - 15:00 Coffee Break

15:00 - 17:00

Technical Sessions

15:00 - 17:00 Technical Sessions

APIEMS Board Meeting

18:00 - 20:30 Welcome

(13)

TECHNICAL SESSION SCHEDULE

Dec 9

th

Day 1

11:00 - 11:20 WM1-1 WM2-1 WM3-1 WM4-1 WM5-1 WM6-1 WM7-1 WM8-1 WM9-1

12:00 - 13:00

Lunch

13:00 - 13:20 WA1-1 WA2-1 WA3-1 WA4-1 WA5-1 WA6-1 WA7-1 WA8-1 WA9-1

14:40-15:00

Coffee Break

16:40 - 17:00 WA1-11 WA2-11 WA3-11 WA4-11 WA6-11 WA7-11 WA8-11 WA9-11

17:00 - 17:20 WA1-12 WA4-12 WA9-12

 W: Wednesday T: Thursday F: Friday

 M: Morning A: Afternoon

 1st number : Session number

 2ndnumber : Presentation order

(14)

Dec 10

th

Day 2

11:00 - 11:20 TM1-1 TM2-1 TM3-1 TM4-1 TM5-1 TM6-1 TM7-1 TM8-1 TM9-1

11:20 - 11:40 TM1-2 TM2-2 TM3-2 TM4-2 TM5-2 TM6-2 TM7-2 TM8-2 TM9-2

11:40 - 12:00 TM1-3 TM2-3 TM4-3 TM5-3 TM6-3 TM7-3 TM8-3 TM9-3

12:00 - 13:00

Lunch

13:00 - 13:20 TA1-1 TA2-1 TA3-1 TA4-1 TA5-1 TA6-1 TA7-1 TA8-1 TA9-1

14:40-15:00

Coffee Break

16:20 - 16:40 TA1-10 TA3-10 TA4-10 TA5-10 TA7-10 TA8-10 TA9-10

(15)

Dec 11

th

Day 3

08:20 - 08:40 FM1-1 FM2-1 FM3-1 FM4-1 FM5-1 FM6-1 FM7-1 FM8-1 FM9-1

10:00 - 10:20

Coffee Break

11:40 - 12:00 FM1-10 FM2-10 FM3-10 FM4-10 FM5-10 FM6-10 FM7-10 FM9-10

12:00-13:00

Lunch

(16)

CONFERENCE VENUE LAYOUT

CARRAVELLE HOTEL

2

nd

Floor

3

rd

Floor

OPENING & KEYNOTE SPEECH

(17)

(18)

Detailed Program

TOPIC: COMPUTER AND AI

TOPIC: DATA MINING

TOPIC: DECISION MODELING

TOPIC: E-BUSINESS

TOPIC: ERGONOMIC

TOPIC: FINANCIAL - E-BUSINESS

TOPIC: HEALTH CARE

TOPIC: HEALTH CARE - ERGONOMIC

TOPIC: HUMAN COMPUTER INTERACTION - IMAGE PROCESSING

TOPIC: LOGISTICS

TOPIC: MANAGEMENT

TOPIC: MCDM

TOPIC: METAHEURISTIC

TOPIC: OPERATIONS RESEARCH 1

TOPIC: OPERATIONS RESEARCH 2

TOPIC: OPTIMIZATION

TOPIC: OPTIMIZATION TECHNIQUES - METAHEURISTIC

TOPIC: PRODUCT DESIGN AND DEVELOPMENT

TOPIC: PRODUCT PLANNING AND MARKETING

TOPIC: PRODUCTION AND OPERATIONS MANAGEMENT

TOPIC: PRODUCTION DESIGN AND DEVELOPMENT

TOPIC: QUALITY MANAGEMENT

TOPIC: RELIABILITY - PROBABILITY MODEL

TOPIC: SCHEDULING AND SEQUENCING

TOPIC: SERVICE MANAGEMENT

TOPIC: SIMULATION

TOPIC: SUPPLY CHAIN MANAGEMENT

TOPIC: SYSTEM MANAGEMENT

TOPIC: TOURISM MANAGEMENT

TOPIC: TOURIST - EDUCATION

(19)

TOPIC: COMPUTER AND AI

December 11th

FM3-1 (195)

Sequencing-Coordinate-Capacity Particle Swarm Optimization Algorithm for Solving the Open Vehicle Routing Problem with Time Windows

Chun-Hsiung Lai, Yu-Ren Wang†, Chen-Yang Cheng

1

FM3-3 (209)

Classification of EEG Analysis of Imagined Movement for EEG-Based Brain-Computer Interface

MikitoUmeda, SakikoOgoshi†, Yasuhiro Ogoshi, Yoshinori Mituhasi,

Tomohiro Takezawa

8

FM3-4 (255)

Observations of coastal fishery in Japan from the viewpoint of work conditions

Hideyuki Takahashi†

13

FM3-5 (279)

On computing Cycle Time in Weighted Event Graphs

KahouadjiHousseyn†, SariZaki, Hamaci Samir††, LabadiKarim

19

TOPIC: DATA MINING

December 10th

TM5-1 (39)

A Proposal For The Classification Method Of Documents Data With Unobserved Categories Considering Latent Topics

Yusei Yamamoto†, Kenta Mikawa, Masayuki Goto

26

TM5-2 (115)

A Finish Date Prediction of Job Hunting based on User

Clustering Approach considering Time Series Variation of Entry Tendencies

SeiyaNagamori†,Kenta Mikawa††, Masayuki Goto†††, TairikuOgihara††††

34

TM5-3 (123)

Logistic regression trees for categorical-numeric mixed type data classification

Su-Dong Lee and Chi-Hyuck Jun†

(20)

TA5-1 (124)

Markov Blanket Feature Selection in Mixed Data

Junghye Lee, JunyongJeong, Chi-Hyuck Jun†

48

TA5-2 (135)

Discretizing Continuous Data using Binary Particle Swarm Optimization to Improve Association Rules Mining from Medical Dataset

ChandrawatiPutriWulandari†, Ou-Yang, Chao††

52

TA5-3 (140)

Evaluating mobile cloud computing technology adoption issues: using hybrid MCDM models

Szu-Yuan Sun, Keng-Liang Huang†, Ming-Tsang Lu

59

TOPIC: DECISION MODELING

December 9th

WA6-10 (7)

Optimal Operation For Green Supply Chain Incorporating Inspection Policy Into Recycling Of Used Products

Shin Yamaguchi†, Etsuko Kusukawa

67

WA6-6 (204)

Applying intuitionistic fuzzy seasonality regression with genetic algorithms for Gasoline data

Kuo-Ping Lin†, and Yu-Ming Lu, Chien-Chih Lin, I-Hao Liao

75

WA6-8 (229)

A Study on Weather Effects on Energy Demand Forecasting

Geun-Cheol Lee, Jeong-Hee Han†

80

WA6-7 (259)

A Decision Making System for Cloud Computing Adoption Focused on Security Issues

Kiyoshi Nagata†, Tomoko Aoki, Yutaka Kigawa

86

WA6-11 (304)

Economic Analysis of LNG Fuelled Ships for the Container Ships

Kiyoul Lee, Joowon Lee, Guen-Sub Kim, Sangil Lee, Mooyoung

Jung†

94

WA6-9 (333)

Models for Solving Reconfigurable Planning Problem for Reconfigurable Manufacturing Systems

Kezia Amanda Kurniadi, Siku Kim, KwangyeolRyu†, Mooyoung Jung

(21)

TOPIC: E-BUSINESS

December 10th

TA3-9 (377)

Analyzing meaningful correlation between technological and financial performances of technology firms

Hoang-Minh Nguyen, Ba-Quang Vu, Hong-Quang Nguyen†, Vinh -Xuan Dao

110

TA3-7 (382)

EXPLORING THE FACTORS AFFECTING INTENTION TO BUY SMARTPHONES: A CASE STUDY ON OFFICE WORKERS IN HO CHI MINH CITY

Van BuiThanhThuy†, Hat NguyenDang

118

TA3-10 (271)

A Professional Training Program Design and Development for Global Product & Service Lifecycle Management: Action Project Group Activities through Industry-University Cooperation

Kin’ya Tamaki†, Young Won Park, Takeshi Abe

126

TA3-6

(335) Customers’ perception towards Corporate Social Responsibility and repurchase intention: A study of consumer Industry

Quy Vo Thi†, Phung Le Van

134

TA3-8 (398)

Analysis of Usability OPCS Software: A Test to The Student

RizkyJunianto, Laurence†, AgustinaChristiani, Helena J. Kristina

143

TOPIC: ERGONOMIC

December 9th - December 11th

WA5-6 (101)

Investigating of Human-Robot Collaboration Using a Mixed-Reality Tele-Sandblasting Maintenance System

RanonJientrakul†, SunpasitLimnararat, ChumpolYuangyai, WipooSrisuebsai, PholchaiChotiprayanakul††

148

WA5-7 (122)

The psychophysical evaluations of baby carriers

Te-Hung Chen, Ya-Yen Kao, Mao-Jiun J. Wang†

156

FM2-3 (113)

Study on Hand Dexterity Differences in Body Mass Index and Indicated Target Values on Control Capability of Hand-grip Strength

Kun-Hsi Liao†

(22)

FM2-4 (142)

The Accuracy of Distance Estimation in Virtual Reality and Augmented Reality Environment

Sui-Hua Ho†, Chiuhsiang Joe Lin††, RetnoWidyaningrum†††,

Bereket Haile Woldegiorgis, Sri GunaniPartiwi

168

WA5-9 (184)

Effect of Pronged Standing Type on Shank Circumference Increase

Yi-Lang Chen† and Che-Yu Chang

174

FM3-2

(163) Middle Taiwanese people’s Anthropometry in the Design of the Pillow.

Jhongpei Wu†, DengchuanCai

177

WA5-10 (185)

The Measurement of the Level of Sleepiness and Circadian Rhythm to Evaluate Work Schedule Patterns of UNPAR Security Guard

Daniel Siswanto†, Justin Hadinata

186

WM6-1 (187)

Walking on the spot effects before sleep on sleep quality

Ting Shao, DengchuanCai †

192

FM2-5 (282)

Preference investigation on pillow usability in Taiwan

Hsiao-Lin Chen†, DengchuanCai††

198

WM6-2 (190)

A study of the balance on young subjects from using wobble board-based exergaming system

Wei-Chieh Lin, Chien-Chih Wang†, Bernard C. Jiang

205

WM6-3 (251)

Visual analytics of game interaction data to support more effective elderly Kinect exergaming

Tien-Lung Sun† and Da-Ming Hung

208

FM2-2 (427)

Applying Data Mining for Manufacturing Cycle Time Estimation _– Case Study: Scancom Vietnam

Phong Ho Thanh, Anh Duong†, Yen Nguyen

(23)

TOPIC: FINANCIAL - E-BUSINESS

December 10th

TM3-1 (51)

Analysis Of Customer Purchase Behavior By Using Purchase History With Discount Coupon Based On Latent Class Model

Yuki Matsuzaki†, KanYamagami, Kenta Mikawa, Masayuki Goto

220

TM3-2 (58)

Estimating Forward Looking Distribution with the Ross Recovery Theorem

Takuya Kiriu†, Norio Hibiki††

228

TA3-1 (235)

Applying Expectation Confirmation and IS Success Model to Discuss B2C Consumers' Repurchase Intention

Ling-Lang Tang†, Che-Han Hsu††

236

TA3-3 (270)

Impacts of Electronic Logistics Service on Customer

Repurchase Intention in B2C Transactions: Comparisons among Product Types

Mai Vo Quynh†, Mai Vo Hong††

245

TA3-4 (287)

Cash Holdings Prediction using Random Forest Algorithm

Hsu-Che Wu†, Pei-Wen Wang, Jen-Hsiang Chen

253

TA3-5 (299)

STUDY OF FACTORS AFFECTING ONLINE SHOPPING INTENTION OF CUSTOMERS: CASE STUDY IN HO CHI MINH CITY, VIETNAM.

Ngan Nguyen Thi Thanh†, Uyen Hoang Phuong Phan, Phuong Van

Nguyen

258

TOPIC: HEALTH CARE

December 9th

WM5-1 (6)

A Study On The Ambulatory Care Center Booking System Of Hospitals

Chun Kit Lau, Yan Pui Lee, Yelin Fu, Kin Keung Lai † , John Wai

Keung Leung

266

WM5-2 (19)

Healthcare Quality Measurement And Service Innovation For Type 2 Diabetic Patients

Liang-ChiehChen, Ming-Chuan Chiu†, Pi-Lien Chiu

(24)

WM5-3 (118)

Operation Process Analysis and KAIZEN of Healthcare Activities on Nursing Homes in Japan

Masafumi Miyake†, Masato Takanokura and Masayuki Matsui,

Masaru Kawakami, Munenori Kakehi, Seiko Taki, Tetsuo Yamada, Keio Ishiguro

282

TOPIC: HEALTH CARE - ERGONOMIC

WA5-4 (88)

Human error analysis of accidents in the steel industry: Application of the Human Factors Analysis and Classification System

Yu-Ling Chen†, Kang-Hung Liu, and Chien-Chi Chang††

289

WA5-5

(96) Visualization of Skilled Worker’s Motion and its Effect on the Product Quality for Metallic Painting Operation

Takuya Hida†, Toshiyuki Matsumoto, Masaki Kubo, Ryosuke

Nakajima

294

WA5-1 (177)

Kullback Leibler Distance-Resampling with Adjusted Variance and Gradient Data-based Particle Filter Applied to Health Care Systems

Nga Ly-Tu†, Thuong Le-Tien, Linh Mai

301

FM5-6 (189)

SLEEP QUALITY INVESTIGATION OF TAIWANESE

Dengchuan Cai†, Hsiao-Lin Chen, Jia Lee

308

WA5-3 (210)

A Lean-Simulation Based Method to Reduce blood drawing cycle time in the hospitals

Chang, Ping-Yu† and Tseng, Yi-Ting

314

TOPIC: HUMAN COMPUTER INTERACTION - IMAGE

PROCESSING

December 10th

TM6-1 (41)

Moving Window In Hmd For Visual Field Impaired Students

Hiroyuki Kawabe†, Yuko Shimomura, Hidetaka Nambo, Shuichi Seto,

Hiroshi Arai

(25)

TM6-2 (42)

The Support System For The Night Blindness Student

Yuko Shimomura †, Hiroyuki Kawabe, Hidetaka Nambo, Shuichi

Seto, Hiroshi Arai

322

TM6-3 (44)

Support System To Active Learning For Hearing Impaired Student

Shuichi Seto†, Yuko Shimomura, Hiroyuki Kawabe, Hidetaka Nambo

326

TA6-1 (72)

Estimation of stress state by pulse wave at the time of using BCI

Hiroshi Yoneyama, Tadanobu Misawa†, and Shigeki Hirobayashi

330

TA6-2 (74)

Designing a Instant Messaging system for communicating with aphasia affected people

Sazzad Hossain†, Masato Takanokura††, and Kenichi Nakashima†††

336

TA6-3 (76)

A fatigue estimation system by analyzing user walking motions

with “Kinect”

Masahiko Ogura†, Haruhiko Kimura, and Hidetaka Nambo

342

TA6-4 (97)

Design and Analysis of Automated Guided Vehicle System under Single-Loop and Bi-Directional Layouts.

Tzu-Li Chen, James C. Chen, Wen-ChiehPeng, Pei-Hsiu Chiu†, Ching-Yi Kuo and Yen-Shuo Sun

348

TA6-5 (100)

Simulation Modeling and Analysis of AGV Transportation System in Medical Appliances Manufacturing Plant

James C. Chen, Wen-Chieh Peng, Yu-Ching Teng†, Tzu-Li Chen, Ching-Yi Kuo, Yen-Shuo Sun

355

TA6-6 (106)

Recognition of speech attitude using optical flow

Naoki Taguchi†, Haruhiko Kimura, and Hidetaka Nambo

362

TA6-7 (130)

Automatic crack detection in textured metal surfaces using machine vision

Du-Ming Tsai† and Yi-Jun Xie

369

TA6-8 (141)

A Study of Eye Pointing in Virtual Environment

(26)

TA6-9 (242)

Language-independent Word Acquisition Method Using State Transition Model

Bin Xu, NaohideYamagishi, Makoto Suzuki†, Masayuki Goto

382

TOPIC: LOGISTICS

December 11th

FM7-6 (370)

Multi-Objective Optimal Scheduling for Jobshop Under Machine Breakdowns

Anh Dinh Le The† and Phong Ho Thanh

389

FM7-7 (371)

The Orienteering Problem with Time Windows and Arc Scores

Vincent F. Yu, A.A.N. Perwira Redi †, and Parida Jewpanya

397

FM7-8 (372)

Review of energy storage system for smart grid: comparison of governmental policies

Su-Jin Youn†

403

FM7-10 (376)

How non-performing loans affect the efficiency and productivity of Vietnamese commercial banks: A non-parametric assessment

Viet Long Nguyen and Phuong Anh Nguyen†, Michel Simioni

411

FM7-9 (375)

Impact of SEO on trust in online context

Hanh Nguyen T.H.†, Linh-Lang Tang

420

TOPIC: MANAGEMENT

December 11th

FM1-3 (107)

Ontology-based patent search for business methods in industrial systems

Hoang-Minh Nguyen and Hong-Quang Nguyen†

423

FM1-4 (120)

Problem-solving Method Utilizing Collective Intelligence

Satoshi Kiriyama†, Mami Murata, Reiko Yabe, Masashi Miura,

Yoshifumi Ohbuchi

432

FM1-6 (152)

Work Compatibility Assessment for Assembly Line Tasks

Chun-Wei Peng†, Yen-Ting Liu, and Chien-Chi Chang††

(27)

FM1-10 (182)

Environmental pollution aspects from Port industry: A case of Saigon Port, Vietnam

Bang Quoc Ho†, Phuong Kieu Lan Nguyen††

444

FM1-8 (207)

Technology opportunities discovery based on firms' technology capabilities by using collaborative filtering

Youngjin Park and Janghyeok Yoon†

452

FM1-7 (244)

An Optimal Switching Model for Parallel Production System with Multiple Periods

Jing Sun†, Xianda Kong, Hisashi Yamamoto, Peiya Song††, Masayuki Matsui†††

456

FM1-5 (417)

INVESTIGATE FACTORS IMPACTING ON RELATIONSHIP OF VIETNAMESE CUSTOMERS AND DISTRIBUTORS IN SUPPLY CHAIN

Anh Duong†

462

FM1-9 (237)

Synchronization of furniture company packing operations with Kanban system

Thi Diem Chau Le† and Ngoc Hien Do ††

468

FM1-1 (424)

Resilience improvement in supply chain network design

Kanokporn Rienkhemaniyom†, Subramanian Pazhani, Udom

Janjarassuk

475

FM1-2 (425)

ESTIMATION OF DROP OUT DETERMINATION BASED ON STUDENTS CUMULATIVE GRADE-POINT AVERAGE USING DECISION TREE AND NAÏVE BAYES ALGORITHMS

Agus Mansur†, Harwati††, and Grahita Prisca Brilianti†††

483

TOPIC: MCDM

December 10th

TA5-7 (313)

Enhancing Forest Optimization Algorithm for Order Acceptance and Scheduling

Truc Do Vinh

(28)

TA5-8 (343)

An Application Of The Fuzzy ELECTRE Method For Recruiting Lecturer: A Case Study At International University - Vietnam National University Ho Chi Minh City _– Vietnam

Ngan Dao Anh Kim, Hang Vu Thi Thanh, Truc Do Vinh†, Hoa Nguyen Thi Minh, and Ngoc Huynh Minh

495

TA5-9 (349)

The Analytical Hierarchy Process Based Study for Sustained Quality Engineering Practices

Mehran Doulatabadi† and Sha’ri Mohd Yusof

503

TA5-10 (357)

Stylistic Analysis of English Interviews

Hiromi Ban†, Haruhiko Kimura, Takashi Oyabu

509

TOPIC: METAHEURISTIC

December 9th

WM4-3 (143)

Solving Facility Rearrangement Problem using a Simulated Annealing Based Algorithm

Atsushi Suzuki†, Hisashi Yamamoto

516

WM4-2 (4)

Using Hybrid Forest Optimization Algorithm For Independent Jobs Scheduling On Computational Grids

Truc Do Vinh†

523

WM4-1 (298)

Minimization of Makespan in Multi-Door Cross Docking Problems by Particle Swarm Optimization

Warisa Wisittipanich† and Piya Hengmeechai

530

WM4-1 (298)

Minimization of Makespan in Multi-Door Cross Docking Problems by Particle Swarm Optimization

Warisa Wisittipanich† and Piya Hengmeechai

530

TOPIC: OPERATIONS RESEARCH 1

December 11th

FM5-8 (323)

Analysis of Y-shaped self-balancing production line with walk-back and travel time

Daisuke Hirotani†, Katsumi Morikawa and Katsuhiko Takahashi

(29)

FM5-9 (330)

Evaluating Factors Affecting Competitive Advantage of Third-Party Logistics in Taiwan FEPZ

Ling-Lang Tang†, Chien-Sung Chen, and Po-Chun Tseng

544

FM5-7 (322)

A Coordination Algorithm for Constrained Two-Dimensional Rectangle Cutting Stock Problem

Calvin K. Yu† and Yu-Ming Su

552

FM5-10 (339)

Optimal arrangement problems for the Multi-state consecutive-k-out-of-n:F system in case of max{kj}=2

Naoki Yoshida†, Hisashi Yamamoto††, Xiao Xiao†††, Koji Singyochi††††, Tomoaki Akiba†††††

557

TOPIC: OPERATIONS RESEARCH 2

FM4-10 (344)

Three Well-trained Workers’ Assignment Optimization under Limited-cycle Model with Multiple Periods

Xianda Kong†, Peiya Song, Hisashi Yamamoto, Jing Sun, Masayuki

Matsui

564

TA4-10 (38)

Proposal Of Statistical-Mechanics Model For M/M/1 Queueing System With Balking

Kosuke Tamura†, Ikuo Arizono, Wakana Kato, Yasuhiko Takemoto††

571

TM4-1 (71)

Adaptive Prediction Method Based on Alternating Decision Forests considering generalization ability

Shotaro Misawa†, Kenta Mikawa and Masayuki Goto

579

TM4-2 (75)

A Statistical Prediction Model of Students’ Success Date on Job Hunting Using Internet Portal Sites Data

Kan Yamagami †, Kenta Mikawa, Masayuki Goto, Tairiku Ogihara

587

TM4-3 (87)

Developing a Variables Multiple Dependent State Sampling Plan with Consideration of Process Yield and Quality Loss

Zih-Huei Wang and Chien-Wei Wu†

595

TA4-9 (410)

The Steady-State Model for Research in Operations Management and Decision Sciences

R. Dekkers†

(30)

TA4-1 (133)

A Tightened-Normal-Tightened Sampling System by Variables Inspection for Product Acceptance Determination

Chia-Chen Lin and Chien-Wei Wu†

608

FM4-2 (89)

An operational planning for project-based production in

consideration of worker’s learning effects

Yoshihiko Suzuki†, Nobuaki Ishii, Masaaki Muraki

613

TA4-2 (157)

Improvement of Attribute Classification Method for Pedestrians Using Plantar Pressure Value

Takuya Tajima†, Takehiko Abe, Haruhiko Kimura

620

TA4-3 (222)

Intermittent Demand Classification and Demand Forecasting for Medical Materials

Shao-Chun Hung†, Chen-Yang Cheng††

628

TA4-4 (262)

Appointment scheduling and consultation sequencing under the stochastic arrival of walk-ins

Katsumi Morikawa†, Katsuhiko Takahashi, Keisuke Nagasawa

633

FM4-3 (281)

A large-scale parallel-aisle order-picking model for a joint order batching and policy selecting problem

Thuy Mo Nguyen, Jihyun Kim, Nahyeon Kim, and Soondo Hong†

641

FM4-6 (289)

MINIMIZING THE WORST CASE PREDICTION ERROR TO DETERMINE THE SYSTEMATIC ERRORS OF MULTI-AXIS MACHINE TOOLS

Chung Nguyen Van†

647

FM4-4 (284)

Algorithm for obtaining optimal arrangement of a connected-(r,s)-out-of-(m,n):F system – the case of m = r+1 and 2s>n –

Toru Omura †, Hisashi Yamamoto ††, Xiao Xiao †††, Tomoaki Akiba ††††

652

FM4-7 (295)

An approach for noise patent filtering based on Shannon entropy and latent Dirichlet allocation

Mujin Kim, Janghyeok Yoon†

(31)

TA4-6 (327)

AN INTEGRATION OF CLUSTER- BASED OPTIMIZATION APPROACH IN CAPACITATED VEHICLE ROUTING PROBLEM WITH TIME WINDOWS: CASE STUDY OF THO PHAT COMPANY, VIETNAM

Thao Dao Phuong, Hoang Huy Nguyen†

664

FM4-8 (331)

Design of a Status Monitoring System with Human Action Recognition based on Divided Body Regions

Yusuke Saito†, Hiroyuki Nishiyama

675

TA4-7 (350)

Designing a multi-linguistic text mining framework for evaluating customer responses in social network marketing

Hoanh-Su Le†, Jong-Hwa Lee, Hyun-Kyu Lee††

682

TA4-8 (403)

A Joint Replenishment Inventory Model for Imperfect Quality Items with Shortages

The Jin Ai †, Ririn Diar Astanti††, Dah-Chuan Gong†††

690

FM4-1

(421) The Identification of Stakeholders’ Necessity On the Planning of the Virtual Organization For Blood Management

Agus Mansur†, Iwan Vanany††

695

TOPIC: OPTIMIZATION

December 11th

FM8-3 (378)

Portfolio Optimization Using Forest Optimization Algorithm

Truc Do Vinh†

702

FM8-4 (379)

An Integer Linear Programming for Midterm Examination Timetabling Problems

Truc Do Vinh†

707

FM8-5 (381)

A new ontology-based methodology applied to the Cloud Manufacturing

Asma Talhi, Jean-Charles Huet†, Virginie Fortineau, Samir Lamouri

712

FM8-2 (430)

Tour Reservation Scheduling for Tourism Company

Van Dao Thi Bich†, Phong Ho Thanh

(32)

TOPIC: OPTIMIZATION TECHNIQUES - METAHEURISTIC

December 9th

WA4-7 (225)

ALGORITHMIC APPROACH TO OPTIMIZE RESOURCES OF A MANUFACTURING SYSTEM BY USING PETRI NETS

H. Kahouadji, Z. Sari, K. Labadi †, S. Hamac †† and I. El-Abbassi

†††

728

WA4-3 (32)

A Hybrid Genetic Algorithm For Resource Allocation Problem With Uncertainty

James T. Lin†, Chun-Chih Chiu, Ying Xie

734

WA4-8 (241)

A Novel Particle Swarm Optimization with Parameter Evolution

Shu-Fen Li †, Chen-Yang Cheng

740

WA4-4 (188)

Solving Travelling Salesman Problem by Multi-Core CPU and Parallel Programming

Yi-Feng Hung†, Kuan-HuaChen and Kuan-MingChen

748

WA4-2 (179)

Optimal Parallel Machine Allocation in Integrated Circuit Assembly

Wan-Ting Kao†, Kuo-Hao Chang†, Liam Y. Hsieh†

756

WA4-1 (178)

A Response-Surface-based Framework for Efficient Cycle Time Prediction and Parameter Optimization for Complex

Manufacturing in Intelligent Manufacturing

Peng-Chi Chen † and Kuo-Hao Chang

763

WA4-5 (290)

Composite Sustainability Index Computation Using AHP and Considering Quadruple Bottom Line

Willy F. Zalatar † and Anna Bella D. Siriban-Manalang

771

WA4-11 (249)

A Bi-Objective Mathematical Model for a Mixed Green Vehicle Routing Problem with Backhauls

John Steven G. Lee †,Dennis E. Cruz ††

779

WA4-9 (263)

A Discrete Version of the Virus Optimization Algorithm (DVOA)

Yun-Chia Liang †, Josue Rodolfo Cuevas Juarez

(33)

WA4-10 (278)

Deterministic Model for Production Planning of Solar Cell Manufacturing

Yi-Feng Hung†, Tso-Yi Wang††, and Geng-Hao Liao†††

795

WA4-6 (211)

Optimization for long-term breeding programs

Azuma Okamoto†

802

TOPIC: PRODUCT DESIGN AND DEVELOPMENT

FM7-1 (121)

Effect of ergometer exercise on sleep quality

Jianfu Chen and Dengchuan Cai †

807

FM7-2 (311)

Development of the Android Based _– Ergonomic Interface Design for the Electrical Car

Hartomo Soewardi, Yanuar Anaba Wahyuesa †

812

FM7-3 (355)

A Framework for Designing Product Service Systems Which Considers User Co-creation

Tuan Anh Tran and Joon Young Park †

818

WA5-2 (360)

Continues Improvement Cycle of Usability Analysis for Educational Purposes in Laboratory Website

Egah Hasta Puspawardhani †, Amarria Dila Sari ††, Muhammad

Ragil Suryoputro, Yuli Agusti Rochman, Ratih Dianingtyas Kurnia

826

TOPIC: PRODUCT PLANNING AND MARKETING

December 9th

WM7-1 (10)

Optimal Pricing Strategies For Internet Marketing On Time-Sensitive Products

Ping-Hui Hsu †, Hui-Ming Teng

832

WM7-2 (11)

Optimal Sale Number Of Kind For Specialized Shop With Increasing Demand

Hui-Ming Teng †, Ping-Hui Hsu

838

WM7-3 (240)

Three-Dimensional Clearing Functions for Production Planning

Yi-Feng Hung, Chun-Che Chen, Pei-Ying Wang, Po-Yi Wu †

(34)

TOPIC: PRODUCTION AND OPERATIONS MANAGEMENT

December 9th

WA1-9 (5)

An Application Of Rfid For Inventory Management: A Case Study Of Nhabe Garment Corporation

Son Nguyen Hoang and Truc Do Vinh†

849

WA1-2 (275)

Designing a Supply Chain Network for Deteriorating Inventory under Trade Credit and Partial Backordering

Yu-Chung Tsao † and Thuy Linh Vu

856

WA1-7 (49)

Understanding Of Iterate Mocega Model Based On Project Management Process -On The Motivation Enhancement Model For Is Development

Project-Erika Niwa † and Tetsuro Seki

862

WA1-3 (94)

Assembly Line Type III Problem of Footwear Industry

Yin-Yann Chen, James C. Chen, Chun-Ju Lin, Hsin-Yu Shih †

870

WA1-4 (103)

A Genetic Algorithm for Type-E Assembly Line Balancing Problem in Footwear Industry

Yin-Yann Chen, James C. Chen, Chieh-Ying Lin, Yu-Xuan Lin †

877

WA1-5 (105)

Apply Grouping Genetic Algorithm to Develop an Assembly Line Balancing System for Apparel Industry

Yin-Yann Chen, James C. Chen, Yi-Hsin Hul, Qi Hua †

884

WA1-8 (116)

Proposal of Continuous Mieruka Activities in the IT firm

Hiroshi Ohtaka †

891

WA1-6 (138)

A study on the seat setting of the Production Seat Booking System for Make-To-Stock Manufacturing Process

Chihiro Hayashi†, Hisashi Yamamoto, Masaaki Ohba, Mitsuyoshi

Horikawa

899

WA1-1 (162)

An Integer Program and a Heuristic Algorithm for the University Timetabling Problem

Xuefao Feng, Yuna Lee, Minsu Kim, Ilkyeong Moon †

(35)

WA1-12 (288)

Study Program Ranking Determination Based on Brand Association Analysis

Yulianti Talar †

915

WM1-1 (338)

Design of the Independent Manufacturing Systems for Packaging Development of the Shredded Vegetable

Hartomo Soewardi, Angga Wisudianto †

921

WM1-2

(402) Work Load Analysis of Hotel’s Shift Scheduling in Yogyakarta Indonesia

Deny RatnaYuniartha†, Luciana Triani Dewi††, Ign. Luddy Indra Purnama†††

929

WA1-11 (418)

Lean Production: Nothing More Than the Learning Curve?

R. Dekkers †

936

WM1-3 (414)

Implementation of Inventory System by P(R,T) model with Differenced Time of Known Priced Increase at PT Inti Vulkatama

Kinley Aritonang †, Carles Sitompul. Alfian

944

TOPIC: PRODUCTION DESIGN AND DEVELOPMENT

December 9th

WM2-2 (20)

Applying Triz And Multi-Attribute Utility Theory To Develop Innovative Designs: A Case Study Of Carbohydrate Detecting Device

Min-Feng Weng, Szu-Han Tzao, and Ming-Chuan Chiu†

950

WA2-8 (28)

An Endeavor Regarding Student Assistants And Their Personal Growth Through Information Education In Junior College

Yumi Tatsushima †

958

WA2-7 (61)

An approach to identify target products of patents

Janghyeok Yoon †, Namuk Ko, Youngjin Park, Mujin Kim, Hayoung

Choi, Jae-Min Lee, Inseok Song, Hong-Woo Chun, and Byoung-Youl Coh

963

WA2-4 (147)

User Centered Design Approach: Ergonomic Innovative Design of the Ironing Table

Hartomo Soewardi and Damang Suhdi Lubis †

(36)

WM2-3 (112)

VA/VE on fabrication of stainless steel Kitchen Equipment using 304 vs 430

Maricar M. Navarro†, Rosalia F. Gabuya, Jasy M. Bangayan, Jaypee

T. Tenerife, Jocelyn D. Abadand Richard A. Abayhon, Bryan B. Navarro

974

WA2-11 (149)

Minimization of Fuel Consumption for the CVRP of a Consumer Product Manufacturer by using a Modified Saving Heuristic

Ruengsak Kawtummachai†, Tsutomu Shohdohji

982

WA2-5 (158)

Independent Design Parameters of the Ergonomics Gloves

Hartomo Soewardi, Faddli Bill Iman Manik†, and Kamariah

989

WA2-1 (155)

Enjoyable Pressure Cooker: Redesigning Physical Form of Products Based on Product Emotions and Usability Criteria

Thedy Yogasara † and Winna Citra

997

WA2-2 (164)

Development and design of Water Purifier.

Tingkai Chang, Dengchuan Cai †

1005

WA2-3 (175)

Design Method of Cpm-Index based on Product Performance and Manufacturing Cost

Akimasa Otsuka † and Fusaomi Nagata

1013

WA2-9 (215)

Analyzing Technical and Social Dimension in Knowledge Sharing Intention Behavior in E-learning System

Ceicalia Tesavrita †, Ike Mercia Yusuf, Kadarsah Suryadi

1021

WA2-10 (267)

Knowledge management system for Universal Design training

Seiichiro Miura, Sakiko Ogoshi †, Yasuhiro Ogoshi, Hayashi Naohiro,

Takashi Yoshioka, Hiroshi Yamaguchi, Nishi Hitoshi

1026

WA2-6 (394)

Triple Bottom Line Optimization for Sustainable Product Design

Zahari Taha †, H. A. Salaam ††, T.M.Y.S. Tuan Ya

1032

WM2-1 (16)

Value Analysis Of Coco Board For Production Sustainability

Marianne B. Calayag †

(37)

TOPIC: QUALITY MANAGEMENT

December 10th

TM1-1 (30)

Construct An Appropriate Mixed Model For Monitoring Nonlinear Profile Process

Chih-Hung Jen †, An-Ting Tsai, Shu-Kai S. Fan

1046

TM1-2 (35)

A Study On Information Visualization Of Changes In Process Mean And Dispersion On (X_Bar,S) Control Chart

Yasuhiko Takemoto †, Ikuo Arizono

1053

TM1-3 (36)

Variable Repetitive Group Sampling Plan With Screening For Permissible Average Outgoing Surplus Quality Loss Limit

Yusuke Okada †, Ikuo Arizono, Ryosuke Tomohiro, Yasuhiko

Takemoto

1059

TA1-1 (37)

Comparison Of Exact With Approximate Procedures For Designing Variable Sampling Plans Indexed By Quality Loss

Yoma Ishii †, Ikuo Arizono, Ryosuke Tomohiro, Yasuhiko Takemoto

1067

TA1-2 (84)

Lens collar defect inspection using randomized singular value decomposition

Ssu-Han Chen †

1074

TA1-3 (128)

A Variables Two-Stage Sampling Plan Based on the Process Capability Index

Tsung-Yueh Chen and Chien-Wei Wu †

1079

TA1-4 (131)

Designing of Variables Quick Switching Sampling System Based on the Loss-based Capability Index

Ya-Han Chuang and Chien-Wei Wu †

1084

TA1-5 (134)

Developing an Acceptance Sampling Plan Based on the Lifetime Performance Index Under Gamma Distribution

Cheng-Hsuan Liu and Chien-Wei Wu †

(38)

TOPIC: RELIABILITY - PROBABILITY MODEL

December 10th

TM9-1 (92)

Testing Plans for Weibull Lifetime Products with the Upper Record Values

Duan Li, Chien-Wei Wu † and Kuan-Chieh Chen

1095

TA9-1 (416)

The Construction of The Integrated Problem Solving Model- I8D from The Perspective of Lean Six Sigma _– Case Study in Shoe Last Industry

Jui-Chin Jiang and Thi-Anh-Tuyet Nguyen †

1101

TM9-2 (109)

Queuing Theory Application using Model Simulation: Solution to address congestion Port in Manila

Maricar M. Navarro †, Rose Marie Lou P. Bano, Mark David C.

Cheng, Mel Benjamen Torres,Yoshiki B. Kurata, Ma. Teodora E. Gutierrez

1109

TA9-3 (197)

The Impact of Downtime Cost on Replacement Policies for Repairable Two-Component Series Systems.

Mei-Wei Wang †, Tzu-Chun Hsu, Ruey-Huei Yeh, Wen-Liang Chang

1115

TA9-4 (198)

The Effect of Setup Cost on Replacement Policies for Repairable Two-Component Parallel Systems

Yu-Wei Hsu †, Ruey-Huei Yeh ††, Wen-Liang Chang †††

1122

TA9-5 (199)

Supply Chain Design for Vietnam Milk-apple

Tan Bui Duy † and Phong Ho Thanh

1129

TA9-10 (219)

Energy optimization of industrial platforms

I. El Abbassi † , K. Labadi ††, A.-M. Darcherif †††, S. Hamaci

1137

TA9-6 (202)

APPLICATION OF KALMAN FILTER AND ADAPTIVE-NETWORK-BASED FUZZY INFERENCE SYSTEM IN INDOOR LOCALIZATION

Wei-Chieh Hsiao, Chin-Chang Yu †, Chen-Yang Cheng ††

(39)

TA9-8 (216)

CAPACITY-CONSTRAINED PRODUCTION-INVENTORY SYSTEMS WITH NON-ZERO LEAD TIMES AND WITH STOCHASTIC DEMAND _– A CASE STUDY IN THE CAR MANUFACTURING

Thuy Huynh Thi Thu †

1148

TM9-3 (156)

Multi-Objective Optimization For Factory Layout Planning

Phong Nguyen Thanh and Phong Ho Thanh†

1156

TA9-9 (217)

Reference architecture for modeling the dynamic behavior of smart manufacturing systems

Samir HAMACI † , Ikram EL-ABBASSI , Milka UZUNOVA and A. -

Moumen DARCHERIF

1165

TA9-7 (212)

Outpatient Scheduling in Healthcare: Improve the Efficiency for a Hospital

Phong Ho Thanh, Quoc Ho Doan and Nguyen Nguyen Truong †

1171

TOPIC: SCHEDULING AND SEQUENCING

December 9th

WM3-2 (53)

Scheduling Of Inbound And Outbound Trucks In Cross Docking Systems Without Temporary Storage

Wu, Gen-Hanu †; Chen, Ke-Hsuanu †† and Chen Yi-Ting

1178

WM3-3 (57)

Project Portfolio Selection and Scheduling: a Case of an IC Design Company in Taiwan

Chen-Fu Chien † and Nhat-To Huynh

1185

WA3-10 (186)

The Application of Integer Programming in Bus Management: A Case Study

Chompoonoot Kasemset †, Karn Verochana, Sutthiphong Khonthiang

1193

WA3-2 (194)

A Production Scheduling Model Considering Cutting Tools for an FMS to Minimize Makespan

Ari Setiawan†, Rachmawati Wangsaputra, Abdul Hakim Halim, Yatna

Yuwana Martawirya

(40)

WA3-3 (233)

Minimizing Earliness and Tardiness Cost in the Scheduling of Jobs with Time Windows

Yi-Feng Hung, Jian-Song Bao and Yu-En Cheng †

1205

WA3-7 (300)

APPLICATION OF ANT COLONY OPTIMIZATION IN ORDER PICKING PROBLEM AND SCHEDULING PROBLEMS

Khanh Le†, Phong Ho Thanh † and Quoc Ho Doan

1213

WA3-5 (234)

Mixed Integer Programming for Order Selection and Scheduling with Maintenance Policy

Yi-Feng Hung, Chia-Hui Chien and Bin-Kai Xu †

1220

WA3-6 (273)

Direct-shipment and Out-sourcing Strategies in Supply Chain Network Design

Duong Vo Hung† and Bui Nguyen Hung

1228

WA3-8 (312)

A process-oriented mechanism combining life cycle assessment in new product development

Jiun-Shiung Lin, Wen-Lie Hsu, Chun-Kai Chou, Jen-Huei Chang †

1237

WA3-9 (320)

Evaluation of the Applicability of Investment Appraisal Techniques for Warehouse Management System to Improve Logistics Service

Tung Nguyen Nhu †

1242

WA3-4 (321)

Mixed Integer Programming for Order Selection and Scheduling on Parallel Machines

Yi-Feng Hung †, Jia-Shain Lin and Wai-Kin Sou ††

1250

WA3-1 (332)

Semantic Negotiation for Process Reconfiguration in Manufacturing Systems

Sangil Lee, Hwaseop Lee, Kwangyeol Ryu †, Moonsoo Shin

1258

WM3-1 (401)

Using Entropy Theory to Help Quantify Social Media Data

Hing Kai Chan †, Xiaojun Wang

1266

WA3-11 (426)

Multimodal Transportation Scheduling: The Integrated Model of Waterway and Road Transportation

Apichit Manee-ngam † and Apinanthana Udomsakdigool ††

(41)

TOPIC: SERVICE MANAGEMENT

December 10th

TA2-8 (12)

Effect of Firm Age in Expected Loss Estimation for Small Sized Firms

Kenzo Ogi †, Masahiro Toshiro, Norio Hibiki

1280

TA2-1 (21)

A Systematic Product Service System Design Methodology Based on Dissatisfied Customers _– A Case Study of Clothes Industry

Chih-Yuan Chu, Chih-Chuan Chen and Ming-Chuan Chiu †

1288

TA2-4 (127)

System Informatics-based New Service Development: A Conceptual Framework

Kwang-Jae Kim†, Chie-Hyeon Lim, Jun-Yeon Heo, Ryeok-Hwan Kwon, Min-Jun Kim, Ki-Hun Kim, and Chang-Ho Lee

1297

TA2-9 (26)

Interest Rate Risk Management Model In Banking Book - A Comparison Between Modified Periodic Income Approach And Economic Value

Approach-Junta Iwakuma †, Norio Hibiki ††

1303

TA2-3 (117)

Bonus-based Contract Design for Golden Real-Estates -A Case Study of Convenience Stores

Muh-Cherng Wu †, Shen-Hsien Huang, Chi-Jung Chang

1311

TA2-5 (171)

Design of Service Quality of Bus Rapid Transportation System

Agung Setiabudi and Muhammad Akbar †, Dradjad Irianto ††

1316

TA2-6 (205)

A recommended system for the mobile phone market in Japan

Bin Fang †, Taichi Fujita, Hidetaka Nambo and Haruhiko Kimura ††

1321

TA2-7 (264)

Relationship Marketing, Service Quality, Customer Satisfaction and Loyalty － A Case Study on Taiwan's Motel Industries

Angela Hsiang-Ling Chen, Yun-Chia Liang†, Chen-Shin Tsai, Jason Zu-Hsu Lee

(42)

TOPIC: SIMULATION

December 10th

TM2-3 (9)

A Hybrid Approach For Multi-Depot Vrp With Simultaneous Pickup And Delivery Incorporated With Weber Basis Saving Method

Yoshiaki Shimizu†, Tatsuhiko Sakaguchi, Jae-Kyu Yoo

1332

TA1-7 (47)

Transit Planning With Variable Cost Reduction For Multi Product Categories In Semiconductor Industry

Hiroshi Okamoto †, Takashi Irohara, Hans Ehm and Géraldine Yachi

1340

TA1-8 (50)

On Project Manager Model For Multi Agent Simulation -Analysis Of Is Development Project Performance Using Multi Agent

Simulation-Shin-nosuke Yokota † and Tetsuro Seki

1348

TA1-9 (63)

Basic studies of Evacuation Simulation in Supermarket

Masamichi Nitta†, Naohito Okuya, Hidetaka Nambo and Haruhiko

Kimura

1356

TA1-10 (136)

Simulation Modeling and Analysis for Footwear Stitching Lines

James C. Chen,Yung-Sheng Su, Yu-Cheng Chang†, Tzu-Li Chen

1362

TA1-6 (169)

MTS and GRNN based Feature Selection and Modeling in Semiconductor Manufacturing

Chien-Chih Wang †, Bing-De Wu and Chien-Yu Lin

1369

TM2-2 (200)

Improvement operations in a seaport using simulation A case of a Vietnam seaport

ThinhChu Ly Phuoc †, HanhDo Nguyen Vinh and Phong Ho Thanh

1372

TOPIC: SUPPLY CHAIN MANAGEMENT

December 9th

WA7-2 (13)

Supply Chain Performance Improvement By Incorporating Green Practices

Kanchan Das †, R.S. Lashkari

(43)

WA7-3 (18)

Optimal Operation For Green Supply Chain With Uncertainties In Product Demand And Collection Quantity Of Used Product

Naoto Takahashi† and Etsuko Kusukawa

1392

WA7-4 (23)

Optimal Operation For A Dual-Sourcing Green Supply Chain With Contracts Of Collection And Recycling Activity

Naoki Watanabe†, Etsuko Kusukawa

1400

WA7-5 (33)

Mean-Variance Analysis For Optimal Operation In A Green Supply Chain

Shin Yamaguchi†, Hirofumi Goto and Etsuko Kusukawa

1408

WA7-6 (52)

An Interactive Possibilistic Programming Approach For Closed-Loop Supply Chain Network Design Under Uncertainty

Gen-Han Wu†, Lo-Mei Hsu††, Chen-Kang Chang

1416

WM8-1 (69)

Optimal Operation for A Green Supply Chain with Supply Disruption in Remanufacturing Process

Naoki Watanabe†, Etsuko Kusukawa

1424

WA7-7 (70)

Optimal Safety-stock Policies for a Supply Chain under Forecast Errors

Kimitoshi Sato†, Kenichi Nakashima, Han Ting Ting

1432

WA9-3 (17)

Improving Short-Term Load Forecasting By Using Arima

Jirapat Wanitwattanakosol † and Prompong Sugunnasil

1439

WA9-6 (77)

Risk Analysis and Supply Chain Coordination for Optimal Operation in E-commerce Environment with Uncertainties in Demand and Customer Returns

Yuta Saito and Etsuko Kusukawa†

1445

WA7-8 (90)

TOC-Supply Chain Replenishment System in LED Chip Manufacturers

Lun-Meng Sun †, Horng-Huei Wu

1453

WA7-9 (93)

Computational Analysis of Integrated Supply Chain in Asia

Tzu-Li Chen, Sonia M. Lo, James C. Chen, Nadia Aulia Arifin, Harry

Harianto†, Janet Chen and Yun-Wei Hung

(44)

WA7-10 (95)

Effects of active response of consumers to stockout on performance of fashion supply chain

Berdymyrat Ovezmyradov†, Hisashi Kurata

1468

WM8-2 (108)

Developing Metrics for Humanitarian Supply Chain

Takeo Kobayashi, Yasutaka Kainuma†, Yacob Khojasteh

1475

WM8-3 (119)

Process Improvement and Cycle Time Reduction in the

Checking and Loading Process of the Outbound Department in a Logistics Company

Yoshiki B. Kurata †, Elisha Faith F. Gala, Joshua Gilmore R. Peralta,

Gerald O. Semifrania

1481

WA9-2 (125)

Devising of a Method for Designing Jigs Based on Assembly Sequences in Virtual Factory

Tomoki Nogi†, Hiroki Matsumoto, Takuya Hida, Toshiyuki

Matsumoto, Yuki Matsui, Shinji Shinoda

1489

WA8-1 (126)

An Ant Colony Optimization for the Vehicle Routing Problem with Cross-docking

Chi-Yuan Luo and Ching-Jung Ting†

1496

WA8-2 (132)

Reengineering Assembly line Using Lean Techniques: A Case Study

Minh-Nhat Nguyen, Ngoc-Hien Do ††

1502

WA8-4 (174)

Developing a Multi-Agent System for Supply Chain Production Planning Coordination

Yeh-Chun Juan†

1509

WA9-11 (180)

Automatic and Intelligent Control of Environmental Factors for Smart Space

Tsung-Hsi Tsai and Kuo-Hao Chang †

1515

WA9-12 (181)

Solving the Reliability Redundancy Allocation Problem Using Simulation Optimization

Po-Yi Kuo and Kuo-Hao Chang †

1520

WA8-5 (230)

A Study on Capacity Planning for Reentrant Hybrid Flowshop

Geun-Cheol Lee, Jeong Man Hong, Jung Ug Kim, Seong-Hoon Choi†

(45)

WM9-3 (239)

Mixed Integer Programming for Job Splitting in Parallel Machines

Yi-Feng Hung, Wen-Ting Chang and Yu-Ting Lin †

1530

WA8-6 (246)

Carbon Footprint for Organization and Reduce of greenhouse gas for steel industry in Thailand

Prasit Kailomsom † and Suksan Prombanpong

1537

WA8-7 (256)

Multi-vendor-Single-buyer Transportation Model with Heterogeneous Vehicles for Perishable Product

David Try Liputra †, Ika Deefi Anna ††, Winanda Kartika

1542

WA8-8 (258)

Optimal Discount Rate for Quantities Discount Strategy with Revenue Sharing policy in a decentralized Retail Network

Chang, Ping-Yu† and Chang, Chia-Chun

1547

WA8-10 (291)

Design a Supply Chain Network for Vietnamese Ginseng Product

Luong Nhieu Nhat, Phong Ho Thanh †and Anh Truong Dai Tram

1552

WA8-9 (261)

Truck Appointment System for Transshipment Containers in Teminals

Mai-Ha Phan†, Kap Hwan Kim

1559

WM9-1 (294)

Consumer Analysis for Increasing Occupancy Rates of Tourism Hotel

Jimmy Gozaly†

1567

WA9-1 (319)

An Upstream Rubber Supply Chain Model of Thailand By Hybrid Simulation Approach

Chawalit Manisri† and Juta Pichitlamken

1573

WA9-10 (400)

A Heuristic Approach to the Operational Problem of Vendor-managed Inventory in Retail Supply Chains

Yang-Byung Park †, Jun-Su Yoo and Sung-Joon Yoon

1581

WA9-4 (380)

Importing Lean production improvement research status - semiconductor packaging plant, for example

Chia-Chi Hsu † and Chen-Yang Cheng ††

1585

WA8-3 (386)

Web-based Service System for House Recommendation

Chia-Yu Hsu†

(46)

WA7-11 (392)

Bidirectional Option Contract in a Two-Period Newsvendor Problem

Huynh Trung Luong† and Takron Opassuwan

1598

WA9-7 (393)

Building a strategic management dashboard for improving the green sup